======================================= Appendix D: Description of Model Fields ======================================= | | Every field that may be read or written in a NetCDF *stream* (as described in `Configuring Model Input and Output <./configuring_io.html>`_) by the MPAS-Atmosphere model is described in this chapter. The dimensionality of each field is given in Fortran storage order (i.e., the fastest-varying dimension is inner-most). | | **a_tri** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units, " " Description,implicit tridiagonal solve coefficients Accessed in code, as a_tri from the diag | **absnxt** (real) (nVertLevels, cam_dim1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units, " " Description,Total nearest layer absorptivity Accessed in code, as absnxt from the diag_physics | **abstot** (real) (nVertLevelsP1, nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units, " " Description,Total absorptivity Accessed in code, as abstot from the diag_physics | **aclwdnb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky downward surface longwave radiation flux Accessed in code, as aclwdnb from the diag_physics | **aclwdnbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky downward surface longwave radiation flux Accessed in code, as aclwdnbc from the diag_physics | **aclwdnt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky downward top-of-the-atmosphere longwave radiation flux Accessed in code, as aclwdnt from the diag_physics | **aclwdntc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky downward top-of-the-atmosphere longwave radiation flux Accessed in code, as aclwdntc from the diag_physics | **aclwupb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky upward surface longwave radiation flux Accessed in code, as aclwupb from the diag_physics | **aclwupbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky upward surface longwave radiation flux Accessed in code, as aclwupbc from the diag_physics | **aclwupt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky upward top-of-the-atmosphere longwave radiation flux Accessed in code, as aclwupt from the diag_physics | **aclwuptc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky upward top-of-the-atmosphere longwave radiation flux Accessed in code, as aclwuptc from the diag_physics | **acsnom** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` Description,accumulated melted snow Accessed in code, as acsnom from the diag_physics | **acsnow** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` Description,accumulated snow Accessed in code, as acsnow from the diag_physics | **acswdnb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky downward surface shortwave radiation flux Accessed in code, as acswdnb from the diag_physics | **acswdnbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky downward surface shortwave radiation flux Accessed in code, as acswdnbc from the diag_physics | **acswdnt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky downward top-of-atmosphere shortwave radiation flux Accessed in code, as acswdnt from the diag_physics | **acswdntc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky downward top-of-atmosphere shortwave radiation flux Accessed in code, as acswdntc from the diag_physics | **acswupb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky upward surface shortwave radiation flux Accessed in code, as acswupb from the diag_physics | **acswupbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky upward surface shortwave radiation flux Accessed in code, as acswupbc from the diag_physics | **acswupt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated all-sky upward top-of-atmosphere shortwave radiation flux Accessed in code, as acswupt from the diag_physics | **acswuptc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,accumulated clear-sky upward top-of-atmosphere shortwave radiation flux Accessed in code, as acswuptc from the diag_physics | **adv_coefs** (real) (FIFTEEN, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Weighting coefficients used for reconstructing cell-based fields at edges Accessed in code, as adv_coefs from the mesh | **adv_coefs_3rd** (real) (FIFTEEN, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Weighting coefficients used for reconstructing cell-based fields at edges Accessed in code, as adv_coefs_3rd from the mesh | **advCellsForEdge** (integer) (FIFTEEN, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Cells used to reconstruct a cell-based field at an edge Accessed in code, as advCellsForEdge from the mesh | **aerosols** (real) (nAerLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,aerosols is a variable array used in code which is made up of the constituent fields listed below. Accessed in code, aerosols from the state pool | **sul** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Sulfate soluble (SUL) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **sslt** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Sea-salt (SSLT) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **dust1** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Dust type 1 (DUST1) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **dust2** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Dust type 2 (DUST2) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **dust3** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Dust type 3 (DUST3) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **dust4** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Dust type 4 (DUST4) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **ocpho** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Hydrophobic organic carbon (OCPHO) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **bcpho** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Hydrophobic black carbon (BCPHO) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **ocphi** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Hydrophilic organic carbon (OCPHI) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **bcphi** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Hydrophilic black carbon (BCPHI) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **bg** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Background (BG) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **volc** -- constituent field of var_array aerosols .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Volcanic (VOLC) aerosol concentration Units,kg m\ :sup:`-3` Array Group, aer_cam | **albedo12m** (real) (nMonths, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,monthly-mean climatological surface albedo Accessed in code, as albedo12m from the sfc_input | **alpha_tri** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,implicit tridiagonal solve coefficients Accessed in code, as alpha_tri from the diag | **angleEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,rad Description,Angle between local north and the positive tangential direction of an edge Accessed in code, as angleEdge from the mesh | **areaCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` Description,Spherical area of a Voronoi cell Accessed in code, as areaCell from the mesh | **areaTriangle** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` Description,Spherical area of a Delaunay triangle Accessed in code, as areaTriangle from the mesh | **bdyMaskCell** (integer) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Limited-area specified/relaxation zone index for cells Accessed in code, as bdyMaskCell from the mesh | **bdyMaskEdge** (integer) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Limited-area specified/relaxation zone index for edges Accessed in code, as bdyMaskEdge from the mesh | **bdyMaskVertex** (integer) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Limited-area specified/relaxation zone index for vertices Accessed in code, as bdyMaskVertex from the mesh | **br** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Richardson number Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as br from the diag_physics | **canwat** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` Description,water in canopy Accessed in code, as canwat from the diag_physics | **cape** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,J kg\ :sup:`-1` Description,Convective available potential energy Accessed in code, as cape from the diag | **cd** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,drag coefficient at 10-meter Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as cd from the diag_physics | **cda** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,drag coefficient at lowest model level Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as cda from the diag_physics | **cellsOnCell** (integer) (maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of cells neighboring a cell Accessed in code, as cellsOnCell from the mesh | **cellsOnEdge** (integer) (TWO, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of cells divided by an edge Accessed in code, as cellsOnEdge from the mesh | **cellsOnVertex** (integer) (vertexDegree, nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of the cells that meet at a vertex Accessed in code, as cellsOnVertex from the mesh | **cellTangentPlane** (real) (R3, TWO, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Components of a pair of vectors defining the tangent plane at a cell Accessed in code, as cellTangentPlane from the mesh | **cf1** (real) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Surface interpolation weight for level k=1 value Accessed in code, as cf1 from the mesh | **cf2** (real) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Surface interpolation weight for level k=2 value Accessed in code, as cf2 from the mesh | **cf3** (real) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Surface interpolation weight for level k=3 value Accessed in code, as cf3 from the mesh | **ch** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,surface exchange coefficient for heat Allocated by, bl_mynn_in Accessed in code, as ch from the diag_physics | **chklowq** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,surface saturation flag Accessed in code, as chklowq from the diag_physics | **chs** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,surface exchange coefficient for heat and moisture Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as chs from the diag_physics | **chs2** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,surface exchange coefficient for heat at 2-meter Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as chs2 from the diag_physics | **cin** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,J kg\ :sup:`-1` Description,Convective inhibition Accessed in code, as cin from the diag | **circulation** (real) (nVertLevels, nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,Horizontal circulation at vertices Accessed in code, as circulation from the diag | **ck** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,enthalpy exchange coeff at 10-meter Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as ck from the diag_physics | **cka** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,enthalpy exchange coefficient at lowest model level Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as cka from the diag_physics | **cldfrac** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,horizontal cloud fraction Accessed in code, as cldfrac from the diag_physics | **cldfrac_bl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,cloud fraction in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as cldfrac_bl from the diag_physics | **cldfrac_high_UPP** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cloud fraction at high levels using UPP method Accessed in code, as cldfrac_high_UPP from the diag | **cldfrac_low_UPP** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cloud fraction at low levels using UPP method Accessed in code, as cldfrac_low_UPP from the diag | **cldfrac_mid_UPP** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cloud fraction at mid levels using UPP method Accessed in code, as cldfrac_mid_UPP from the diag | **cldfrac_tot_UPP** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Total cloud fraction using UPP column max method Accessed in code, as cldfrac_tot_UPP from the diag | **coeffs_reconstruct** (real) (R3, maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coefficients to reconstruct velocity vectors at cell centers Accessed in code, as coeffs_reconstruct from the mesh | **cofrz** (real) (nVertLevels, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s m\ :sup:`-1` Description,coefficient for implicit contribution of Omega to density update Accessed in code, as cofrz from the diag | **coftz** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s K Description,coefficient for implicit contribution of omega vertical derivative to the theta_m update Accessed in code, as coftz from the diag | **cofwr** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,coefficient for implicit contribution of density to the vertical velocity update Accessed in code, as cofwr from the diag | **cofwt** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` K\ :sup:`-1` Description,coefficient for implicit contribution of density to the vertical velocity update Accessed in code, as cofwt from the diag | **cofwz** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` K\ :sup:`-1` Description,coefficient for implicit contribution of density to the vertical velocity update Accessed in code, as cofwz from the diag | **con** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,orographic convexity Accessed in code, as con from the sfc_input | **coszr** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,cosine of zenith solar angle Accessed in code, as coszr from the diag_physics | **cov** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K kg kg\ :sup:`-1` Description,liquid water - liquid water potential temperature covariance Allocated by, bl_mynn_in Accessed in code, as cov from the diag_physics | **cpm** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,J K\ :sup:`-1` kg\ :sup:`-1` Description,specific heat of dry air at constant pressure at lowest model level Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as cpm from the diag_physics | **cqs2** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,surface exchange coefficient for moisture at 2-meter Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as cqs2 from the diag_physics | **cqu** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,rho_d/rho_m at cell edge (u points) Accessed in code, as cqu from the diag | **cqw** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,rho_d/rho_m at w points Accessed in code, as cqw from the diag | **cubot** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,index of highest level of convection Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in Accessed in code, as cubot from the diag_physics | **cuprec** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm s\ :sup:`-1` Description,convective precipitation rate Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as cuprec from the diag_physics | **cutop** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,index of lowest level of convection Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in Accessed in code, as cutop from the diag_physics | **dcEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Spherical distance between cells separated by an edge Accessed in code, as dcEdge from the mesh | **defc_a** (real) (maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coefficients for computing the off-diagonal components of the horizontal deformation Accessed in code, as defc_a from the mesh | **defc_b** (real) (maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coefficients for computing the diagonal components of the horizontal deformation Accessed in code, as defc_b from the mesh | **delta** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,entrainment layer depth from PBL scheme Allocated by, bl_ysu_in Accessed in code, as delta from the diag_physics | **depv_dt_bl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Diabatic EPV tendency from PBL Accessed in code, as depv_dt_bl from the diag | **depv_dt_cu** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Diabatic EPV tendency from convection Accessed in code, as depv_dt_cu from the diag | **depv_dt_diab** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Sum of calculated EPV tendencies from diabatic processes Accessed in code, as depv_dt_diab from the diag | **depv_dt_diab_pv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Diabatic EPV tendency on dynamic tropopause Accessed in code, as depv_dt_diab_pv from the diag | **depv_dt_fric** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Sum of calculated EPV tendencies from frictional processes Accessed in code, as depv_dt_fric from the diag | **depv_dt_fric_pv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Frictional EPV tendency on dynamic tropopause Accessed in code, as depv_dt_fric_pv from the diag | **depv_dt_lw** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Diabatic EPV tendency from longwave radiation Accessed in code, as depv_dt_lw from the diag | **depv_dt_mix** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Diabatic EPV tendency from explicit numerical mixing Accessed in code, as depv_dt_mix from the diag | **depv_dt_mp** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Diabatic EPV tendency from microphysics Accessed in code, as depv_dt_mp from the diag | **depv_dt_sw** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU s\ :sup:`-1` Description,Diabatic EPV tendency from shortwave radiation Accessed in code, as depv_dt_sw from the diag | **deriv_two** (real) (FIFTEEN, TWO, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,weights for cell-centered second derivative\, normal to edge\, for transport scheme Accessed in code, as deriv_two from the mesh | **det_qv** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,EDMF detrainment of water vapor mixing ratio in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as det_qv from the diag_physics | **det_thl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,EDMF detrainment of liquid-ice potential temperature in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as det_thl from the diag_physics | **dewpoint_100hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 100 hPa Accessed in code, as dewpoint_100hPa from the diag | **dewpoint_200hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 200 hPa Accessed in code, as dewpoint_200hPa from the diag | **dewpoint_250hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 250 hPa Accessed in code, as dewpoint_250hPa from the diag | **dewpoint_500hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 500 hPa Accessed in code, as dewpoint_500hPa from the diag | **dewpoint_50hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 50 hPa Accessed in code, as dewpoint_50hPa from the diag | **dewpoint_700hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 700 hPa Accessed in code, as dewpoint_700hPa from the diag | **dewpoint_850hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 850 hPa Accessed in code, as dewpoint_850hPa from the diag | **dewpoint_925hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature vertically interpolated to 925 hPa Accessed in code, as dewpoint_925hPa from the diag | **dewpoint_surface** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Dewpoint temperature at midpoint of lowest model layer Accessed in code, as dewpoint_surface from the diag | **divergence** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Horizontal velocity divergence at cell center Accessed in code, as divergence from the diag | **dqke** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,TKE change Allocated by, bl_mynn_in Accessed in code, as dqke from the diag_physics | **dss** (real) (nVertLevels, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,w-damping coefficient Accessed in code, as dss from the mesh | **dtaux3d** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,gravity wave drag over orography u-stress Accessed in code, as dtaux3d from the diag_physics | **dtauy3d** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,gravity wave drag over orography v-stress Accessed in code, as dtauy3d from the diag_physics | **dtheta_dt_mix** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,Potential temperature heating rate from explicit numerical mixing Accessed in code, as dtheta_dt_mix from the diag | **dtheta_dt_mp** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,Potential temperature heating rate from microphysics Accessed in code, as dtheta_dt_mp from the diag | **dusfcg** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa m s\ :sup:`-1` Description,vertically-integrated gravity wave drag over orography u-stress Accessed in code, as dusfcg from the diag_physics | **dvEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Spherical distance between vertex endpoints of an edge Accessed in code, as dvEdge from the mesh | **dvsfcg** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa m s\ :sup:`-1` Description,vertically-integrated gravity wave drag over orography v-stress Accessed in code, as dvsfcg from the diag_physics | **dzs** (real) (nSoilLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,soil layer thickness Accessed in code, as dzs from the sfc_input | **dzu** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,d(zeta) at w levels Accessed in code, as dzu from the mesh | **east** (real) (R3, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cartesian components of the local unit vector pointing east Accessed in code, as east from the mesh | **edgeNormalVectors** (real) (R3, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cartesian components of the vector normal to an edge and tangential to the surface of the sphere Accessed in code, as edgeNormalVectors from the mesh | **edgesOnCell** (integer) (maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of edges forming the boundary of a cell Accessed in code, as edgesOnCell from the mesh | **edgesOnCell_sign** (real) (maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Sign for edges surrounding a cell: positive for positive outward normal velocity Accessed in code, as edgesOnCell_sign from the mesh | **edgesOnEdge** (integer) (maxEdges2, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of edges involved in reconstruction of tangential velocity for an edge Accessed in code, as edgesOnEdge from the mesh | **edgesOnVertex** (integer) (vertexDegree, nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of the edges that meet at a vertex Accessed in code, as edgesOnVertex from the mesh | **edgesOnVertex_sign** (real) (vertexDegree, nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Sign for edges incident with a vertex: positive for positive inward tengential velocity Accessed in code, as edgesOnVertex_sign from the mesh | **edmf_a** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,EDMF relative updraft area of moist updrafts in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as edmf_a from the diag_physics | **edmf_ent** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`-1` Description,EDMF entrainment rate in moist updrafts in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as edmf_ent from the diag_physics | **edmf_qc** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,EDMF liquid water mixing ratio in moist updrafts in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as edmf_qc from the diag_physics | **edmf_qt** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,EDMF total water mixing ratio in moist updrafts in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as edmf_qt from the diag_physics | **edmf_thl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,EDMF liquid-ice water potential temperature in moist updrafts in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as edmf_thl from the diag_physics | **edmf_w** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,EDMF vertical velocity of moist updrafts in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as edmf_w from the diag_physics | **el_pbl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,mixing length from PBL scheme Allocated by, bl_mynn_in Accessed in code, as el_pbl from the diag_physics | **emstot** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Total emissivity Accessed in code, as emstot from the diag_physics | **ertel_pv** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,PVU Description,Ertel's potential vorticity Accessed in code, as ertel_pv from the diag | **euler_tend_theta** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` s\ :sup:`-1` Description,tendency of coupled potential temperature rho*theta_m/zz from dynamics and physics that does not change over a Runge-Kutta timestep (it excludes the flux divergence) Accessed in code, as theta_euler from the tend | **euler_tend_u** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Tendency of u from dynamics Accessed in code, as u_euler from the tend | **euler_tend_w** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Tendency of w from dynamics Accessed in code, as w_euler from the tend | **evapprod** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,rain evaporation rate Allocated by, mp_thompson_in Accessed in code, as evapprod from the diag_physics | **exch_h** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,exchange coefficient Allocated by, bl_ysu_in Accessed in code, as exch_h from the diag_physics | **exner** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Exner function Accessed in code, as exner from the diag | **exner_base** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Base-state Exner function Accessed in code, as exner_base from the diag | **fEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coriolis parameter at an edge Accessed in code, as fEdge from the mesh | **fh** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,integrated stability function for heat Allocated by, bl_ysu_in Accessed in code, as fh from the diag_physics | **flhc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` K\ :sup:`-1` Description,exchange coefficient for heat Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as flhc from the diag_physics | **flqc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,exchange coefficient for moisture Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as flqc from the diag_physics | **fm** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,integrated stability function for moisture Allocated by, bl_ysu_in Accessed in code, as fm from the diag_physics | **fVertex** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coriolis parameter at a vertex Accessed in code, as fVertex from the mesh | **fzm** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Weight for linear interpolation to w(k) point for u(k) level variable Accessed in code, as fzm from the mesh | **fzp** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Weight for linear interpolation to w(k) point for u(k-1`) level variable Accessed in code, as fzp from the mesh | **gamma_tri** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,implicit tridiagonal solve coefficients Accessed in code, as gamma_tri from the diag | **glw** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky downward surface longwave radiation Accessed in code, as glw from the diag_physics | **gradPVn** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,??? Description,Gradient in the normal direction of PV at edge locations Accessed in code, as gradPVn from the diag | **gradPVt** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,??? Description,Gradient in the tangential direction of PV at edge locations Accessed in code, as gradPVt from the diag | **graupelnc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,accumulated grid-scale precipitation of graupel Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as graupelnc from the diag_physics | **graupelncv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,time-step grid-scale precipitation of graupel Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as graupelncv from the diag_physics | **grdflx** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,ground heat flux Accessed in code, as grdflx from the diag_physics | **greenfrac** (real) (nMonths, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,monthly-mean climatological greeness fraction Accessed in code, as greenfrac from the sfc_input | **gsw** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,net surface shortwave radiation flux Accessed in code, as gsw from the diag_physics | **gz1oz0** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,log(z/z0) where z0 is roughness length Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as gz1oz0 from the diag_physics | **h_divergence** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,??? Description,??? Accessed in code, as h_divergence from the diag | **h_oml** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,ocean mixed layer depth Accessed in code, as h_oml from the diag_physics | **h_oml_initial** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,ocean mixed layer depth at initial time Accessed in code, as h_oml_initial from the diag_physics | **height_100hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 100 hPa Accessed in code, as height_100hPa from the diag | **height_200hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 200 hPa Accessed in code, as height_200hPa from the diag | **height_250hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 250 hPa Accessed in code, as height_250hPa from the diag | **height_500hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 500 hPa Accessed in code, as height_500hPa from the diag | **height_50hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 50 hPa Accessed in code, as height_50hPa from the diag | **height_700hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 700 hPa Accessed in code, as height_700hPa from the diag | **height_850hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 850 hPa Accessed in code, as height_850hPa from the diag | **height_925hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Geometric height interpolated to 925 hPa Accessed in code, as height_925hPa from the diag | **hfx** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,upward heat flux at the surface Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as hfx from the diag_physics | **hpbl** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Planetary Boundary Layer (PBL) height Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as hpbl from the diag_physics | **hu_oml** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,ocean mixed layer integrated u (zonal velocity) Accessed in code, as hu_oml from the diag_physics | **hv_oml** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,ocean mixed layer integrated v (meridional velocity) Accessed in code, as hv_oml from the diag_physics | **i_aclwdnb** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky downward surface longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwdnb from the diag_physics | **i_aclwdnbc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky downward surface longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwdnbc from the diag_physics | **i_aclwdnt** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky downward top-of-atmosphere longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwdnt from the diag_physics | **i_aclwdntc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky downward top-of-atmosphere longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwdntc from the diag_physics | **i_aclwupb** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky upward surface longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwupb from the diag_physics | **i_aclwupbc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky upward surface longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwupbc from the diag_physics | **i_aclwupt** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky upward top-of-atmosphere longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwupt from the diag_physics | **i_aclwuptc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky upward top-of-atmosphere longwave radiation greater than config_bucket_radt Accessed in code, as i_aclwuptc from the diag_physics | **i_acswdnb** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky downward surface shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswdnb from the diag_physics | **i_acswdnbc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky downward surface shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswdnbc from the diag_physics | **i_acswdnt** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky downward top-of-atmosphere shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswdnt from the diag_physics | **i_acswdntc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky downward top-of-atmosphere shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswdntc from the diag_physics | **i_acswupb** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky upward surface shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswupb from the diag_physics | **i_acswupbc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky upward surface shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswupbc from the diag_physics | **i_acswupt** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated all-sky upward top-of-atmosphere shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswupt from the diag_physics | **i_acswuptc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated clear-sky upward top-of-atmosphere shortwave radiation greater than config_bucket_radt Accessed in code, as i_acswuptc from the diag_physics | **i_rainc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated convective precipitation greater than config_bucket_rainc Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as i_rainc from the diag_physics | **i_rainnc** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,incidence of accumulated grid-scale precipitation greater than config_bucket_rainnc Allocated by, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in Accessed in code, as i_rainnc from the diag_physics | **iLev_DT** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Lowest vertical level at or above dynamic tropopause (.lt.1 if 2 PVU below column; .gt.nLevels if 2PVU above column) Accessed in code, as iLev_DT from the diag | **indexToCellID** (integer) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Mapping from local array index to global cell ID Accessed in code, as indexToCellID from the mesh | **indexToEdgeID** (integer) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Mapping from local array index to global edge ID Accessed in code, as indexToEdgeID from the mesh | **indexToVertexID** (integer) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Mapping from local array index to global vertex ID Accessed in code, as indexToVertexID from the mesh | **initial_time** (text) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,YYYY-MM-DD_hh:mm:ss Description,Model initialization time Accessed in code, as initial_time from the state | **inTropo** (integer) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,0/1 Description,1 if within troposphere based on EPV flood fill Accessed in code, as inTropo from the diag | **invAreaCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`-2` Description,Inverse of Voronoi cell area Accessed in code, as invAreaCell from the mesh | **invAreaTriangle** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`-2` Description,Inverse area of a Delaunay triangle Accessed in code, as invAreaTriangle from the mesh | **invDcEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`-1` Description,Inverse distance between cells separated by an edge Accessed in code, as invDcEdge from the mesh | **invDvEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`-1` Description,Inverse distance between vertex endpoints of an edge Accessed in code, as invDvEdge from the mesh | **isice_lu** (integer) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Index category for snow/ice Accessed in code, as isice from the sfc_input | **isltyp** (integer) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,dominant soil category Accessed in code, as isltyp from the sfc_input | **iswater_lu** (integer) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Index category for water Accessed in code, as iswater from the sfc_input | **ivgtyp** (integer) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,dominant vegetation category Accessed in code, as ivgtyp from the sfc_input | **k22_shallow** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,index of convection at k22 level in Grell-Freitas convection scheme Allocated by, cu_grell_freitas_in Accessed in code, as k22_shallow from the diag_physics | **kbcon_shallow** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,index of lowest level of shallow convection in Grell-Freitas convection scheme Allocated by, cu_grell_freitas_in Accessed in code, as kbcon_shallow from the diag_physics | **kdiff** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,Smagorinsky horizontal eddy viscosity Accessed in code, as kdiff from the diag | **ke** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,Kinetic energy at a cell center Accessed in code, as ke from the diag | **kiteAreasOnVertex** (real) (vertexDegree, nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` Description,Intersection areas between primal (Voronoi) and dual (triangular) mesh cells Accessed in code, as kiteAreasOnVertex from the mesh | **kiteForCell** (integer) (maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Index of kite in kiteAreasOnVertex that lies within a cell for each of verticesOnCell Accessed in code, as kiteForCell from the mesh | **kpbl** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,index level of PBL top Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as kpbl from the diag_physics | **ktop_deep** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,index of highest level of deep convection in Grell-Freitas convection scheme Allocated by, cu_grell_freitas_in Accessed in code, as ktop_deep from the diag_physics | **ktop_shallow** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,index of highest level of shallow convection in Grell-Freitas convection scheme Allocated by, cu_grell_freitas_in Accessed in code, as ktop_shallow from the diag_physics | **kzh** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,vertical diffusion coefficient of potential temperature Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as kzh from the diag_physics | **kzm** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,vertical diffusion coefficient of mommentum Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as kzm from the diag_physics | **kzq** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-1` Description,vertical diffusion coefficient of water vapor and cloud condensates Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as kzq from the diag_physics | **lai** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`-2` m\ :sup:`-2` Description,leaf area index Accessed in code, as lai from the diag_physics | **landmask** (integer) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,land-ocean mask (1=land ; 0=ocean) Accessed in code, as landmask from the sfc_input | **latCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,rad Description,Latitude of cells Accessed in code, as latCell from the mesh | **latEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,rad Description,Latitude of edges Accessed in code, as latEdge from the mesh | **latVertex** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,rad Description,Latitude of vertices Accessed in code, as latVertex from the mesh | **lbc_rho** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` s\ :sup:`-1` Description,Lateral boundary tendency of rho Accessed in code, as lbc_rho from the lbc | **lbc_rho_edge** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` s\ :sup:`-1` Description,Lateral boundary tendency of rho_zz averaged from cell centers to cell faces (edges) Accessed in code, as lbc_rho_edge from the lbc | **lbc_rho_zz** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` s\ :sup:`-1` Description,Lateral boundary tendency of rho_zz Accessed in code, as lbc_rho_zz from the lbc | **lbc_rtheta_m** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` s\ :sup:`-2` Description,Lateral boundary tendency of rho_zz-coupled theta_m Accessed in code, as lbc_rtheta_m from the lbc | **lbc_ru** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-2` Description,Lateral boundary tendency of rho_zz-coupled u Accessed in code, as lbc_ru from the lbc | **lbc_scalars** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,lbc_scalars is a variable array used in code which is made up of the constituent fields listed below. Accessed in code, lbc_scalars from the lbc pool | **lbc_qv** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of water vapor mixing ratio Units,kg kg\ :sup:`-1` s\ :sup:`-1` Array Group, moist | **lbc_qc** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of cloud water mixing ratio Units,kg kg\ :sup:`-1` s\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, cu_ntiedtke_in\, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **lbc_qr** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of rain water mixing ratio Units,kg kg\ :sup:`-1` s\ :sup:`-1` Array Group, moist Allocated by, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **lbc_qi** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of ice mixing ratio Units,kg kg\ :sup:`-1` s\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, cu_ntiedtke_in\, mp_thompson_in\, mp_wsm6_in | **lbc_qs** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of snow mixing ratio Units,kg kg\ :sup:`-1` s\ :sup:`-1` Array Group, moist Allocated by, mp_thompson_in\, mp_wsm6_in | **lbc_qg** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of graupel mixing ratio Units,kg kg\ :sup:`-1` s\ :sup:`-1` Array Group, moist Allocated by, mp_thompson_in\, mp_wsm6_in | **lbc_nr** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of rain number concentration Units,m\ :sup:`-3` s\ :sup:`-1` Array Group, number Allocated by, mp_thompson_in | **lbc_ni** -- constituent field of var_array lbc_scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Lateral boundary tendency of ice number concentration Units,m\ :sup:`-3` s\ :sup:`-1` Array Group, number Allocated by, bl_mynn_in\, mp_thompson_in | **lbc_theta** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-2` Description,Lateral boundary tendency of theta Accessed in code, as lbc_theta from the lbc | **lbc_u** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Lateral boundary tendency of u Accessed in code, as lbc_u from the lbc | **lbc_w** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Lateral boundary tendency of w Accessed in code, as lbc_w from the lbc | **lcl** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Lifted condensation level Accessed in code, as lcl from the diag | **lfc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Level of free convection Accessed in code, as lfc from the diag | **lh** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,latent heat flux at the surface Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as lh from the diag_physics | **localVerticalUnitVectors** (real) (R3, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cartesian components of the vector pointing in the local vertical direction for a cell Accessed in code, as localVerticalUnitVectors from the mesh | **lonCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,rad Description,Longitude of cells Accessed in code, as lonCell from the mesh | **lonEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,rad Description,Longitude of edges Accessed in code, as lonEdge from the mesh | **lonVertex** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,rad Description,Longitude of vertices Accessed in code, as lonVertex from the mesh | **lwcf** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,top-of-atmosphere cloud longwave radiative forcing Accessed in code, as lwcf from the diag_physics | **lwdnb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky downward surface longwave radiation flux Accessed in code, as lwdnb from the diag_physics | **lwdnbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky downward surface longwave radiation flux Accessed in code, as lwdnbc from the diag_physics | **lwdnt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky downward top-of-the-atmosphere longwave radiation flux Accessed in code, as lwdnt from the diag_physics | **lwdntc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky downward top-of-the-atmosphere longwave radiation flux Accessed in code, as lwdntc from the diag_physics | **lwupb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky upward surface longwave radiation flux Accessed in code, as lwupb from the diag_physics | **lwupbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky upward surface longwave radiation flux Accessed in code, as lwupbc from the diag_physics | **lwupt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky upward top-of-the-atmosphere longwave radiation flux Accessed in code, as lwupt from the diag_physics | **lwuptc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky upward top-of-the-atmosphere longwave radiation flux Accessed in code, as lwuptc from the diag_physics | **m_hybi** (real) (nAerLevels, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Matched hybi (needs to be re-checked) Accessed in code, as m_hybi from the diag_physics | **m_ps** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Surface pressure from match on MPAS grid Accessed in code, as m_ps from the diag_physics | **mavail** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,surface moisture availability (between 0 and 1) Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as mavail from the diag_physics | **meanT_500_300** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Mean temperature in the 300 hPa - 500 hPa layer Accessed in code, as meanT_500_300 from the diag | **meshDensity** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Mesh density function (used when generating the mesh) evaluated at a cell Accessed in code, as meshDensity from the mesh | **meshScalingDel2** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Scaling coefficient for $\nabla^2$ eddy viscosity Accessed in code, as meshScalingDel2 from the mesh | **meshScalingDel4** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Scaling coefficient for $\nabla^4$ eddy hyper-viscosity Accessed in code, as meshScalingDel4 from the mesh | **meshScalingRegionalCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cell-centered Scaling coefficient for relaxation zone Accessed in code, as meshScalingRegionalCell from the mesh | **meshScalingRegionalEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Edge-centered Scaling coefficient for relaxation zone Accessed in code, as meshScalingRegionalEdge from the mesh | **mminlu** (text) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,land use classification Accessed in code, as mminlu from the sfc_input | **mol** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,T* in similarity theory Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as mol from the diag_physics | **mslp** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Mean sea-level pressure Accessed in code, as mslp from the diag | **mu_c** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,gamma shape parameter Allocated by, mp_thompson_in Accessed in code, as mu_c from the diag_physics | **nAdvCellsForEdge** (integer) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Number of cells used to reconstruct a cell-based field at an edge Accessed in code, as nAdvCellsForEdge from the mesh | **nca** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s Description,relaxation time for KF parameterization of convection Allocated by, cu_kain_fritsch_in Accessed in code, as nca from the diag_physics | **ndays_accum** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,number of accumulated days in a year Accessed in code, as ndays_accum from the diag_physics | **nearestRelaxationCell** (integer) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units," " Description,For cells in the specified zone\, gives the index of the nearest cell in the relaxation zone Accessed in code, as nearestRelaxationCell from the mesh | **nEdgesOnCell** (integer) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Number of edges forming the boundary of a cell Accessed in code, as nEdgesOnCell from the mesh | **nEdgesOnEdge** (integer) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Number of edges involved in reconstruction of tangential velocity for an edge Accessed in code, as nEdgesOnEdge from the mesh | **nlrad** (integer) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,number of layers added above the model-top in the RRTMG lw radiation code Accessed in code, as nlrad from the diag_physics | **noahres** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,residual of the Noah surface energy budget Accessed in code, as noahres from the diag_physics | **nominalMinDc** (real) () .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Nominal minimum dcEdge value where meshDensity == 1.0 Accessed in code, as nominalMinDc from the mesh | **north** (real) (R3, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Cartesian components of the unit vector pointing north Accessed in code, as north from the mesh | **nsteps_accum** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,number of accumulated time-steps in a day Accessed in code, as nsteps_accum from the diag_physics | **nt_c** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,nb kg\ :sup:`-1` Description,one-moment constant cloud water droplet concentration Allocated by, mp_thompson_in Accessed in code, as nt_c from the diag_physics | **o3clim** (real) (nOznLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mol mol\ :sup:`-1` Description,climatological ozone on prescribed pressure levels at current time Accessed in code, as o3clim from the diag_physics | **o3vmr** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mol mol\ :sup:`-1` Description,ozone volume mixing ratio Accessed in code, as o3vmr from the diag_physics | **oa1** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,asymmetry of subgrid-scale orography for westerly flow Accessed in code, as oa1 from the sfc_input | **oa2** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,asymmetry of subgrid-scale orography for southerly flow Accessed in code, as oa2 from the sfc_input | **oa3** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,asymmetry of subgrid-scale orography for south-westerly flow Accessed in code, as oa3 from the sfc_input | **oa4** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,asymmetry of subgrid-scale orography for north-westerly flow Accessed in code, as oa4 from the sfc_input | **ol1** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,effective orographic length for westerly flow Accessed in code, as ol1 from the sfc_input | **ol2** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,effective orographic length for southerly flow Accessed in code, as ol2 from the sfc_input | **ol3** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitles Description,effective orographic length for south-westerly flow Accessed in code, as ol3 from the sfc_input | **ol4** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,effective orographic length for north-westerly flow Accessed in code, as ol4 from the sfc_input | **olrtoa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky top-of-atmosphere outgoing longwave radiation flux Accessed in code, as olrtoa from the diag_physics | **ozmixm** (real) (nMonths, nOznLevels, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mol mol\ :sup:`-1` Description,monthly-mean climatological ozone defined at fixed pressure levels Accessed in code, as ozmixm from the atm_input | **pin** (real) (nOznLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,fixed pressure levels at which climatological ozone is defined Accessed in code, as pin from the atm_input | **plrad** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,pressure at model-top Accessed in code, as plrad from the diag_physics | **potevp** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,accumulated potential evaporation Accessed in code, as potevp from the diag_physics | **precipw** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` Description,precipitable water Accessed in code, as precipw from the diag_physics | **pressure** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Pressure Accessed in code, as pressure from the diag | **pressure_base** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Base state pressure Accessed in code, as pressure_base from the diag | **pressure_p** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Perturbation pressure Accessed in code, as pressure_p from the diag | **psih** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,similarity stability function for heat Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as psih from the diag_physics | **psim** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,similarity stability function for momentum Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as psim from the diag_physics | **pv_cell** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,absolute vertical vorticity averaged to the cell center from the vertices Accessed in code, as pv_cell from the diag | **pv_edge** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,absolute vertical vorticity averaged to the cell edge from the vertices Accessed in code, as pv_edge from the diag | **pv_vertex** (real) (nVertLevels, nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,absolute vertical vorticity at a vertex Accessed in code, as pv_vertex from the diag | **q2** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,2-meter specific humidity Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as q2 from the diag_physics | **qbuoy** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,TKE production - buoyancy Allocated by, bl_mynn_in Accessed in code, as qbuoy from the diag_physics | **qc_bl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description, Allocated by, bl_mynn_in Accessed in code, as qc_bl from the diag_physics | **qc_cu** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,in-cloud cloud water mixing ratio in Grell-Freitas cloud model Allocated by, cu_grell_freitas_in Accessed in code, as qc_cu from the diag_physics | **qcg** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,cloud water mixing ratio at the ground surface Allocated by, bl_mynn_in Accessed in code, as qcg from the diag_physics | **qdiss** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,TKE dissipation Allocated by, bl_mynn_in Accessed in code, as qdiss from the diag_physics | **qfx** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,upward moisture flux at the surface Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as qfx from the diag_physics | **qgh** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,lowest level saturation mixing ratio Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as qgh from the diag_physics | **qi_bl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description, Allocated by, bl_mynn_in Accessed in code, as qi_bl from the diag_physics | **qi_cu** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,in-cloud cloud ice mixing ratio in Grell-Freitas cloud model Allocated by, cu_grell_freitas_in Accessed in code, as qi_cu from the diag_physics | **qke** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,twice turbulent kinetic energy Allocated by, bl_mynn_in Accessed in code, as qke from the diag_physics | **qke_adv** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,twice turbulent kinetic energy Allocated by, bl_mynn_in Accessed in code, as qke_adv from the diag_physics | **qsfc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,specific humidity at lower boundary Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as qsfc from the diag_physics | **qshear** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,TKE production - shear Allocated by, bl_mynn_in Accessed in code, as qshear from the diag_physics | **qsq** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1`\ :sup:`2` Description,liquid water variance Allocated by, bl_mynn_in Accessed in code, as qsq from the diag_physics | **qv_init** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,qv reference profile Accessed in code, as qv_init from the mesh | **qwt** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,TKE vertical distribution Allocated by, bl_mynn_in Accessed in code, as qwt from the diag_physics | **rainc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,accumulated convective precipitation Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as rainc from the diag_physics | **raincv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,time-step convective precipitation Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as raincv from the diag_physics | **rainnc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,accumulated total grid-scale precipitation Allocated by, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in Accessed in code, as rainnc from the diag_physics | **rainncv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,time-step total grid-scale precipitation Allocated by, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in Accessed in code, as rainncv from the diag_physics | **rainprod** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,rain production rate Allocated by, mp_thompson_in Accessed in code, as rainprod from the diag_physics | **rdzu** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Reciprocal dzu Accessed in code, as rdzu from the mesh | **rdzw** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Reciprocal dzw Accessed in code, as rdzw from the mesh | **re_cloud** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,effective radius of cloud water droplets Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as re_cloud from the diag_physics | **re_ice** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,effective radius of cloud ice crystals Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as re_ice from the diag_physics | **re_snow** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,effective radius of snow crystals Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as re_snow from the diag_physics | **refl10cm_1km** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,dBZ Description,diagnosed 10 cm radar reflectivity at 1 km AGL Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as refl10cm_1km from the diag_physics | **refl10cm_1km_max** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,dBZ Description,maximum diagnosed 10 cm radar reflectivity at 1 km AGL since last output time Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as refl10cm_1km_max from the diag_physics | **refl10cm_max** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,dBZ Description,10 cm maximum radar reflectivity Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as refl10cm_max from the diag_physics | **regime** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,flag indicating the PBL regime (stable\,unstable\,...) Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as regime from the diag_physics | **relhum** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity Accessed in code, as relhum from the diag | **relhum_100hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 100 hPa Accessed in code, as relhum_100hPa from the diag | **relhum_200hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 200 hPa Accessed in code, as relhum_200hPa from the diag | **relhum_250hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 250 hPa Accessed in code, as relhum_250hPa from the diag | **relhum_500hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 500 hPa Accessed in code, as relhum_500hPa from the diag | **relhum_50hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 50 hPa Accessed in code, as relhum_50hPa from the diag | **relhum_700hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 700 hPa Accessed in code, as relhum_700hPa from the diag | **relhum_850hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 850 hPa Accessed in code, as relhum_850hPa from the diag | **relhum_925hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,percent Description,Relative humidity vertically interpolated to 925 hPa Accessed in code, as relhum_925hPa from the diag | **rho** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,Dry air density Accessed in code, as rho from the diag | **rho_amb** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,Dry air density increment Accessed in code, as rho from the tend_iau | **rho_base** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,Base state dry air density Accessed in code, as rho_base from the diag | **rho_edge** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,rho_zz averaged from cell centers to the cell edge Accessed in code, as rho_edge from the diag | **rho_p** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,rho/zz perturbation from the reference state value\, advanced over acoustic steps Accessed in code, as rho_p from the diag | **rho_p_save** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,predicted value rho_p\, saved before acoustic steps Accessed in code, as rho_p_save from the diag | **rho_pp** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,rho/zz perturbation from rho_pp\, advanced over acoustic steps Accessed in code, as rho_pp from the diag | **rho_zz** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,Dry air density divided by d(zeta)/dz Accessed in code, as rho_zz from the state | **rho_zz_old_split** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` Description,rho/zz Accessed in code, as rho_zz_old_split from the diag | **rmol** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,1./L Monin Obukhov length Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as rmol from the diag_physics | **rniblten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,nb kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of cloud ice number concentration due to pbl processes Allocated by, bl_mynn_in Accessed in code, as rniblten from the tend_physics | **rqcblten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of cloud water mixing ratio due to pbl processes Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as rqcblten from the tend_physics | **rqccuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of cloud water mixing ratio due to cumulus convection Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as rqccuten from the tend_physics | **rqiblten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of cloud ice mixing ratio due to pbl processes Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as rqiblten from the tend_physics | **rqicuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of cloud ice mixing ratio due to cumulus convection Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as rqicuten from the tend_physics | **rqrcuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of rain mixing ratio due to cumulus convection Allocated by, cu_kain_fritsch_in Accessed in code, as rqrcuten from the tend_physics | **rqsblten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of snow mixing ratio due to pbl processes Allocated by, bl_mynn_in Accessed in code, as rqsblten from the tend_physics | **rqscuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of snow mixing ratio due to cumulus convection Allocated by, cu_kain_fritsch_in Accessed in code, as rqscuten from the tend_physics | **rqvblten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of water vapor mixing ratio due to pbl processes Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as rqvblten from the tend_physics | **rqvcuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of water vapor mixing ratio due to cumulus convection Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as rqvcuten from the tend_physics | **rqvdynten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,tendency of water vapor due to horizontal and vertical advections Allocated by, cu_grell_freitas_in\, cu_ntiedtke_in Accessed in code, as rqvdynten from the tend_physics | **rre_cloud** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,microns Description,effective radius of cloud water droplets calculated in RRTMG radiation Accessed in code, as rre_cloud from the diag_physics | **rre_ice** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,microns Description,effective radius of cloud ice crystals calculated in RRTMG radiation Accessed in code, as rre_ice from the diag_physics | **rre_snow** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,microns Description,effective radius of snow crystals calculated in RRTMG radiation Accessed in code, as rre_snow from the diag_physics | **rt_diabatic_tend** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,Tendency of modified potential temperature due to cloud microphysics Accessed in code, as rt_diabatic_tend from the tend | **rthblten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,tendency of potential temperature due to pbl processes Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as rthblten from the tend_physics | **rthcuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,tendency of potential temperature due to cumulus convection Allocated by, cu_grell_freitas_in\, cu_kain_fritsch_in\, cu_ntiedtke_in Accessed in code, as rthcuten from the tend_physics | **rthdynten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,tendency of temperature due to horizontal and vertical advections Accessed in code, as rthdynten from the tend_physics | **rtheta_base** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` Description,reference state rho*theta/zz Accessed in code, as rtheta_base from the diag | **rtheta_p** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` Description,rho*theta_m/zz perturbation from the reference state value Accessed in code, as rtheta_p from the diag | **rtheta_p_save** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` Description,predicted value rtheta_p\, saved before acoustic steps Accessed in code, as rtheta_p_save from the diag | **rtheta_pp** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` Description,rho*theta_m/zz perturbation from rtheta_p Accessed in code, as rtheta_pp from the diag | **rtheta_pp_old** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` Description,old time level values of rho*theta_m/zz perturbation from rtheta_p\, used in 3D divergence damping Accessed in code, as rtheta_pp_old from the diag | **rthratenlw** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,tendency of potential temperature due to long wave radiation Accessed in code, as rthratenlw from the tend_physics | **rthratensw** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,tendency of potential temperature due to short wave radiation Accessed in code, as rthratensw from the tend_physics | **ru** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,horizontal momentum at cell edge (rho*u/zz) Accessed in code, as ru from the diag | **ru_p** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,acoustic perturbation horizontal momentum at cell edge (rho*u/zz) Accessed in code, as ru_p from the diag | **ru_save** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,predicted value of horizontal momentum\, saved before acoustic steps Accessed in code, as ru_save from the diag | **ruAvg** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,time-averaged rho*u/zz used in scalar transport Accessed in code, as ruAvg from the diag | **ruAvg_split** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,time-averaged rho*u/zz used in scalar transport Accessed in code, as ruAvg_split from the diag | **rubldiff** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,change in PBL zonal wind tendency due to gravity wave drag over orography Accessed in code, as rubldiff from the diag_physics | **rublten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` s\ :sup:`-1` Description,tendency of zonal wind due to pbl processes Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as rublten from the tend_physics | **rublten_Edge** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units, Description, Accessed in code, as rublten_Edge from the tend_physics | **rucuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` s\ :sup:`-1` Description,tendency of zonal wind due to cumulus convection Allocated by, cu_grell_freitas_in\, cu_ntiedtke_in Accessed in code, as rucuten from the tend_physics | **rucuten_Edge** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units, Description, Accessed in code, as rucuten_Edge from the tend_physics | **rv** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,??? Description,??? Accessed in code, as rv from the diag | **rvbldiff** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,change in PBL meridional wind tendency due to gravity wave drag over orography Accessed in code, as rvbldiff from the diag_physics | **rvblten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` s\ :sup:`-1` Description,tendency of meridional wind due to pbl processes Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as rvblten from the tend_physics | **rvcuten** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` s\ :sup:`-1` Description,tendency of meridional wind due to cumulus convection Allocated by, cu_grell_freitas_in\, cu_ntiedtke_in Accessed in code, as rvcuten from the tend_physics | **rw** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,rho*omega/zz carried at w points Accessed in code, as rw from the diag | **rw_p** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,acoustic perturbation rho*omega/zz carried at w points Accessed in code, as rw_p from the diag | **rw_save** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,predicted value of rho*omega/zz\, saved before acoustic steps Accessed in code, as rw_save from the diag | **scalars** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,scalars is a variable array used in code which is made up of the constituent fields listed below. Accessed in code, scalars from the state pool | **qv** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Water vapor mixing ratio Units,kg kg\ :sup:`-1` Array Group, moist | **qc** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Cloud water mixing ratio Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, bl_ysu_in\, cu_ntiedtke_in\, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **qr** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Rain water mixing ratio Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **qi** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Ice mixing ratio Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, bl_ysu_in\, cu_ntiedtke_in\, mp_thompson_in\, mp_wsm6_in | **qs** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Snow mixing ratio Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, mp_thompson_in\, mp_wsm6_in | **qg** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Graupel mixing ratio Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, mp_thompson_in\, mp_wsm6_in | **ni** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Cloud ice number concentration Units,nb kg\ :sup:`-1` Array Group, number Allocated by, bl_mynn_in\, mp_thompson_in | **nr** -- constituent field of var_array scalars .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Rain number concentration Units,nb kg\ :sup:`-1` Array Group, number Allocated by, mp_thompson_in | **scalars_amb** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,scalars_amb is a variable array used in code which is made up of the constituent fields listed below. Accessed in code, scalars from the tend_iau pool | **qv_amb** -- constituent field of var_array scalars_amb .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Water vapor mixing ratio increment Units,kg kg\ :sup:`-1` Array Group, moist | **qc_amb** -- constituent field of var_array scalars_amb .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Cloud water mixing ratio increment Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, bl_ysu_in\, cu_ntiedtke_in\, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **qr_amb** -- constituent field of var_array scalars_amb .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Rain water mixing ratio increment Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **qi_amb** -- constituent field of var_array scalars_amb .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Ice mixing ratio increment Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, bl_ysu_in\, cu_ntiedtke_in\, mp_thompson_in\, mp_wsm6_in | **qs_amb** -- constituent field of var_array scalars_amb .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Snow mixing ratio increment Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, mp_thompson_in\, mp_wsm6_in | **qg_amb** -- constituent field of var_array scalars_amb .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Graupel mixing ratio increment Units,kg kg\ :sup:`-1` Array Group, moist Allocated by, mp_thompson_in\, mp_wsm6_in | **scalars_tend** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,scalars_tend is a variable array used in code which is made up of the constituent fields listed below. Accessed in code, scalars_tend from the tend pool | **tend_qv** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of water vapor mass per unit volume divided by d(zeta)/dz Units,kg m\ :sup:`-3` s\ :sup:`-1` Array Group, moist | **tend_qc** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of cloud water mass per unit volume divided by d(zeta)/dz Units,kg m\ :sup:`-3` s\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, bl_ysu_in\, cu_ntiedtke_in\, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **tend_qr** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of rain water mass per unit volume divided by d(zeta)/dz Units,kg m\ :sup:`-3` s\ :sup:`-1` Array Group, moist Allocated by, mp_kessler_in\, mp_thompson_in\, mp_wsm6_in | **tend_qi** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of ice mass per unit volume divided by d(zeta)/dz Units,kg m\ :sup:`-3` s\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, bl_ysu_in\, cu_ntiedtke_in\, mp_thompson_in\, mp_wsm6_in | **tend_qs** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of snow mass per unit volume divided by d(zeta)/dz Units,kg m\ :sup:`-3` s\ :sup:`-1` Array Group, moist Allocated by, bl_mynn_in\, mp_thompson_in\, mp_wsm6_in | **tend_qg** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of graupel mass per unit volume divided by d(zeta)/dz Units,kg m\ :sup:`-3` s\ :sup:`-1` Array Group, moist Allocated by, mp_thompson_in\, mp_wsm6_in | **tend_ni** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of cloud ice number concentration multiplied by dry air density divided by d(zeta)/dz Units,nb m\ :sup:`-3` s\ :sup:`-1` Array Group, number Allocated by, bl_mynn_in\, mp_thompson_in | **tend_nr** -- constituent field of var_array scalars_tend .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Description,Tendency of rain number concentration multiplied by dry air density divided by d(zeta)/dz Units,nb m\ :sup:`-3` s\ :sup:`-1` Array Group, number Allocated by, mp_thompson_in | **scale** (real) (nVertLevels, TWO, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,Scaling coefficients for monotonic-limited horizontal fluxes Accessed in code, as scale from the halo_scratch | **seaice** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,sea-ice flag (0=no seaice; =1 otherwise) Accessed in code, as seaice from the sfc_input | **sfc_albbck** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,background surface albedo Accessed in code, as sfc_albbck from the sfc_input | **sfc_albedo** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,surface albedo Accessed in code, as sfc_albedo from the diag_physics | **sfc_emibck** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,background surface emissivity Accessed in code, as sfc_emibck from the diag_physics | **sfc_emiss** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,surface emissivity Accessed in code, as sfc_emiss from the diag_physics | **sfcrunoff** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,surface runoff Accessed in code, as sfcrunoff from the diag_physics | **sh2o** (real) (nSoilLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m3 m\ :sup:`-3` Description,soil equivalent liquid water Accessed in code, as sh2o from the sfc_input | **sh3d** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,stability function for heat Allocated by, bl_mynn_in Accessed in code, as sh3d from the diag_physics | **shdmax** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,maximum fractional coverage of annual green vegetation fraction Accessed in code, as shdmax from the sfc_input | **shdmin** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,minimum fractional coverage of annual green vegetation fraction Accessed in code, as shdmin from the sfc_input | **skintemp** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,ground or water surface temperature Accessed in code, as skintemp from the sfc_input | **sm3d** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,stability function for moisture Allocated by, bl_mynn_in Accessed in code, as sm3d from the diag_physics | **smcrel** (real) (nSoilLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m3 m\ :sup:`-3` Description,soil moisture threshold below which transpiration begins to stress Accessed in code, as smcrel from the sfc_input | **smois** (real) (nSoilLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m3 m\ :sup:`-3` Description,soil moisture Accessed in code, as smois from the sfc_input | **smstav** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,surface moisture availability Accessed in code, as smstav from the diag_physics | **smstot** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`3 m\ :sup:`-3` Description,total soil mositure Accessed in code, as smstot from the diag_physics | **snoalb** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,annual maximum snow albedo Accessed in code, as snoalb from the sfc_input | **snopcx** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,snow phase change heat flux Accessed in code, as snopcx from the diag_physics | **snotime** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,initial number of time-steps since last snow fall Accessed in code, as snotime from the diag_physics | **snow** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` Description,snow water equivalent Accessed in code, as snow from the sfc_input | **snowc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,flag for snow on ground (=0 no snow; =1\,otherwise) Accessed in code, as snowc from the sfc_input | **snowh** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,physical snow depth Accessed in code, as snowh from the sfc_input | **snownc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,accumulated grid-scale precipitation of snow Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as snownc from the diag_physics | **snowncv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,time-step grid-scale precipitation of snow Allocated by, mp_thompson_in\, mp_wsm6_in Accessed in code, as snowncv from the diag_physics | **spechum** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` Description,Specific humidity Allocated by, jedi_da Accessed in code, as spechum from the diag | **specZoneMaskCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,0/1 mask on cells\, defined as 1 for cells in the limited-area specified zone Accessed in code, as specZoneMaskCell from the mesh | **specZoneMaskEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,0/1 mask on edges\, defined as 1 for edges in the limited-area specified zone Accessed in code, as specZoneMaskEdge from the mesh | **specZoneMaskVertex** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,0/1 mask on vertices\, defined as 1 for vertices in the limited-area specified zone Accessed in code, as specZoneMaskVertex from the mesh | **sr** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,time-step ratio of frozen versus total grid-scale precipitation Accessed in code, as sr from the diag_physics | **srh_0_1km** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,Storm relative helicity\, 0-1` km AGL Accessed in code, as srh_0_1km from the diag | **srh_0_3km** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,Storm relative helicity\, 0-3` km AGL Accessed in code, as srh_0_3km from the diag | **sst** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,sea-surface temperature Accessed in code, as sst from the sfc_input | **sstsk** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,skin sea-surface temperature Accessed in code, as sstsk from the diag_physics | **sstsk_dtc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,skin sea-surface temperature cooling Accessed in code, as sstsk_dtc from the diag_physics | **sstsk_dtw** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,skin sea-surface temperature warming Accessed in code, as sstsk_dtw from the diag_physics | **sub_qv** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg kg\ :sup:`-1` s\ :sup:`-1` Description,EDMF subsidence of water vapor mixing ratio in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as sub_qv from the diag_physics | **sub_thl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K s\ :sup:`-1` Description,EDMF subsidence of liquid-ice potential temperature in the MYNN PBL scheme Allocated by, bl_mynn_in Accessed in code, as sub_thl from the diag_physics | **surface_pressure** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Diagnosed surface pressure Accessed in code, as surface_pressure from the diag | **swcf** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,top-of-atmosphere cloud shortwave radiative forcing Accessed in code, as swcf from the diag_physics | **swddif** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,shortwave surface downward diffuse irradiance Accessed in code, as swddif from the diag_physics | **swddir** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,shortwave surface downward direct irradiance Accessed in code, as swddir from the diag_physics | **swddni** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,shortwave surface downward direct normal irradiance Accessed in code, as swddni from the diag_physics | **swdnb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky downward surface shortwave radiation flux Accessed in code, as swdnb from the diag_physics | **swdnbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky downward surface shortwave radiation flux Accessed in code, as swdnbc from the diag_physics | **swdnflx** (real) (nVertLevelsP2, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,- Accessed in code, as swdnflx from the diag_physics | **swdnflxc** (real) (nVertLevelsP2, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,- Accessed in code, as swdnflxc from the diag_physics | **swdnt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky downward top-of-atmosphere shortwave radiation flux Accessed in code, as swdnt from the diag_physics | **swdntc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky downward top-of-atmosphere shortwave radiation flux Accessed in code, as swdntc from the diag_physics | **swupb** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky upward surface shortwave radiation flux Accessed in code, as swupb from the diag_physics | **swupbc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky upward surface shortwave radiation flux Accessed in code, as swupbc from the diag_physics | **swupflx** (real) (nVertLevelsP2, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,- Accessed in code, as swupflx from the diag_physics | **swupflxc** (real) (nVertLevelsP2, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,- Accessed in code, as swupflxc from the diag_physics | **swupt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,all-sky upward top-of-atmosphere shortwave radiation flux Accessed in code, as swupt from the diag_physics | **swuptc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,W m\ :sup:`-2` Description,clear-sky upward top-of-atmosphere shortwave radiation flux Accessed in code, as swuptc from the diag_physics | **t2m** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,2-meter temperature Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as t2m from the diag_physics | **t_init** (real) (nVertLevels, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,theta reference profile Accessed in code, as t_init from the mesh | **t_iso_levels** (real) (nIsoLevelsT) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Levels for vertical interpolation of temperature to isobaric surfaces Accessed in code, as t_iso_levels from the diag | **t_isobaric** (real) (nIsoLevelsT, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature interpolated to isobaric surfaces defined in t_iso_levels Accessed in code, as t_isobaric from the diag | **t_oml** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,ocean mixed layer temperature Accessed in code, as t_oml from the diag_physics | **t_oml_200m_initial** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,ocean mixed layer 200 m mean temperature at initial time Accessed in code, as t_oml_200m_initial from the diag_physics | **t_oml_initial** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,ocean mixed layer temperature at initial time Accessed in code, as t_oml_initial from the diag_physics | **tday_accum** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,accumulated daily surface temperature for current day Accessed in code, as tday_accum from the diag_physics | **temperature** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,temperature Allocated by, jedi_da Accessed in code, as temperature from the diag | **temperature_100hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 100 hPa Accessed in code, as temperature_100hPa from the diag | **temperature_200hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 200 hPa Accessed in code, as temperature_200hPa from the diag | **temperature_250hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 250 hPa Accessed in code, as temperature_250hPa from the diag | **temperature_500hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 500 hPa Accessed in code, as temperature_500hPa from the diag | **temperature_50hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 50 hPa Accessed in code, as temperature_50hPa from the diag | **temperature_700hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 700 hPa Accessed in code, as temperature_700hPa from the diag | **temperature_850hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 850 hPa Accessed in code, as temperature_850hPa from the diag | **temperature_925hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature vertically interpolated to 925 hPa Accessed in code, as temperature_925hPa from the diag | **temperature_surface** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Temperature at midpoint of lowest model layer Accessed in code, as temperature_surface from the diag | **tend_rho** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` s\ :sup:`-1` Description,Tendency of dry density from dynamics Accessed in code, as rho_zz from the tend | **tend_rho_physics** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-3` s\ :sup:`-1` Description,Total dry air tendency from physics Accessed in code, as tend_rho_physics from the tend_physics | **tend_rtheta_physics** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` Description,Total rho*theta/zz tendency from physics Accessed in code, as tend_rtheta_physics from the tend_physics | **tend_ru_physics** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,Total horizontal momentum tendency from physics Accessed in code, as tend_ru_physics from the tend_physics | **tend_sfc_pressure** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa s\ :sup:`-1` Description,Tendency of surface pressure Accessed in code, as tend_sfc_pressure from the tend | **tend_theta** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg K m\ :sup:`-3` s\ :sup:`-1` Description,tendency of coupled potential temperature rho*theta_m/zz from dynamics and physics\, updated each RK step Accessed in code, as theta_m from the tend | **tend_u** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Tendency of u from dynamics Accessed in code, as u from the tend | **tend_u_phys** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Normal wind tendencies from physics parameterizations Accessed in code, as tend_u_phys from the diag | **tend_umerid** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` s\ :sup:`-1` Description,Total cell-centered meridional wind tendency from physics Accessed in code, as tend_umerid from the tend_physics | **tend_uzonal** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` s\ :sup:`-1` Description,Total cell-centered zonal wind tendency from physics Accessed in code, as tend_uzonal from the tend_physics | **tend_w** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Tendency of w from dynamics Accessed in code, as w from the tend | **tend_w_buoy** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Tendency of w due to buoyancy force Accessed in code, as w_buoy from the tend | **tend_w_pgf** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-2` Description,Tendency of w due to pressure gradient force Accessed in code, as w_pgf from the tend | **ter** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,terrain height Accessed in code, as ter from the sfc_input | **th2m** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,2-meter potential temperature Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as th2m from the diag_physics | **thc** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Cal cm\ :sup:`-2` K\ :sup:`-1` s\ :sup:`-0.5` Description,thermal inertia Accessed in code, as thc from the diag_physics | **theta** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Potential temperature Accessed in code, as theta from the diag | **theta_amb** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Potential temperature increment Accessed in code, as theta from the tend_iau | **theta_base** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Base state potential temperature Accessed in code, as theta_base from the diag | **theta_m** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Moist potential temperature: theta*(1+q_v*R_v/R_d) Accessed in code, as theta_m from the state | **theta_pv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,Potential temperature on dynamic tropopause Accessed in code, as theta_pv from the diag | **Time** (real) (Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,seconds since YYYY-MM-DD hh:mm:ss Description,CF-compliant valid time Accessed in code, as Time from the state | **tke_pbl** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2`` s\ :sup:`-2` Description,turbulent kinetic energy from PBL Allocated by, bl_mynn_in Accessed in code, as tke_pbl from the diag_physics | **tlag** (real) (nLags, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,daily mean surface temperature of prior days Accessed in code, as tlag from the diag_physics | **tmn** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,deep soil temperature Accessed in code, as tmn from the sfc_input | **tslb** (real) (nSoilLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,soil layer temperature Accessed in code, as tslb from the sfc_input | **tsq** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K\ :sup:`2` Description,liquid water potential temperature variance Allocated by, bl_mynn_in Accessed in code, as tsq from the diag_physics | **tyear_accum** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,accumulated yearly surface temperature for current year Accessed in code, as tyear_accum from the diag_physics | **tyear_mean** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,K Description,annual mean surface temperature Accessed in code, as tyear_mean from the diag_physics | **u** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Horizontal normal velocity at edges Accessed in code, as u from the state | **u10** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,10-meter zonal wind Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as u10 from the diag_physics | **u_amb** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Horizontal normal velocity increment Accessed in code, as u from the tend_iau | **u_init** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,u reference profile Accessed in code, as u_init from the mesh | **u_pv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Zonal wind on dynamic tropopause Accessed in code, as u_pv from the diag | **udrunoff** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,mm Description,underground runoff Accessed in code, as udrunoff from the diag_physics | **umeridional_100hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 100 hPa Accessed in code, as umeridional_100hPa from the diag | **umeridional_1km** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Meridional wind component at 1 km AGL Accessed in code, as umeridional_1km from the diag | **umeridional_200hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 200 hPa Accessed in code, as umeridional_200hPa from the diag | **umeridional_250hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 250 hPa Accessed in code, as umeridional_250hPa from the diag | **umeridional_500hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 500 hPa Accessed in code, as umeridional_500hPa from the diag | **umeridional_50hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 50 hPa Accessed in code, as umeridional_50hPa from the diag | **umeridional_6km** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Meridional wind component at 6 km AGL Accessed in code, as umeridional_6km from the diag | **umeridional_700hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 700 hPa Accessed in code, as umeridional_700hPa from the diag | **umeridional_850hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 850 hPa Accessed in code, as umeridional_850hPa from the diag | **umeridional_925hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed meridional wind at cell centers\, vertically interpolated to 925 hPa Accessed in code, as umeridional_925hPa from the diag | **umeridional_surface** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Meridional wind component at midpoint of lowest model layer Accessed in code, as umeridional_surface from the diag | **updraft_helicity_max** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m\ :sup:`2` s\ :sup:`-2` Description,Maximum updraft helicity since last output Accessed in code, as updraft_helicity_max from the diag | **uReconstructMeridional** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Meridional component of reconstructed horizontal velocity at cell centers Accessed in code, as uReconstructMeridional from the diag | **uReconstructX** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Cartesian x-component of reconstructed horizontal velocity at cell centers Accessed in code, as uReconstructX from the diag | **uReconstructY** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Cartesian y-component of reconstructed horizontal velocity at cell centers Accessed in code, as uReconstructY from the diag | **uReconstructZ** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Cartesian z-component of reconstructed horizontal velocity at cell centers Accessed in code, as uReconstructZ from the diag | **uReconstructZonal** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Zonal component of reconstructed horizontal velocity at cell centers Accessed in code, as uReconstructZonal from the diag | **ust** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,U* in similarity theory Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as ust from the diag_physics | **ustm** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,U* in similarity theory without vconv Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as ustm from the diag_physics | **uzonal_100hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 100 hPa Accessed in code, as uzonal_100hPa from the diag | **uzonal_1km** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Zonal wind component at 1 km AGL Accessed in code, as uzonal_1km from the diag | **uzonal_200hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 200 hPa Accessed in code, as uzonal_200hPa from the diag | **uzonal_250hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 250 hPa Accessed in code, as uzonal_250hPa from the diag | **uzonal_500hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 500 hPa Accessed in code, as uzonal_500hPa from the diag | **uzonal_50hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 50 hPa Accessed in code, as uzonal_50hPa from the diag | **uzonal_6km** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Zonal wind component at 6 km AGL Accessed in code, as uzonal_6km from the diag | **uzonal_700hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 700 hPa Accessed in code, as uzonal_700hPa from the diag | **uzonal_850hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 850 hPa Accessed in code, as uzonal_850hPa from the diag | **uzonal_925hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Reconstructed zonal wind at cell centers\, vertically interpolated to 925 hPa Accessed in code, as uzonal_925hPa from the diag | **uzonal_surface** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Zonal wind component at midpoint of lowest model layer Accessed in code, as uzonal_surface from the diag | **v** (real) (nVertLevels, nEdges, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Horizontal tangential velocity at edges Accessed in code, as v from the diag | **v10** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,10-meter meridional wind Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as v10 from the diag_physics | **v_init** (real) (nVertLevels) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,v reference profile Accessed in code, as v_init from the mesh | **v_pv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Meridional wind on dynamic tropopause Accessed in code, as v_pv from the diag | **var2d** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,standard deviation of subgrid-scale orography Accessed in code, as var2d from the sfc_input | **vegfra** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,vegetation fraction Accessed in code, as vegfra from the sfc_input | **verticesOnCell** (integer) (maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of vertices (corner points) of a cell Accessed in code, as verticesOnCell from the mesh | **verticesOnEdge** (integer) (TWO, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,- Description,IDs of the two vertex endpoints of an edge Accessed in code, as verticesOnEdge from the mesh | **vort_pv** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vertical vorticity on dynamic tropopause Accessed in code, as vort_pv from the diag | **vorticity** (real) (nVertLevels, nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity at vertices Accessed in code, as vorticity from the diag | **vorticity_100hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 100 hPa Accessed in code, as vorticity_100hPa from the diag | **vorticity_200hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 200 hPa Accessed in code, as vorticity_200hPa from the diag | **vorticity_250hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 250 hPa Accessed in code, as vorticity_250hPa from the diag | **vorticity_500hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 500 hPa Accessed in code, as vorticity_500hPa from the diag | **vorticity_50hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 50 hPa Accessed in code, as vorticity_50hPa from the diag | **vorticity_700hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 700 hPa Accessed in code, as vorticity_700hPa from the diag | **vorticity_850hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 850 hPa Accessed in code, as vorticity_850hPa from the diag | **vorticity_925hPa** (real) (nVertices, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,s\ :sup:`-1` Description,Relative vorticity vertically interpolated to 925 hPa Accessed in code, as vorticity_925hPa from the diag | **w** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity at vertical cell faces Accessed in code, as w from the state | **w0avg** (real) (nVertLevels, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,time running-averaged vertical velocity Allocated by, cu_kain_fritsch_in Accessed in code, as w0avg from the diag_physics | **w_100hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 100 hPa Accessed in code, as w_100hPa from the diag | **w_200hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 200 hPa Accessed in code, as w_200hPa from the diag | **w_250hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 250 hPa Accessed in code, as w_250hPa from the diag | **w_500hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 500 hPa Accessed in code, as w_500hPa from the diag | **w_50hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 50 hPa Accessed in code, as w_50hPa from the diag | **w_700hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 700 hPa Accessed in code, as w_700hPa from the diag | **w_850hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 850 hPa Accessed in code, as w_850hPa from the diag | **w_925hPa** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Vertical velocity vertically interpolated to 925 hPa Accessed in code, as w_925hPa from the diag | **w_velocity_max** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Maximum column w velocity since last output Accessed in code, as w_velocity_max from the diag | **weightsOnEdge** (real) (maxEdges2, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Weights used in reconstruction of tangential velocity for an edge Accessed in code, as weightsOnEdge from the mesh | **wind_speed_level1_max** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,Maximum wind speed in lowest model level since last output Accessed in code, as wind_speed_level1_max from the diag | **wspd** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,wind speed at lowest model level Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as wspd from the diag_physics | **wstar** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m s\ :sup:`-1` Description,mixed velocity scale from PBL scheme Allocated by, bl_ysu_in Accessed in code, as wstar from the diag_physics | **wwAvg** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,time-averaged rho*omega/zz used in scalar transport Accessed in code, as wwAvg from the diag | **wwAvg_split** (real) (nVertLevelsP1, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,time-averaged rho*omega/zz used in scalar transport Accessed in code, as wwAvg_split from the diag | **xCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian x-coordinate of cells Accessed in code, as xCell from the mesh | **xEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian x-coordinate of edges Accessed in code, as xEdge from the mesh | **xice** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,fractional area coverage of sea-ice Accessed in code, as xice from the sfc_input | **xicem** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,sea-ice flag from previsous time-step Accessed in code, as xicem from the diag_physics | **xland** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,land-ocean mask (1=land including sea-ice ; 2=ocean) Accessed in code, as xland from the sfc_input | **xmb_shallow** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,cloud base mass flux for shallow convection Allocated by, cu_grell_freitas_in Accessed in code, as xmb_shallow from the diag_physics | **xmb_total** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,kg m\ :sup:`-2` s\ :sup:`-1` Description,cloud-base mass flux Allocated by, cu_grell_freitas_in Accessed in code, as xmb_total from the diag_physics | **xtime** (text) (Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,YYYY-MM-DD_hh:mm:ss Description,Model valid time Accessed in code, as xtime from the state | **xVertex** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian x-coordinate of vertices Accessed in code, as xVertex from the mesh | **yCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian y-coordinate of cells Accessed in code, as yCell from the mesh | **yEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian y-coordinate of edges Accessed in code, as yEdge from the mesh | **yVertex** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian y-coordinate of vertices Accessed in code, as yVertex from the mesh | **z0** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,roughness height Accessed in code, as z0 from the diag_physics | **z_iso_levels** (real) (nIsoLevelsZ) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,Pa Description,Levels for vertical interpolation of height to isobaric surfaces Accessed in code, as z_iso_levels from the diag | **z_isobaric** (real) (nIsoLevelsZ, nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Height interpolated to isobaric surfaces defined in z_iso_levels Accessed in code, as z_isobaric from the diag | **zb** (real) (nVertLevelsP1, TWO, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coefficients for contribution from u to omega diagnosis\, edge-oriented Accessed in code, as zb from the mesh | **zb3** (real) (nVertLevelsP1, TWO, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coefficients for 3rd-order correction to contribution from u to omega diagnosis\, edge-oriented Accessed in code, as zb3 from the mesh | **zb3_cell** (real) (nVertLevelsP1, maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coefficients for 3rd-order correction to contribution from u to omega diagnosis\, cell-oriented Accessed in code, as zb3_cell from the mesh | **zb_cell** (real) (nVertLevelsP1, maxEdges, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,Coefficients for contribution from u to omega diagnosis\, cell-oriented Accessed in code, as zb_cell from the mesh | **zCell** (real) (nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian z-coordinate of cells Accessed in code, as zCell from the mesh | **zEdge** (real) (nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian z-coordinate of edges Accessed in code, as zEdge from the mesh | **zgrid** (real) (nVertLevelsP1, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m MSL Description,Geometric height of layer interfaces Accessed in code, as zgrid from the mesh | **znt** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,roughness length Accessed in code, as znt from the diag_physics | **zol** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,z/L height over Monin-Obukhov length Allocated by, bl_mynn_in\, bl_ysu_in Accessed in code, as zol from the diag_physics | **zs** (real) (nCells, Time) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,depth of centers of soil layers Accessed in code, as zs from the diag_physics | **zVertex** (real) (nVertices) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,m Description,Cartesian z-coordinate of vertices Accessed in code, as zVertex from the mesh | **zxu** (real) (nVertLevels, nEdges) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,dz/dx on horizontal coordinate surfaces at u levels Accessed in code, as zxu from the mesh | **zz** (real) (nVertLevels, nCells) .. csv-table:: :widths: 20,60 :width: 80% :escape: \ Units,unitless Description,d(zeta)/dz\, vertical metric term Accessed in code, as zz from the mesh | | |