!WRF:DRIVER_LAYER:IO
!
#define DEBUG_LVL 50
!#define mpi_x_comm_size(i,j,k) Mpi_Comm_Size ( i,j,k ) ; write(0,*) __LINE__
#define mpi_x_comm_size(i,j,k) Mpi_Comm_Size ( i,j,k )
MODULE module_wrf_quilt
!
!
! This module contains WRF-specific I/O quilt routines called by both
! client (compute) and server (I/O quilt) tasks. I/O quilt servers are
! a run-time optimization that allow I/O operations, executed on the I/O
! quilt server tasks, to be overlapped with useful computation, executed on
! the compute tasks. Since I/O operations are often quite slow compared to
! computation, this performance optimization can increase parallel
! efficiency.
!
! Currently, one group of I/O servers can be specified at run-time. Namelist
! variable "nio_tasks_per_group" is used to specify the number of I/O server
! tasks in this group. In most cases, parallel efficiency is optimized when
! the minimum number of I/O server tasks are used. If memory needed to cache
! I/O operations fits on a single processor, then set nio_tasks_per_group=1.
! If not, increase the number of I/O server tasks until I/O operations fit in
! memory. In the future, multiple groups of I/O server tasks will be
! supported. The number of groups will be specified by namelist variable
! "nio_groups". For now, nio_groups must be set to 1. Currently, I/O servers
! only support overlap of output operations with computation. Also, only I/O
! packages that do no support native parallel I/O may be used with I/O server
! tasks. This excludes PHDF5 and MCEL.
!
! In this module, the I/O quilt server tasks call package-dependent
! WRF-specific I/O interfaces to perform I/O operations requested by the
! client (compute) tasks. All of these calls occur inside subroutine
! quilt().
!
! The client (compute) tasks call package-independent WRF-specific "quilt I/O"
! interfaces that send requests to the I/O quilt servers. All of these calls
! are made from module_io.F.
!
! These routines have the same names and (roughly) the same arguments as those
! specified in the WRF I/O API except that:
! - "Quilt I/O" routines defined in this file and called by routines in
! module_io.F have the "wrf_quilt_" prefix.
! - Package-dependent routines called from routines in this file are defined
! in the external I/O packages and have the "ext_" prefix.
!
! Both client (compute) and server tasks call routine init_module_wrf_quilt()
! which then calls setup_quilt_servers() determine which tasks are compute
! tasks and which are server tasks. Before the end of init_module_wrf_quilt()
! server tasks call routine quilt() and remain there for the rest of the model
! run. Compute tasks return from init_module_wrf_quilt() to perform model
! computations.
!
! See http://www.mmm.ucar.edu/wrf/WG2/software_2.0/IOAPI.doc for the latest
! version of the WRF I/O API. This document includes detailed descriptions
! of subroutines and their arguments that are not duplicated here.
!
!
USE module_internal_header_util
INTEGER, PARAMETER :: int_num_handles = 99
LOGICAL, DIMENSION(int_num_handles) :: okay_to_write, int_handle_in_use, okay_to_commit
INTEGER, DIMENSION(int_num_handles) :: int_num_bytes_to_write, io_form
REAL, POINTER :: int_local_output_buffer(:)
INTEGER :: int_local_output_cursor
LOGICAL :: quilting_enabled
LOGICAL :: disable_quilt = .FALSE.
#ifdef DM_PARALLEL
INTEGER mpi_comm_local
INTEGER mpi_comm_io_groups(100)
INTEGER nio_tasks_in_group
INTEGER nio_groups
INTEGER nio_tasks_per_group
INTEGER ncompute_tasks
INTEGER ntasks
INTEGER mytask
INTEGER, PARAMETER :: onebyte = 1
INTEGER comm_io_servers, iserver, hdrbufsize, obufsize
INTEGER, DIMENSION(4096) :: hdrbuf
INTEGER, DIMENSION(int_num_handles) :: handle
#endif
CONTAINS
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
SUBROUTINE int_get_fresh_handle( retval )
!
!
! Find an unused "client file handle" and return it in retval.
! The "client file handle" is used to remember how a file was opened
! so clients do not need to ask the I/O quilt servers for this information.
! It is also used as a file identifier in communications with the I/O
! server task.
!
! Note that client tasks know nothing about package-specific handles.
! Only the I/O quilt servers know about them.
!
!
INTEGER i, retval
retval = -1
DO i = 1, int_num_handles
IF ( .NOT. int_handle_in_use(i) ) THEN
retval = i
GOTO 33
ENDIF
ENDDO
33 CONTINUE
IF ( retval < 0 ) THEN
CALL wrf_error_fatal("frame/module_io_quilt.F: int_get_fresh_handle() can not")
ENDIF
int_handle_in_use(i) = .TRUE.
NULLIFY ( int_local_output_buffer )
END SUBROUTINE int_get_fresh_handle
SUBROUTINE setup_quilt_servers ( nio_tasks_per_group, &
mytask, &
ntasks, &
n_groups_arg, &
nio, &
mpi_comm_wrld, &
mpi_comm_local, &
mpi_comm_io_groups)
!
!
! Both client (compute) and server tasks call this routine to
! determine which tasks are compute tasks and which are I/O server tasks.
!
! Module variables MPI_COMM_LOCAL and MPI_COMM_IO_GROUPS(:) are set up to
! contain MPI communicators as follows:
!
! MPI_COMM_LOCAL is the communicator for the local groups of tasks. For the
! compute tasks it is the group of compute tasks; for a server group it the
! communicator of tasks in the server group.
!
! Elements of MPI_COMM_IO_GROUPS are communicators that each contain one or
! more compute tasks and a single I/O server assigned to those compute tasks.
! The I/O server tasks is always the last task in these communicators.
! On a compute task, which has a single associate in each of the server
! groups, MPI_COMM_IO_GROUPS is treated as an array; each element corresponds
! to a different server group.
! On a server task only the first element of MPI_COMM_IO_GROUPS is used
! because each server task is part of only one io_group.
!
! I/O server tasks in each I/O server group are divided among compute tasks as
! evenly as possible.
!
! When multiple I/O server groups are used, each must have the same number of
! tasks. When the total number of extra I/O tasks does not divide evenly by
! the number of io server groups requested, the remainder tasks are not used
! (wasted).
!
! For example, communicator membership for 18 tasks with nio_groups=2 and
! nio_tasks_per_group=3 is shown below:
!
! Membership for MPI_COMM_LOCAL communicators:
! COMPUTE TASKS: 0 1 2 3 4 5 6 7 8 9 10 11
! 1ST I/O SERVER GROUP: 12 13 14
! 2ND I/O SERVER GROUP: 15 16 17
!
! Membership for MPI_COMM_IO_GROUPS(1):
! COMPUTE TASKS 0, 3, 6, 9: 0 3 6 9 12
! COMPUTE TASKS 1, 4, 7,10: 1 4 7 10 13
! COMPUTE TASKS 2, 5, 8,11: 2 5 8 11 14
! I/O SERVER TASK 12: 0 3 6 9 12
! I/O SERVER TASK 13: 1 4 7 10 13
! I/O SERVER TASK 14: 2 5 8 11 14
! I/O SERVER TASK 15: 0 3 6 9 15
! I/O SERVER TASK 16: 1 4 7 10 16
! I/O SERVER TASK 17: 2 5 8 11 17
!
! Membership for MPI_COMM_IO_GROUPS(2):
! COMPUTE TASKS 0, 3, 6, 9: 0 3 6 9 15
! COMPUTE TASKS 1, 4, 7,10: 1 4 7 10 16
! COMPUTE TASKS 2, 5, 8,11: 2 5 8 11 17
! I/O SERVER TASK 12: ** not used **
! I/O SERVER TASK 13: ** not used **
! I/O SERVER TASK 14: ** not used **
! I/O SERVER TASK 15: ** not used **
! I/O SERVER TASK 16: ** not used **
! I/O SERVER TASK 17: ** not used **
!
!
!
IMPLICIT NONE
INCLUDE 'mpif.h'
INTEGER, INTENT(IN) :: nio_tasks_per_group, mytask, ntasks, &
n_groups_arg, mpi_comm_wrld
INTEGER, INTENT(OUT) :: mpi_comm_local, nio
INTEGER, DIMENSION(100), INTENT(OUT) :: mpi_comm_io_groups
! Local
INTEGER :: i, j, ii, comdup, ierr, niotasks, n_groups
INTEGER, DIMENSION(ntasks) :: icolor
CHARACTER*128 mess
n_groups = n_groups_arg
IF ( n_groups .LT. 1 ) n_groups = 1
!
!
! nio is number of io tasks per group. If there arent enough tasks to satisfy
! the requirement that there be at least as many compute tasks as io tasks in
! each group, then just print a warning and dump out of quilting
!
!
nio = nio_tasks_per_group
ncompute_tasks = ntasks - (nio * n_groups)
IF ( ncompute_tasks .LT. nio ) THEN
WRITE(mess,'("Not enough tasks to have ",I3," groups of ",I3," I/O tasks. No quilting.")')n_groups,nio
nio = 0
ncompute_tasks = ntasks
ELSE
WRITE(mess,'("Quilting with ",I3," groups of ",I3," I/O tasks.")')n_groups,nio
ENDIF
CALL wrf_message(mess)
IF ( nio .LT. 0 ) THEN
nio = 0
ENDIF
IF ( nio .EQ. 0 ) THEN
quilting_enabled = .FALSE.
mpi_comm_local = MPI_COMM_WORLD
mpi_comm_io_groups = MPI_COMM_WORLD
RETURN
ENDIF
quilting_enabled = .TRUE.
! First construct the local communicators
! prepare to split the communicator by designating compute-only tasks
DO i = 1, ncompute_tasks
icolor(i) = 0
ENDDO
ii = 1
! and designating the groups of i/o tasks
DO i = ncompute_tasks+1, ntasks, nio
DO j = i, i+nio-1
icolor(j) = ii
ENDDO
ii = ii+1
ENDDO
CALL MPI_Comm_dup(mpi_comm_wrld,comdup,ierr)
CALL MPI_Comm_split(comdup,icolor(mytask+1),mytask,mpi_comm_local,ierr)
! Now construct the communicators for the io_groups; round-robining the compute tasks
DO i = 1, ncompute_tasks
icolor(i) = mod(i-1,nio)
ENDDO
! ... and add the io servers as the last task in each group
DO j = 1, n_groups
! TBH: each I/O group will contain only one I/O server
DO i = ncompute_tasks+1,ntasks
icolor(i) = MPI_UNDEFINED
ENDDO
ii = 0
DO i = ncompute_tasks+(j-1)*nio+1,ncompute_tasks+j*nio
icolor(i) = ii
ii = ii+1
ENDDO
CALL MPI_Comm_dup(mpi_comm_wrld,comdup,ierr)
CALL MPI_Comm_split(comdup,icolor(mytask+1),mytask,mpi_comm_io_groups(j),ierr)
ENDDO
! If I am an I/O server, figure out which group I'm in and make that group's
! communicator the first element in the mpi_comm_io_groups array (I will ignore
! all of the other elements).
IF ( mytask+1 .GT. ncompute_tasks ) THEN
niotasks = ntasks - ncompute_tasks
i = mytask - ncompute_tasks
j = i / nio + 1
mpi_comm_io_groups(1) = mpi_comm_io_groups(j)
ENDIF
END SUBROUTINE setup_quilt_servers
SUBROUTINE quilt
!
!
! I/O server tasks call this routine and remain in it for the rest of the
! model run. I/O servers receive I/O requests from compute tasks and
! perform requested I/O operations by calling package-dependent WRF-specific
! I/O interfaces. Requests are sent in the form of "data headers". Each
! request has a unique "header" message associated with it. For requests that
! contain large amounts of data, the data is appended to the header. See
! file module_internal_header_util.F for detailed descriptions of all
! headers.
!
! We wish to be able to link to different packages depending on whether
! the I/O is restart, initial, history, or boundary.
!
!
USE module_state_description
USE module_quilt_outbuf_ops
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INCLUDE 'wrf_io_flags.h'
INTEGER itag, ninbuf, ntasks_io_group, ntasks_local_group, mytask_local, ierr
INTEGER istat
INTEGER mytask_io_group
INTEGER :: nout_set = 0
INTEGER :: obufsize, bigbufsize, inttypesize, chunksize, sz
REAL, DIMENSION(1) :: dummy
INTEGER, ALLOCATABLE, DIMENSION(:) :: obuf, bigbuf
REAL, ALLOCATABLE, DIMENSION(:) :: RDATA
INTEGER, ALLOCATABLE, DIMENSION(:) :: IDATA
CHARACTER (LEN=512) :: CDATA
CHARACTER (LEN=80) :: fname
INTEGER icurs, hdrbufsize, itypesize, ftypesize, Status, fstat, io_form_arg
INTEGER :: DataHandle, FieldType, Comm, IOComm, DomainDesc, code, Count
INTEGER, DIMENSION(3) :: DomainStart , DomainEnd , MemoryStart , MemoryEnd , PatchStart , PatchEnd
INTEGER :: dummybuf(1)
CHARACTER (len=80) :: DateStr , Element, VarName, MemoryOrder , Stagger , DimNames(3), FileName, SysDepInfo, mess
INTEGER, EXTERNAL :: use_package
LOGICAL :: stored_write_record, retval
INTEGER iii, jjj, vid
!
!
!
! Call ext_pkg_ioinit() routines to initialize I/O packages.
!
!
SysDepInfo = " "
#ifdef NETCDF
CALL ext_ncd_ioinit( SysDepInfo, ierr)
#endif
#ifdef INTIO
CALL ext_int_ioinit( SysDepInfo, ierr )
#endif
#ifdef XXX
CALL ext_xxx_ioinit( SysDepInfo, ierr)
#endif
#ifdef YYY
CALL ext_yyy_ioinit( SysDepInfo, ierr)
#endif
#ifdef ZZZ
CALL ext_zzz_ioinit( SysDepInfo, ierr)
#endif
#ifdef GRIB1
CALL ext_gr1_ioinit( SysDepInfo, ierr)
#endif
#ifdef GRIB2
CALL ext_gr2_ioinit( SysDepInfo, ierr)
#endif
okay_to_commit = .false.
stored_write_record = .false.
ninbuf = 0
! get info. about the I/O server group that this I/O server task
! belongs to
! Last task in this I/O server group is the I/O server "root"
! The I/O server "root" actually writes data to disk
! TBH: WARNING: This is also implicit in the call to collect_on_comm().
CALL mpi_x_comm_size( mpi_comm_io_groups(1), ntasks_io_group, ierr )
CALL MPI_COMM_RANK( mpi_comm_io_groups(1), mytask_io_group, ierr )
CALL mpi_x_comm_size( mpi_comm_local, ntasks_local_group, ierr )
CALL MPI_COMM_RANK( mpi_comm_local, mytask_local, ierr )
CALL MPI_TYPE_SIZE( MPI_INTEGER, inttypesize, ierr )
IF ( inttypesize <= 0 ) THEN
CALL wrf_error_fatal("external/RSL/module_dm.F: quilt: type size <= 0 invalid")
ENDIF
! infinite loop until shutdown message received
!
!
! This is the main request-handling loop. I/O quilt servers stay in this loop
! until the model run ends.
!
!
DO WHILE (.TRUE.)
!
!
! Each I/O server receives requests from its compute tasks. Each request
! is contained in a data header (see module_internal_header_util.F for
! detailed descriptions of data headers).
! Each request is sent in two phases. First, sizes of all messages that
! will be sent from the compute tasks to this I/O server are summed on the
! I/O server via MPI_reduce(). The I/O server then allocates buffer "obuf"
! and receives concatenated messages from the compute tasks in it via the
! call to collect_on_comm(). Note that "sizes" are generally expressed in
! *bytes* in this code so conversion to "count" (number of Fortran words) is
! required for Fortran indexing and MPI calls.
!
!
! wait for info from compute tasks in the I/O group that we're ready to rock
! obufsize will contain number of *bytes*
CALL MPI_Reduce( ninbuf, obufsize, 1, MPI_INTEGER, &
MPI_SUM, mytask_io_group, &
mpi_comm_io_groups(1), ierr )
!write(0,*)'ninbuf ',ninbuf,' obufsize ', obufsize
!
!
! Negative obufsize will trigger I/O server exit.
!
!
IF ( obufsize .LT. 0 ) THEN
#ifdef NETCDF
CALL ext_ncd_ioexit( Status )
#endif
#ifdef INTIO
CALL ext_int_ioexit( Status )
#endif
#ifdef XXX
CALL ext_xxx_ioexit( Status )
#endif
#ifdef YYY
CALL ext_yyy_ioexit( Status )
#endif
#ifdef ZZZ
CALL ext_zzz_ioexit( Status )
#endif
#ifdef GRIB1
CALL ext_gr1_ioexit( Status )
#endif
#ifdef GRIB2
CALL ext_gr2_ioexit( Status )
#endif
CALL wrf_message ( 'I/O QUILT SERVERS DONE' )
CALL mpi_finalize(ierr)
STOP
ENDIF
!
!
! Allocate buffer obuf to be big enough for the data the compute tasks
! will send. Note: obuf is size in *bytes* so we need to pare this
! down, since the buffer is INTEGER.
!
!
!write(0,*)'allocating obuf: ',(obufsize+1)/inttypesize
ALLOCATE( obuf( (obufsize+1)/inttypesize ) )
!call mpi_comm_size( mpi_comm_io_groups(1), iii, ierr )
!write(0,*)'mpi_comm_size mpi_comm_io_groups() ',iii
!call mpi_comm_rank( mpi_comm_io_groups(1), iii, ierr )
!write(0,*)'mpi_comm_rank mpi_comm_io_groups() ',iii
!
!
! let's roll; get the data from the compute procs and put in obuf
!
!
CALL collect_on_comm( mpi_comm_io_groups(1), &
onebyte, &
dummy, 0, &
obuf, obufsize )
!write(0,*)'calling init_store_piece_of_field'
!
!
! Now all messages received from the compute clients are stored in
! obuf. Scan through obuf and extract headers and field data and store in
! internal buffers. The scan is done twice, first to determine sizes of
! internal buffers required for storage of headers and fields and second to
! actually store the headers and fields. This bit of code does not do the
! "quilting" (assembly of patches into full domains). For each field, it
! simply concatenates all received patches for the field into a separate
! internal buffer (i.e. one buffer per field). Quilting is done later by
! routine store_patch_in_outbuf().
!
!
CALL init_store_piece_of_field
CALL mpi_type_size ( MPI_INTEGER , itypesize , ierr )
!write(0,*)'mpi_type_size returns ', itypesize
!
!
! Scan obuf the first time to calculate the size of the buffer required for
! each field. Calls to add_to_bufsize_for_field() accumulate sizes.
!
!
vid = 0
icurs = inttypesize
DO WHILE ( icurs .lt. obufsize )
SELECT CASE ( get_hdr_tag( obuf ( icurs / inttypesize ) ) )
CASE ( int_field )
CALL int_get_write_field_header ( obuf(icurs/inttypesize), hdrbufsize, itypesize, ftypesize, &
DataHandle , DateStr , VarName , Dummy , FieldType , Comm , IOComm, &
DomainDesc , MemoryOrder , Stagger , DimNames , &
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd )
chunksize = (PatchEnd(1)-PatchStart(1)+1)*(PatchEnd(2)-PatchStart(2)+1)* &
(PatchEnd(3)-PatchStart(3)+1)*ftypesize
!write(0,*) 'X-1', hdrbufsize, get_hdr_tag( obuf ( icurs / inttypesize ) ) , get_hdr_rec_size( obuf ( icurs / inttypesize ) ), TRIM(VarName)
call add_to_bufsize_for_field( VarName, hdrbufsize )
icurs = icurs + hdrbufsize
! If this is a real write (i.e. not a training write), accumulate
! buffersize for this field.
IF ( DomainDesc .NE. 333933 ) THEN ! magic number
!write(0,*) 'X-1a', chunksize, TRIM(VarName)
call add_to_bufsize_for_field( VarName, chunksize )
icurs = icurs + chunksize
ENDIF
CASE DEFAULT
hdrbufsize = obuf(icurs/inttypesize)
write(VarName,'(I5.5)')vid
!write(0,*) 'X-2', hdrbufsize, get_hdr_tag( obuf ( icurs / inttypesize ) ) , get_hdr_rec_size( obuf ( icurs / inttypesize ) ), TRIM(VarName)
call add_to_bufsize_for_field( VarName, hdrbufsize )
icurs = icurs + hdrbufsize
vid = vid+1
END SELECT
ENDDO
!
!
! Store the headers and field data in internal buffers. The first call to
! store_piece_of_field() allocates internal buffers using sizes computed by
! calls to add_to_bufsize_for_field().
!
!
vid = 0
icurs = inttypesize
DO WHILE ( icurs .lt. obufsize )
!write(0,*) 'A icurs ', icurs, ' obufsize ', obufsize
SELECT CASE ( get_hdr_tag( obuf ( icurs / inttypesize ) ) )
CASE ( int_field )
CALL int_get_write_field_header ( obuf(icurs/inttypesize), hdrbufsize, itypesize, ftypesize, &
DataHandle , DateStr , VarName , Dummy , FieldType , Comm , IOComm, &
DomainDesc , MemoryOrder , Stagger , DimNames , &
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd )
chunksize = (PatchEnd(1)-PatchStart(1)+1)*(PatchEnd(2)-PatchStart(2)+1)* &
(PatchEnd(3)-PatchStart(3)+1)*ftypesize
call store_piece_of_field( obuf(icurs/inttypesize), VarName, hdrbufsize )
!write(0,*) 'A-1', hdrbufsize, get_hdr_tag( obuf ( icurs / inttypesize ) ) , get_hdr_rec_size( obuf ( icurs / inttypesize ) ), TRIM(VarName)
icurs = icurs + hdrbufsize
! If this is a real write (i.e. not a training write), store
! this piece of this field.
IF ( DomainDesc .NE. 333933 ) THEN ! magic number
!write(0,*) 'A-1a', chunksize, TRIM(VarName)
call store_piece_of_field( obuf(icurs/inttypesize), VarName, chunksize )
icurs = icurs + chunksize
ENDIF
CASE DEFAULT
hdrbufsize = obuf(icurs/inttypesize)
write(VarName,'(I5.5)')vid
call store_piece_of_field( obuf(icurs/inttypesize), VarName, hdrbufsize )
!write(0,*) 'A-2', hdrbufsize, get_hdr_tag( obuf ( icurs / inttypesize ) ) , get_hdr_rec_size( obuf ( icurs / inttypesize ) ), TRIM(VarName)
icurs = icurs + hdrbufsize
vid = vid+1
END SELECT
ENDDO
!call mpi_comm_size( mpi_comm_local, iii, ierr )
!write(0,*)'mpi_comm_size mpi_comm_local ',iii
!call mpi_comm_rank( mpi_comm_local, iii, ierr )
!write(0,*)'mpi_comm_rank mpi_comm_local ',iii
!write(0,*)'calling init_retrieve_pieces_of_field '
!
!
! Now, for each field, retrieve headers and patches (data) from the internal
! buffers and collect them all on the I/O quilt server "root" task.
!
!
CALL init_retrieve_pieces_of_field
!
!
! Retrieve header and all patches for the first field from the internal
! buffers.
!
!
CALL retrieve_pieces_of_field ( obuf , VarName, obufsize, sz, retval )
!write(0,*)'calling first retrieve_pieces_of_field ',TRIM(VarName),obufsize,sz,retval
!
!
! Sum sizes of all headers and patches (data) for this field from all I/O
! servers in this I/O server group onto the I/O server "root".
!
!
CALL MPI_Reduce( sz, bigbufsize, 1, MPI_INTEGER, &
MPI_SUM, ntasks_local_group-1, &
mpi_comm_local, ierr )
!write(0,*)'after MPI_Reduce ',sz, bigbufsize
!
!
! Loop until there are no more fields to retrieve from the internal buffers.
!
!
DO WHILE ( retval )
!write(0,*)' VarName ',TRIM(VarName),' sz ',sz,' bigbufsize ',bigbufsize
!
!
! I/O server "root" allocates space to collect headers and fields from all
! other servers in this I/O server group.
!
!
IF ( mytask_local .EQ. ntasks_local_group-1 ) THEN
!write(0,*)'allocating bufbuf ', (bigbufsize+1)/inttypesize
ALLOCATE( bigbuf( (bigbufsize+1)/inttypesize ) )
ENDIF
!write(0,*)'before collect_on_comm tag,size ',Trim(VarName),get_hdr_tag(obuf),get_hdr_rec_size(obuf)
!
!
! Collect buffers and fields from all I/O servers in this I/O server group
! onto the I/O server "root"
!
!
CALL collect_on_comm( mpi_comm_local, &
onebyte, &
obuf, sz, &
bigbuf, bigbufsize )
!write(0,*)'after collect_on_comm ', sz, bigbufsize
!
!
! The I/O server "root" now handles collected requests from all compute
! tasks served by this I/O server group (i.e. all compute tasks).
!
!
IF ( mytask_local .EQ. ntasks_local_group-1 ) THEN
!jjj = 4
!do iii = 1, ntasks_local_group
! write(0,*)'i,j,tag,size ', iii, jjj, get_hdr_tag(bigbuf(jjj/4)),get_hdr_rec_size(bigbuf(jjj/4))
! jjj = jjj + get_hdr_rec_size(bigbuf(jjj/4))
!enddo
icurs = inttypesize ! icurs is a byte counter, but buffer is integer
stored_write_record = .false.
!
!
! The I/O server "root" loops over the collected requests.
!
!
DO WHILE ( icurs .lt. bigbufsize )
CALL mpi_type_size ( MPI_INTEGER , itypesize , ierr )
!write(0,*)'B tag,size ',icurs,get_hdr_tag( bigbuf(icurs/inttypesize) ),get_hdr_rec_size( bigbuf(icurs/inttypesize) )
!write(0,*)' inttypesize ',inttypesize,' itypesize ',itypesize,' icurs/inttypesize ',icurs/inttypesize
!
!
! The I/O server "root" gets the request out of the next header and
! handles it by, in most cases, calling the appropriate external I/O package
! interface.
!
!
SELECT CASE ( get_hdr_tag( bigbuf(icurs/inttypesize) ) )
!
!
! The I/O server "root" handles the "noop" (do nothing) request. This is
! actually quite easy. "Noop" requests exist to help avoid race conditions.
! In some cases, only one compute task will everything about a request so
! other compute tasks send "noop" requests.
!
!
CASE ( int_noop )
!write(0,*)' int_noop '
CALL int_get_noop_header( bigbuf(icurs/inttypesize), hdrbufsize, itypesize )
icurs = icurs + hdrbufsize
!
!
! The I/O server "root" handles the "put_dom_td_real" request.
!
!
CASE ( int_dom_td_real )
!write(0,*)' int_dom_td_real '
CALL mpi_type_size( MPI_REAL, ftypesize, ierr )
ALLOCATE( RData( bigbuf(icurs/inttypesize + 4 ) ) ) ! 5 is the count of data items for this record ; defined in collect_on_comm.c
CALL int_get_td_header( bigbuf(icurs/inttypesize:), hdrbufsize, inttypesize, ftypesize, &
DataHandle, DateStr, Element, RData, Count, code )
icurs = icurs + hdrbufsize
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_put_dom_td_real( handle(DataHandle),TRIM(Element),TRIM(DateStr),RData, Count, Status )
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_put_dom_td_real( handle(DataHandle),TRIM(Element),TRIM(DateStr),RData, Count, Status )
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_put_dom_td_real( handle(DataHandle),TRIM(Element),TRIM(DateStr),RData, Count, Status )
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_put_dom_td_real( handle(DataHandle),TRIM(Element),TRIM(DateStr),RData, Count, Status )
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_put_dom_td_real( handle(DataHandle),TRIM(Element),TRIM(DateStr),RData, Count, Status )
#endif
CASE DEFAULT
Status = 0
END SELECT
DEALLOCATE( RData )
!
!
! The I/O server "root" handles the "put_dom_ti_real" request.
!
!
CASE ( int_dom_ti_real )
!write(0,*)' int_dom_ti_real '
CALL mpi_type_size( MPI_REAL, ftypesize, ierr )
ALLOCATE( RData( bigbuf(icurs/inttypesize + 4 ) ) ) ! 5 is the count of data items for this record ; defined in collect_on_comm.c
CALL int_get_ti_header( bigbuf(icurs/inttypesize:), hdrbufsize, inttypesize, ftypesize, &
DataHandle, Element, RData, Count, code )
icurs = icurs + hdrbufsize
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_put_dom_ti_real( handle(DataHandle),TRIM(Element), RData, Count, Status )
!write(0,*)'ext_ncd_put_dom_ti_real ',handle(DataHandle),TRIM(Element),RData,Status
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_put_dom_ti_real( handle(DataHandle),TRIM(Element), RData, Count, Status )
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_put_dom_ti_real( handle(DataHandle),TRIM(Element), RData, Count, Status )
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_put_dom_ti_real( handle(DataHandle),TRIM(Element), RData, Count, Status )
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_put_dom_ti_real( handle(DataHandle),TRIM(Element), RData, Count, Status )
#endif
CASE DEFAULT
Status = 0
END SELECT
DEALLOCATE( RData )
!
!
! The I/O server "root" handles the "put_dom_td_integer" request.
!
!
CASE ( int_dom_td_integer )
!write(0,*)' int_dom_td_integer '
CALL mpi_type_size( MPI_INTEGER, ftypesize, ierr )
ALLOCATE( IData( bigbuf(icurs/inttypesize + 4 ) ) ) ! 5 is the count of data items for this record ; defined in collect_on_comm.c
CALL int_get_td_header( bigbuf(icurs/inttypesize:), hdrbufsize, inttypesize, ftypesize, &
DataHandle, DateStr, Element, IData, Count, code )
icurs = icurs + hdrbufsize
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_put_dom_td_integer( handle(DataHandle),TRIM(Element), Trim(DateStr), IData, Count, Status )
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_put_dom_td_integer( handle(DataHandle),TRIM(Element), Trim(DateStr), IData, Count, Status )
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_put_dom_td_integer( handle(DataHandle),TRIM(Element), Trim(DateStr), IData, Count, Status )
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_put_dom_td_integer( handle(DataHandle),TRIM(Element), Trim(DateStr), IData, Count, Status )
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_put_dom_td_integer( handle(DataHandle),TRIM(Element), Trim(DateStr), IData, Count, Status )
#endif
CASE DEFAULT
Status = 0
END SELECT
DEALLOCATE( IData )
!
!
! The I/O server "root" handles the "put_dom_ti_integer" request.
!
!
CASE ( int_dom_ti_integer )
!write(0,*)' int_dom_ti_integer '
CALL mpi_type_size( MPI_INTEGER, ftypesize, ierr )
ALLOCATE( IData( bigbuf(icurs/inttypesize + 4 ) ) ) ! 5 is the count of data items for this record ; defined in collect_on_comm.c
CALL int_get_ti_header( bigbuf(icurs/inttypesize:), hdrbufsize, inttypesize, ftypesize, &
DataHandle, Element, IData, Count, code )
icurs = icurs + hdrbufsize
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_put_dom_ti_integer( handle(DataHandle),TRIM(Element), IData, Count, Status )
!write(0,*)'ext_ncd_put_dom_ti_integer ',handle(DataHandle),TRIM(Element),IData,Status
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_put_dom_ti_integer( handle(DataHandle),TRIM(Element), IData, Count, Status )
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_put_dom_ti_integer( handle(DataHandle),TRIM(Element), IData, Count, Status )
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_put_dom_ti_integer( handle(DataHandle),TRIM(Element), IData, Count, Status )
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_put_dom_ti_integer( handle(DataHandle),TRIM(Element), IData, Count, Status )
#endif
CASE DEFAULT
Status = 0
END SELECT
DEALLOCATE( IData)
!
!
! The I/O server "root" handles the "set_time" request.
!
!
CASE ( int_set_time )
!write(0,*)' int_set_time '
CALL int_get_ti_header_char( bigbuf(icurs/inttypesize), hdrbufsize, inttypesize, &
DataHandle, Element, VarName, CData, code )
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_set_time ( handle(DataHandle), TRIM(CData), Status)
#endif
CASE DEFAULT
Status = 0
END SELECT
icurs = icurs + hdrbufsize
!
!
! The I/O server "root" handles the "put_dom_ti_char" request.
!
!
CASE ( int_dom_ti_char )
!write(0,*)' int_dom_ti_char '
CALL int_get_ti_header_char( bigbuf(icurs/inttypesize), hdrbufsize, inttypesize, &
DataHandle, Element, VarName, CData, code )
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_put_dom_ti_char ( handle(DataHandle), TRIM(Element), TRIM(CData), Status)
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_put_dom_ti_char ( handle(DataHandle), TRIM(Element), TRIM(CData), Status)
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_put_dom_ti_char ( handle(DataHandle), TRIM(Element), TRIM(CData), Status)
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_put_dom_ti_char ( handle(DataHandle), TRIM(Element), TRIM(CData), Status)
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_put_dom_ti_char ( handle(DataHandle), TRIM(Element), TRIM(CData), Status)
#endif
CASE DEFAULT
Status = 0
END SELECT
icurs = icurs + hdrbufsize
!
!
! The I/O server "root" handles the "put_var_ti_char" request.
!
!
CASE ( int_var_ti_char )
!write(0,*)' int_var_ti_char '
CALL int_get_ti_header_char( bigbuf(icurs/inttypesize), hdrbufsize, inttypesize, &
DataHandle, Element, VarName, CData, code )
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_put_var_ti_char ( handle(DataHandle), TRIM(Element), TRIM(VarName), TRIM(CData), Status)
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_put_var_ti_char ( handle(DataHandle), TRIM(Element), TRIM(VarName), TRIM(CData), Status)
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_put_var_ti_char ( handle(DataHandle), TRIM(Element), TRIM(VarName), TRIM(CData), Status)
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_put_var_ti_char ( handle(DataHandle), TRIM(Element), TRIM(VarName), TRIM(CData), Status)
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_put_var_ti_char ( handle(DataHandle), TRIM(Element), TRIM(VarName), TRIM(CData), Status)
#endif
CASE DEFAULT
Status = 0
END SELECT
icurs = icurs + hdrbufsize
CASE ( int_ioexit )
! ioexit is now handled by sending negative message length to server
CALL wrf_error_fatal( &
"quilt: should have handled int_ioexit already")
!
!
! The I/O server "root" handles the "ioclose" request.
!
!
CASE ( int_ioclose )
!write(0,*)' int_ioclose '
CALL int_get_handle_header( bigbuf(icurs/inttypesize), hdrbufsize, itypesize, &
DataHandle , code )
icurs = icurs + hdrbufsize
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_FOR_WRITE .OR. fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_ncd_ioclose(handle(DataHandle),Status)
ENDIF
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_FOR_WRITE .OR. fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_int_ioclose(handle(DataHandle),Status)
ENDIF
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_FOR_WRITE .OR. fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_yyy_ioclose(handle(DataHandle),Status)
ENDIF
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_FOR_WRITE .OR. fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_gr1_ioclose(handle(DataHandle),Status)
ENDIF
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_FOR_WRITE .OR. fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_gr2_ioclose(handle(DataHandle),Status)
ENDIF
#endif
CASE DEFAULT
Status = 0
END SELECT
!
!
! The I/O server "root" handles the "open_for_write_begin" request.
!
!
CASE ( int_open_for_write_begin )
CALL int_get_ofwb_header( bigbuf(icurs/inttypesize), hdrbufsize, itypesize, &
FileName,SysDepInfo,io_form_arg,DataHandle )
!write(0,*)' int_open_for_write_begin inttypesize ',inttypesize,' itypesize ',itypesize
!write(0,*)' int_open_for_write_begin icurs ', icurs, hdrbufsize
!write(0,*)' int_open_for_write_begin FileName ',TRIM(FileName)
!write(0,*)' int_open_for_write_begin SysDepInfo ',TRIM(SysDepInfo)
icurs = icurs + hdrbufsize
!write(0,*)' int_open_for_write_begin new icurs,tag,size ', icurs, get_hdr_tag( bigbuf(icurs/inttypesize) ),get_hdr_rec_size( bigbuf(icurs/inttypesize) )
io_form(DataHandle) = io_form_arg
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_open_for_write_begin(FileName,Comm,IOComm,SysDepInfo,handle(DataHandle),Status)
!write(0,*)'ext_ncd_open_for_write_begin ',Trim(FileName),DataHandle,handle(DataHandle),Status
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_open_for_write_begin(FileName,Comm,IOComm,SysDepInfo,handle(DataHandle),Status)
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_open_for_write_begin(FileName,Comm,IOComm,SysDepInfo,handle(DataHandle),Status)
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_open_for_write_begin(FileName,Comm,IOComm,SysDepInfo,handle(DataHandle),Status)
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_open_for_write_begin(FileName,Comm,IOComm,SysDepInfo,handle(DataHandle),Status)
#endif
CASE DEFAULT
Status = 0
END SELECT
okay_to_write(DataHandle) = .false.
!
!
! The I/O server "root" handles the "open_for_write_commit" request.
! In this case, the "okay_to_commit" is simply set to .true. so "write_field"
! requests will initiate writes to disk. Actual commit will be done after
! all requests in this batch have been handled.
!
!
CASE ( int_open_for_write_commit )
CALL int_get_handle_header( bigbuf(icurs/inttypesize), hdrbufsize, itypesize, &
DataHandle , code )
!write(0,*)' int_open_for_write_commit icurs ', icurs, hdrbufsize
icurs = icurs + hdrbufsize
okay_to_commit(DataHandle) = .true.
!
!
! The I/O server "root" handles the "write_field" (int_field) request.
! If okay_to_write(DataHandle) is .true. then the patch in the
! header (bigbuf) is written to a globally-sized internal output buffer via
! the call to store_patch_in_outbuf(). Note that this is where the actual
! "quilting" (reassembly of patches onto a full-size domain) is done. If
! okay_to_write(DataHandle) is .false. then external I/O package interfaces
! are called to write metadata for I/O formats that support native metadata.
!
! NOTE that the I/O server "root" will only see write_field (int_field)
! requests AFTER an "iosync" request.
!
!
CASE ( int_field )
!write(0,*)' int_field '
CALL mpi_type_size( MPI_INTEGER, ftypesize, ierr )
CALL int_get_write_field_header ( bigbuf(icurs/inttypesize), hdrbufsize, itypesize, ftypesize, &
DataHandle , DateStr , VarName , Dummy , FieldType , Comm , IOComm, &
DomainDesc , MemoryOrder , Stagger , DimNames , &
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd )
icurs = icurs + hdrbufsize
IF ( okay_to_write(DataHandle) ) THEN
WRITE(*,*)'>>> ',TRIM(DateStr), ' ', TRIM(VarName), ' ', TRIM(MemoryOrder), ' ', &
(PatchEnd(1)-PatchStart(1)+1)*(PatchEnd(2)-PatchStart(2)+1)*(PatchEnd(3)-PatchStart(3)+1)
IF ( FieldType .EQ. WRF_REAL .OR. FieldType .EQ. WRF_DOUBLE) THEN
! Note that the WRF_DOUBLE branch of this IF statement must come first since
! WRF_REAL is set equal to WRF_DOUBLE during autopromotion builds.
IF ( FieldType .EQ. WRF_DOUBLE) THEN
! this branch has not been tested TBH: 20050406
CALL mpi_type_size( MPI_DOUBLE_PRECISION, ftypesize, ierr )
ELSE
CALL mpi_type_size( MPI_REAL, ftypesize, ierr )
ENDIF
stored_write_record = .true.
CALL store_patch_in_outbuf ( bigbuf(icurs/inttypesize), dummybuf, TRIM(DateStr), TRIM(VarName) , &
FieldType, TRIM(MemoryOrder), TRIM(Stagger), DimNames, &
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd )
ELSE IF ( FieldType .EQ. WRF_INTEGER ) THEN
CALL mpi_type_size( MPI_INTEGER, ftypesize, ierr )
stored_write_record = .true.
CALL store_patch_in_outbuf ( dummybuf, bigbuf(icurs/inttypesize), TRIM(DateStr), TRIM(VarName) , &
FieldType, TRIM(MemoryOrder), TRIM(Stagger), DimNames, &
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd )
ELSE IF ( FieldType .EQ. WRF_LOGICAL ) THEN
ftypesize = LWORDSIZE
ENDIF
icurs = icurs + (PatchEnd(1)-PatchStart(1)+1)*(PatchEnd(2)-PatchStart(2)+1)* &
(PatchEnd(3)-PatchStart(3)+1)*ftypesize
ELSE
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_write_field ( handle(DataHandle) , TRIM(DateStr) , &
TRIM(VarName) , dummy , FieldType , Comm , IOComm, &
DomainDesc , TRIM(MemoryOrder) , TRIM(Stagger) , DimNames , &
DomainStart , DomainEnd , &
DomainStart , DomainEnd , &
DomainStart , DomainEnd , &
Status )
#endif
#if 0
! since this is training and the grib output doesn't need training, disable this branch.
#ifdef YYY
CASE ( IO_YYY )
CALL ext_YYY_write_field ( handle(DataHandle) , TRIM(DateStr) , &
TRIM(VarName) , dummy , FieldType , Comm , IOComm, &
DomainDesc , TRIM(MemoryOrder) , TRIM(Stagger) , DimNames , &
DomainStart , DomainEnd , &
DomainStart , DomainEnd , &
DomainStart , DomainEnd , &
Status )
#endif
#endif
CASE DEFAULT
Status = 0
END SELECT
ENDIF
CASE ( int_iosync )
!write(0,*)' int_iosync '
CALL int_get_handle_header( bigbuf(icurs/inttypesize), hdrbufsize, itypesize, &
DataHandle , code )
icurs = icurs + hdrbufsize
CASE DEFAULT
WRITE(mess,*)'quilt: bad tag: ',get_hdr_tag( bigbuf(icurs/inttypesize) ),' icurs ',icurs/inttypesize
CALL wrf_error_fatal( mess )
END SELECT
ENDDO
!
!
! Now, the I/O server "root" has finshed handling all commands from the latest
! call to retrieve_pieces_of_field().
!
!
IF (stored_write_record) THEN
!write(0,*)'calling write_outbuf ',DataHandle
!
!
! If any fields have been stored in a globally-sized internal output buffer
! (via a call to store_patch_in_outbuf()) then call write_outbuf() to write
! them to disk now.
! NOTE that the I/O server "root" will only have called
! store_patch_in_outbuf() when handling write_field (int_field)
! commands which only arrive AFTER an "iosync" command.
!
!
CALL write_outbuf ( handle(DataHandle), use_package(io_form(DataHandle)))
!write(0,*)'back from write_outbuf ',DataHandle
ENDIF
!
!
! If one or more "open_for_write_commit" commands were encountered from the
! latest call to retrieve_pieces_of_field() then call the package-specific
! routine to do the commit.
!
!
IF (okay_to_commit(DataHandle)) THEN
SELECT CASE (use_package(io_form(DataHandle)))
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_inquire_filename( handle(DataHandle), fname, fstat, Status )
!write(0,*)'preparing to commit ', DataHandle, fstat, fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED
IF ( fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
!write(0,*)'calling ext_ncd_open_for_write_commit ', handle(DataHandle), DataHandle
CALL ext_ncd_open_for_write_commit(handle(DataHandle),Status)
!write(0,*)'back from ext_ncd_open_for_write_commit ', Status
okay_to_write(DataHandle) = .true.
ENDIF
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_int_open_for_write_commit(handle(DataHandle),Status)
okay_to_write(DataHandle) = .true.
ENDIF
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_yyy_open_for_write_commit(handle(DataHandle),Status)
okay_to_write(DataHandle) = .true.
ENDIF
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_gr1_open_for_write_commit(handle(DataHandle),Status)
okay_to_write(DataHandle) = .true.
ENDIF
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_inquire_filename( handle(DataHandle), fname, fstat, Status )
IF ( fstat .EQ. WRF_FILE_OPENED_NOT_COMMITTED ) THEN
CALL ext_gr2_open_for_write_commit(handle(DataHandle),Status)
okay_to_write(DataHandle) = .true.
ENDIF
#endif
CASE DEFAULT
Status = 0
END SELECT
okay_to_commit(DataHandle) = .false.
ENDIF
DEALLOCATE( bigbuf )
ENDIF
!
!
! Retrieve header and all patches for the next field from the internal
! buffers.
!
!
CALL retrieve_pieces_of_field ( obuf , VarName, obufsize, sz, retval )
!write(0,*)'calling next retrieve_pieces_of_field ',trim(VarName),obufsize,sz,retval
!
!
! Sum sizes of all headers and patches (data) for this field from all I/O
! servers in this I/O server group onto the I/O server "root".
!
!
CALL MPI_Reduce( sz, bigbufsize, 1, MPI_INTEGER, &
MPI_SUM, ntasks_local_group-1, &
mpi_comm_local, ierr )
!
!
! Then, return to the top of the loop to collect headers and data from all
! I/O servers in this I/O server group onto the I/O server "root" and handle
! the next batch of commands.
!
!
!write(0,*)'after MPI_Reduce ',sz, bigbufsize
END DO
DEALLOCATE( obuf )
! flush output files if needed
IF (stored_write_record) THEN
SELECT CASE ( use_package(io_form) )
#ifdef NETCDF
CASE ( IO_NETCDF )
CALL ext_ncd_iosync( handle(DataHandle), Status )
#endif
#ifdef XXX
CASE ( IO_XXX )
CALL ext_xxx_iosync( handle(DataHandle), Status )
#endif
#ifdef YYY
CASE ( IO_YYY )
CALL ext_yyy_iosync( handle(DataHandle), Status )
#endif
#ifdef ZZZ
CASE ( IO_ZZZ )
CALL ext_zzz_iosync( handle(DataHandle), Status )
#endif
#ifdef GRIB1
CASE ( IO_GRIB1 )
CALL ext_gr1_iosync( handle(DataHandle), Status )
#endif
#ifdef GRIB2
CASE ( IO_GRIB2 )
CALL ext_gr2_iosync( handle(DataHandle), Status )
#endif
#ifdef INTIO
CASE ( IO_INTIO )
CALL ext_int_iosync( handle(DataHandle), Status )
#endif
CASE DEFAULT
Status = 0
END SELECT
ENDIF
END DO
END SUBROUTINE quilt
! end of #endif of DM_PARALLEL
#endif
SUBROUTINE init_module_wrf_quilt
!
!
! Both client (compute) and server tasks call this routine to initialize the
! module. Routine setup_quilt_servers() is called from this routine to
! determine which tasks are compute tasks and which are server tasks. Server
! tasks then call routine quilt() and remain there for the rest of the model
! run. Compute tasks return from init_module_wrf_quilt() to perform model
! computations.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INCLUDE 'mpif.h'
INTEGER i
NAMELIST /namelist_quilt/ nio_tasks_per_group, nio_groups
INTEGER ntasks, mytask, ierr
LOGICAL mpi_inited
quilting_enabled = .FALSE.
IF ( disable_quilt ) RETURN
DO i = 1,int_num_handles
okay_to_write(i) = .FALSE.
int_handle_in_use(i) = .FALSE.
int_num_bytes_to_write(i) = 0
ENDDO
CALL MPI_INITIALIZED( mpi_inited, ierr )
IF ( mpi_inited ) THEN
CALL wrf_error_fatal("frame/module_io_quilt.F: quilt initialization must be called before MPI_Init") ;
ENDIF
CALL mpi_init ( ierr )
CALL wrf_set_dm_communicator( MPI_COMM_WORLD )
CALL wrf_termio_dup
CALL MPI_Comm_rank ( MPI_COMM_WORLD, mytask, ierr ) ;
CALL mpi_x_comm_size ( MPI_COMM_WORLD, ntasks, ierr ) ;
IF ( mytask .EQ. 0 ) THEN
OPEN ( unit=27, file="namelist.input", form="formatted", status="old" )
nio_groups = 1
nio_tasks_per_group = 0
READ ( 27 , namelist_quilt )
CLOSE ( 27 )
ENDIF
CALL mpi_bcast( nio_tasks_per_group , 1 , MPI_INTEGER , 0 , MPI_COMM_WORLD, ierr )
CALL mpi_bcast( nio_groups , 1 , MPI_INTEGER , 0 , MPI_COMM_WORLD, ierr )
CALL setup_quilt_servers( nio_tasks_per_group, &
mytask, &
ntasks, &
nio_groups, &
nio_tasks_in_group, &
MPI_COMM_WORLD, &
mpi_comm_local, &
mpi_comm_io_groups)
! provide the communicator for the integration tasks to RSL
IF ( mytask .lt. ncompute_tasks ) THEN
CALL wrf_set_dm_communicator( mpi_comm_local )
ELSE
CALL quilt ! will not return on io server tasks
ENDIF
#endif
RETURN
END SUBROUTINE init_module_wrf_quilt
END MODULE module_wrf_quilt
!
!
! Remaining routines in this file are defined outside of the module
! either to defeat arg/param type checking or to avoid an explicit use
! dependence.
!
!
SUBROUTINE disable_quilting
!
!
! Call this in programs that you never want to be quilting (e.g. real)
! Must call before call to init_module_wrf_quilt().
!
!
USE module_wrf_quilt
disable_quilt = .TRUE.
RETURN
END SUBROUTINE disable_quilting
LOGICAL FUNCTION use_output_servers()
!
!
! Returns .TRUE. if I/O quilt servers are in-use for write operations.
! This routine is called only by client (compute) tasks.
!
!
USE module_wrf_quilt
use_output_servers = quilting_enabled
RETURN
END FUNCTION use_output_servers
LOGICAL FUNCTION use_input_servers()
!
!
! Returns .TRUE. if I/O quilt servers are in-use for read operations.
! This routine is called only by client (compute) tasks.
!
!
USE module_wrf_quilt
use_input_servers = .FALSE.
RETURN
END FUNCTION use_input_servers
SUBROUTINE wrf_quilt_open_for_write_begin( FileName , Comm_compute, Comm_io, SysDepInfo, &
DataHandle , io_form_arg, Status )
!
!
! Instruct the I/O quilt servers to begin data definition ("training") phase
! for writing to WRF dataset FileName. io_form_arg indicates file format.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
CHARACTER *(*), INTENT(IN) :: FileName
INTEGER , INTENT(IN) :: Comm_compute , Comm_io
CHARACTER *(*), INTENT(IN) :: SysDepInfo
INTEGER , INTENT(OUT) :: DataHandle
INTEGER , INTENT(IN) :: io_form_arg
INTEGER , INTENT(OUT) :: Status
! Local
CHARACTER*132 :: locFileName, locSysDepInfo
INTEGER i, itypesize, tasks_in_group, ierr, comm_io_group
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
REAL dummy
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_open_for_write_begin' )
CALL int_get_fresh_handle(i)
okay_to_write(i) = .false.
DataHandle = i
locFileName = FileName
locSysDepInfo = SysDepInfo
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
IF ( wrf_dm_on_monitor() ) THEN
CALL int_gen_ofwb_header( hdrbuf, hdrbufsize, itypesize, &
locFileName,locSysDepInfo,io_form_arg,DataHandle )
ELSE
CALL int_gen_noop_header( hdrbuf, hdrbufsize, itypesize )
ENDIF
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_open_for_write_begin
SUBROUTINE wrf_quilt_open_for_write_commit( DataHandle , Status )
!
!
! Instruct the I/O quilt servers to switch an internal flag to enable output
! for the dataset referenced by DataHandle. The call to
! wrf_quilt_open_for_write_commit() must be paired with a call to
! wrf_quilt_open_for_write_begin().
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(IN ) :: DataHandle
INTEGER , INTENT(OUT) :: Status
INTEGER i, itypesize, tasks_in_group, ierr, comm_io_group
REAL dummy
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_open_for_write_commit' )
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
okay_to_write( DataHandle ) = .true.
ENDIF
ENDIF
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
CALL int_gen_handle_header( hdrbuf, hdrbufsize, itypesize, &
DataHandle, int_open_for_write_commit )
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_open_for_write_commit
SUBROUTINE wrf_quilt_open_for_read ( FileName , Comm_compute, Comm_io, SysDepInfo, &
DataHandle , Status )
!
!
! Instruct the I/O quilt servers to open WRF dataset FileName for reading.
! This routine is called only by client (compute) tasks.
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
CHARACTER *(*), INTENT(IN) :: FileName
INTEGER , INTENT(IN) :: Comm_compute , Comm_io
CHARACTER *(*), INTENT(IN) :: SysDepInfo
INTEGER , INTENT(OUT) :: DataHandle
INTEGER , INTENT(OUT) :: Status
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_open_for_read' )
DataHandle = -1
Status = -1
CALL wrf_error_fatal ( "frame/module_io_quilt.F: wrf_quilt_open_for_read not yet supported" )
#endif
RETURN
END SUBROUTINE wrf_quilt_open_for_read
SUBROUTINE wrf_quilt_inquire_opened ( DataHandle, FileName , FileStatus, Status )
!
!
! Inquire if the dataset referenced by DataHandle is open.
! Does not require communication with I/O servers.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
include 'wrf_io_flags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER *(*), INTENT(IN) :: FileName
INTEGER , INTENT(OUT) :: FileStatus
INTEGER , INTENT(OUT) :: Status
Status = 0
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_inquire_opened' )
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
IF ( okay_to_write( DataHandle ) ) THEN
FileStatus = WRF_FILE_OPENED_FOR_WRITE
ENDIF
ENDIF
ENDIF
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_inquire_opened
SUBROUTINE wrf_quilt_inquire_filename ( DataHandle, FileName , FileStatus, Status )
!
!
! Return the Filename and FileStatus associated with DataHandle.
! Does not require communication with I/O servers.
!
! Note that the current implementation does not actually return FileName.
! Currenlty, WRF does not use this returned value. Fixing this would simply
! require saving the file names on the client tasks in an array similar to
! okay_to_write().
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
include 'wrf_io_flags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER *(*), INTENT(OUT) :: FileName
INTEGER , INTENT(OUT) :: FileStatus
INTEGER , INTENT(OUT) :: Status
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_inquire_filename' )
Status = 0
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
IF ( okay_to_write( DataHandle ) ) THEN
FileStatus = WRF_FILE_OPENED_FOR_WRITE
ELSE
FileStatus = WRF_FILE_OPENED_NOT_COMMITTED
ENDIF
ELSE
FileStatus = WRF_FILE_NOT_OPENED
ENDIF
Status = 0
FileName = "bogusfornow"
ELSE
Status = -1
ENDIF
#endif
RETURN
END SUBROUTINE wrf_quilt_inquire_filename
SUBROUTINE wrf_quilt_iosync ( DataHandle, Status )
!
!
! Instruct the I/O quilt servers to synchronize the disk copy of a dataset
! with memory buffers.
!
! After the "iosync" header (request) is sent to the I/O quilt server,
! the compute tasks will then send the entire contents (headers and data) of
! int_local_output_buffer to their I/O quilt server. This communication is
! done in subroutine send_to_io_quilt_servers(). After the I/O quilt servers
! receive this data, they will write all accumulated fields to disk.
!
! Significant time may be required for the I/O quilt servers to organize
! fields and write them to disk. Therefore, the "iosync" request should be
! sent only when the compute tasks are ready to run for a while without
! needing to communicate with the servers. Otherwise, the compute tasks
! will end up waiting for the servers to finish writing to disk, thus wasting
! any performance benefits of having servers at all.
!
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && ! defined (STUBMPI)
USE module_wrf_quilt
IMPLICIT NONE
include "mpif.h"
INTEGER , INTENT(IN) :: DataHandle
INTEGER , INTENT(OUT) :: Status
INTEGER locsize , inttypesize
INTEGER ierr, tasks_in_group, comm_io_group, dummy, i
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_iosync' )
IF ( associated ( int_local_output_buffer ) ) THEN
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
locsize = int_num_bytes_to_write(DataHandle)
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( locsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
#ifdef DEREF_KLUDGE
CALL collect_on_comm( comm_io_group, &
onebyte, &
int_local_output_buffer(1), locsize , &
dummy, 0 )
#else
CALL collect_on_comm( comm_io_group, &
onebyte, &
int_local_output_buffer, locsize , &
dummy, 0 )
#endif
int_local_output_cursor = 1
! int_num_bytes_to_write(DataHandle) = 0
DEALLOCATE ( int_local_output_buffer )
NULLIFY ( int_local_output_buffer )
ELSE
CALL wrf_message ("frame/module_io_quilt.F: wrf_quilt_iosync: no buffer allocated")
ENDIF
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_iosync
SUBROUTINE wrf_quilt_ioclose ( DataHandle, Status )
!
!
! Instruct the I/O quilt servers to close the dataset referenced by
! DataHandle.
! This routine also clears the client file handle and, if needed, deallocates
! int_local_output_buffer.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && ! defined( STUBMPI)
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(IN) :: DataHandle
INTEGER , INTENT(OUT) :: Status
INTEGER i, itypesize, tasks_in_group, comm_io_group, ierr
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
REAL dummy
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_ioclose' )
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
IF ( wrf_dm_on_monitor() ) THEN
CALL int_gen_handle_header( hdrbuf, hdrbufsize, itypesize, &
DataHandle , int_ioclose )
ELSE
CALL int_gen_noop_header( hdrbuf, hdrbufsize, itypesize )
ENDIF
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
int_handle_in_use(DataHandle) = .false.
okay_to_write(DataHandle) = .false.
okay_to_commit(DataHandle) = .false.
int_local_output_cursor = 1
int_num_bytes_to_write(DataHandle) = 0
IF ( associated ( int_local_output_buffer ) ) THEN
DEALLOCATE ( int_local_output_buffer )
NULLIFY ( int_local_output_buffer )
ENDIF
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_ioclose
SUBROUTINE wrf_quilt_ioexit( Status )
!
!
! Instruct the I/O quilt servers to shut down the WRF I/O system.
! Do not call any wrf_quilt_*() routines after this routine has been called.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && ! defined (STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(OUT) :: Status
INTEGER :: DataHandle
INTEGER i, itypesize, tasks_in_group, comm_io_group, ierr
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
REAL dummy
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_ioexit' )
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
IF ( wrf_dm_on_monitor() ) THEN
CALL int_gen_handle_header( hdrbuf, hdrbufsize, itypesize, &
DataHandle , int_ioexit ) ! Handle is dummy
ELSE
CALL int_gen_noop_header( hdrbuf, hdrbufsize, itypesize )
ENDIF
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! BY SENDING A NEGATIVE SIZE WE GET THE SERVERS TO SHUT DOWN
hdrbufsize = -100
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
Status = 0
#endif
RETURN
END SUBROUTINE
SUBROUTINE wrf_quilt_get_next_time ( DataHandle, DateStr, Status )
!
!
! Instruct the I/O quilt servers to return the next time stamp.
! This is not yet supported.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && ! defined (STUBMPI)
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) :: DateStr
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_next_time
SUBROUTINE wrf_quilt_get_previous_time ( DataHandle, DateStr, Status )
!
!
! Instruct the I/O quilt servers to return the previous time stamp.
! This is not yet supported.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && ! defined (STUBMPI)
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) :: DateStr
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_previous_time
SUBROUTINE wrf_quilt_set_time ( DataHandle, Data, Status )
!
!
! Instruct the I/O quilt servers to set the time stamp in the dataset
! referenced by DataHandle.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Data
INTEGER :: Status
INTEGER i, itypesize, tasks_in_group, ierr, comm_io_group
REAL dummy
INTEGER :: Count
!
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_set_time' )
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
Count = 0 ! there is no count for character strings
CALL int_gen_ti_header_char( hdrbuf, hdrbufsize, itypesize, &
DataHandle, "TIMESTAMP", "", Data, int_set_time )
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
ENDIF
ENDIF
#endif
RETURN
END SUBROUTINE wrf_quilt_set_time
SUBROUTINE wrf_quilt_get_next_var ( DataHandle, VarName, Status )
!
!
! When reading, instruct the I/O quilt servers to return the name of the next
! variable in the current time frame.
! This is not yet supported.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) :: VarName
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_next_var
SUBROUTINE wrf_quilt_get_dom_ti_real ( DataHandle,Element, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent domain metadata named "Element"
! from the open dataset described by DataHandle.
! Metadata of type real are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
REAL, INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Outcount
INTEGER :: Status
CALL wrf_message('wrf_quilt_get_dom_ti_real not supported yet')
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_ti_real
SUBROUTINE wrf_quilt_put_dom_ti_real ( DataHandle,Element, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! domain metadata named "Element"
! to the open dataset described by DataHandle.
! Metadata of type real are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
real , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
!Local
CHARACTER*132 :: locElement
INTEGER i, typesize, itypesize, tasks_in_group, ierr, comm_io_group
REAL dummy
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
!
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_put_dom_ti_real' )
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
locElement = Element
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
CALL MPI_TYPE_SIZE( MPI_REAL, typesize, ierr )
IF ( wrf_dm_on_monitor() ) THEN
CALL int_gen_ti_header( hdrbuf, hdrbufsize, itypesize, typesize, &
DataHandle, locElement, Data, Count, int_dom_ti_real )
ELSE
CALL int_gen_noop_header( hdrbuf, hdrbufsize, itypesize )
ENDIF
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
ENDIF
ENDIF
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_ti_real
SUBROUTINE wrf_quilt_get_dom_ti_double ( DataHandle,Element, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent domain metadata named "Element"
! from the open dataset described by DataHandle.
! Metadata of type double are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
real*8 :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
CALL wrf_error_fatal('wrf_quilt_get_dom_ti_double not supported yet')
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_ti_double
SUBROUTINE wrf_quilt_put_dom_ti_double ( DataHandle,Element, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! domain metadata named "Element"
! to the open dataset described by DataHandle.
! Metadata of type double are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
real*8 , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
CALL wrf_error_fatal('wrf_quilt_put_dom_ti_double not supported yet')
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_ti_double
SUBROUTINE wrf_quilt_get_dom_ti_integer ( DataHandle,Element, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent domain metadata named "Element"
! from the open dataset described by DataHandle.
! Metadata of type integer are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
integer :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
CALL wrf_message('wrf_quilt_get_dom_ti_integer not supported yet')
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_ti_integer
SUBROUTINE wrf_quilt_put_dom_ti_integer ( DataHandle,Element, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! domain metadata named "Element"
! to the open dataset described by DataHandle.
! Metadata of type integer are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
INTEGER , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
! Local
CHARACTER*132 :: locElement
INTEGER i, typesize, itypesize, tasks_in_group, ierr, comm_io_group
REAL dummy
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
!
locElement = Element
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_put_dom_ti_integer' )
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
CALL MPI_TYPE_SIZE( MPI_INTEGER, typesize, ierr )
IF ( wrf_dm_on_monitor() ) THEN
CALL int_gen_ti_header( hdrbuf, hdrbufsize, itypesize, typesize, &
DataHandle, locElement, Data, Count, int_dom_ti_integer )
ELSE
CALL int_gen_noop_header( hdrbuf, hdrbufsize, itypesize )
ENDIF
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
ENDIF
ENDIF
CALL wrf_debug ( DEBUG_LVL, 'returning from wrf_quilt_put_dom_ti_integer' )
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_ti_integer
SUBROUTINE wrf_quilt_get_dom_ti_logical ( DataHandle,Element, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent domain metadata named "Element"
! from the open dataset described by DataHandle.
! Metadata of type logical are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
logical :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
CALL wrf_message('wrf_quilt_get_dom_ti_logical not supported yet')
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_ti_logical
SUBROUTINE wrf_quilt_put_dom_ti_logical ( DataHandle,Element, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! domain metadata named "Element"
! to the open dataset described by DataHandle.
! Metadata of type logical are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
logical , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
CALL wrf_message('wrf_quilt_put_dom_ti_logical not supported yet')
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_ti_logical
SUBROUTINE wrf_quilt_get_dom_ti_char ( DataHandle,Element, Data, Status )
!
!
! Instruct the I/O quilt servers to attempt to read time independent
! domain metadata named "Element"
! from the open dataset described by DataHandle.
! Metadata of type char are
! stored in string Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) :: Data
INTEGER :: Status
CALL wrf_message('wrf_quilt_get_dom_ti_char not supported yet')
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_ti_char
SUBROUTINE wrf_quilt_put_dom_ti_char ( DataHandle, Element, Data, Status )
!
!
! Instruct the I/O quilt servers to write time independent
! domain metadata named "Element"
! to the open dataset described by DataHandle.
! Metadata of type char are
! copied from string Data.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: Data
INTEGER :: Status
INTEGER i, itypesize, tasks_in_group, ierr, comm_io_group
REAL dummy
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
!
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_put_dom_ti_char' )
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
IF ( wrf_dm_on_monitor() ) THEN
CALL int_gen_ti_header_char( hdrbuf, hdrbufsize, itypesize, &
DataHandle, Element, "", Data, int_dom_ti_char )
ELSE
CALL int_gen_noop_header( hdrbuf, hdrbufsize, itypesize )
ENDIF
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
ENDIF
ENDIF
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_ti_char
SUBROUTINE wrf_quilt_get_dom_td_real ( DataHandle,Element, DateStr, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent domain metadata named "Element" valid at time DateStr
! from the open dataset described by DataHandle.
! Metadata of type real are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
real :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_td_real
SUBROUTINE wrf_quilt_put_dom_td_real ( DataHandle,Element, DateStr, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! domain metadata named "Element" valid at time DateStr
! to the open dataset described by DataHandle.
! Metadata of type real are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
real , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_td_real
SUBROUTINE wrf_quilt_get_dom_td_double ( DataHandle,Element, DateStr, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent domain metadata named "Element" valid at time DateStr
! from the open dataset described by DataHandle.
! Metadata of type double are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
real*8 :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
CALL wrf_error_fatal('wrf_quilt_get_dom_td_double not supported yet')
RETURN
END SUBROUTINE wrf_quilt_get_dom_td_double
SUBROUTINE wrf_quilt_put_dom_td_double ( DataHandle,Element, DateStr, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! domain metadata named "Element" valid at time DateStr
! to the open dataset described by DataHandle.
! Metadata of type double are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
real*8 , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
CALL wrf_error_fatal('wrf_quilt_put_dom_td_double not supported yet')
RETURN
END SUBROUTINE wrf_quilt_put_dom_td_double
SUBROUTINE wrf_quilt_get_dom_td_integer ( DataHandle,Element, DateStr, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent domain metadata named "Element" valid at time DateStr
! from the open dataset described by DataHandle.
! Metadata of type integer are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
integer :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_td_integer
SUBROUTINE wrf_quilt_put_dom_td_integer ( DataHandle,Element, DateStr, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! domain metadata named "Element" valid at time DateStr
! to the open dataset described by DataHandle.
! Metadata of type integer are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
integer , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_td_integer
SUBROUTINE wrf_quilt_get_dom_td_logical ( DataHandle,Element, DateStr, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent domain metadata named "Element" valid at time DateStr
! from the open dataset described by DataHandle.
! Metadata of type logical are
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
logical :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_td_logical
SUBROUTINE wrf_quilt_put_dom_td_logical ( DataHandle,Element, DateStr, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! domain metadata named "Element" valid at time DateStr
! to the open dataset described by DataHandle.
! Metadata of type logical are
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
logical , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_td_logical
SUBROUTINE wrf_quilt_get_dom_td_char ( DataHandle,Element, DateStr, Data, Status )
!
!
! Instruct the I/O quilt servers to attempt to read time dependent
! domain metadata named "Element" valid at time DateStr
! from the open dataset described by DataHandle.
! Metadata of type char are
! stored in string Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) :: Data
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_dom_td_char
SUBROUTINE wrf_quilt_put_dom_td_char ( DataHandle,Element, DateStr, Data, Status )
!
!
! Instruct $he I/O quilt servers to write time dependent
! domain metadata named "Element" valid at time DateStr
! to the open dataset described by DataHandle.
! Metadata of type char are
! copied from string Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: Data
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_dom_td_char
SUBROUTINE wrf_quilt_get_var_ti_real ( DataHandle,Element, Varname, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent attribute "Element" of variable "Varname"
! from the open dataset described by DataHandle.
! Attribute of type real is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
real :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_ti_real
SUBROUTINE wrf_quilt_put_var_ti_real ( DataHandle,Element, Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! attribute "Element" of variable "Varname"
! to the open dataset described by DataHandle.
! Attribute of type real is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
real , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_ti_real
SUBROUTINE wrf_quilt_get_var_ti_double ( DataHandle,Element, Varname, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent attribute "Element" of variable "Varname"
! from the open dataset described by DataHandle.
! Attribute of type double is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
real*8 :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
CALL wrf_error_fatal('wrf_quilt_get_var_ti_double not supported yet')
RETURN
END SUBROUTINE wrf_quilt_get_var_ti_double
SUBROUTINE wrf_quilt_put_var_ti_double ( DataHandle,Element, Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! attribute "Element" of variable "Varname"
! to the open dataset described by DataHandle.
! Attribute of type double is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
real*8 , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
CALL wrf_error_fatal('wrf_quilt_put_var_ti_double not supported yet')
RETURN
END SUBROUTINE wrf_quilt_put_var_ti_double
SUBROUTINE wrf_quilt_get_var_ti_integer ( DataHandle,Element, Varname, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent attribute "Element" of variable "Varname"
! from the open dataset described by DataHandle.
! Attribute of type integer is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
integer :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_ti_integer
SUBROUTINE wrf_quilt_put_var_ti_integer ( DataHandle,Element, Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! attribute "Element" of variable "Varname"
! to the open dataset described by DataHandle.
! Attribute of type integer is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
integer , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_ti_integer
SUBROUTINE wrf_quilt_get_var_ti_logical ( DataHandle,Element, Varname, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! independent attribute "Element" of variable "Varname"
! from the open dataset described by DataHandle.
! Attribute of type logical is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
logical :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_ti_logical
SUBROUTINE wrf_quilt_put_var_ti_logical ( DataHandle,Element, Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time independent
! attribute "Element" of variable "Varname"
! to the open dataset described by DataHandle.
! Attribute of type logical is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
logical , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_ti_logical
SUBROUTINE wrf_quilt_get_var_ti_char ( DataHandle,Element, Varname, Data, Status )
!
!
! Instruct the I/O quilt servers to attempt to read time independent
! attribute "Element" of variable "Varname"
! from the open dataset described by DataHandle.
! Attribute of type char is
! stored in string Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
CHARACTER*(*) :: Data
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_ti_char
SUBROUTINE wrf_quilt_put_var_ti_char ( DataHandle,Element, Varname, Data, Status )
!
!
! Instruct the I/O quilt servers to write time independent
! attribute "Element" of variable "Varname"
! to the open dataset described by DataHandle.
! Attribute of type char is
! copied from string Data.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INCLUDE 'mpif.h'
INCLUDE 'intio_tags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: VarName
CHARACTER*(*) , INTENT(IN) :: Data
INTEGER :: Status
INTEGER i, itypesize, tasks_in_group, ierr, comm_io_group
REAL dummy
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
!
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_put_var_ti_char' )
IF ( DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles ) THEN
IF ( int_handle_in_use( DataHandle ) ) THEN
CALL MPI_TYPE_SIZE( MPI_INTEGER, itypesize, ierr )
IF ( wrf_dm_on_monitor() ) THEN
CALL int_gen_ti_header_char( hdrbuf, hdrbufsize, itypesize, &
DataHandle, TRIM(Element), TRIM(VarName), TRIM(Data), int_var_ti_char )
ELSE
CALL int_gen_noop_header( hdrbuf, hdrbufsize, itypesize )
ENDIF
iserver = 1 ! only one server group for now
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
ENDIF
ENDIF
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_ti_char
SUBROUTINE wrf_quilt_get_var_td_real ( DataHandle,Element, DateStr,Varname, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent attribute "Element" of variable "Varname" valid at time DateStr
! from the open dataset described by DataHandle.
! Attribute of type real is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
real :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_td_real
SUBROUTINE wrf_quilt_put_var_td_real ( DataHandle,Element, DateStr,Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! attribute "Element" of variable "Varname" valid at time DateStr
! to the open dataset described by DataHandle.
! Attribute of type real is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
real , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_td_real
SUBROUTINE wrf_quilt_get_var_td_double ( DataHandle,Element, DateStr,Varname, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent attribute "Element" of variable "Varname" valid at time DateStr
! from the open dataset described by DataHandle.
! Attribute of type double is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
real*8 :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
CALL wrf_error_fatal('wrf_quilt_get_var_td_double not supported yet')
RETURN
END SUBROUTINE wrf_quilt_get_var_td_double
SUBROUTINE wrf_quilt_put_var_td_double ( DataHandle,Element, DateStr,Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! attribute "Element" of variable "Varname" valid at time DateStr
! to the open dataset described by DataHandle.
! Attribute of type double is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
real*8 , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
CALL wrf_error_fatal('wrf_quilt_put_var_td_double not supported yet')
RETURN
END SUBROUTINE wrf_quilt_put_var_td_double
SUBROUTINE wrf_quilt_get_var_td_integer ( DataHandle,Element, DateStr,Varname, Data, Count, Outcount,Status)
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent attribute "Element" of variable "Varname" valid at time DateStr
! from the open dataset described by DataHandle.
! Attribute of type integer is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
integer :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_td_integer
SUBROUTINE wrf_quilt_put_var_td_integer ( DataHandle,Element, DateStr,Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! attribute "Element" of variable "Varname" valid at time DateStr
! to the open dataset described by DataHandle.
! Attribute of type integer is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
integer , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_td_integer
SUBROUTINE wrf_quilt_get_var_td_logical ( DataHandle,Element, DateStr,Varname, Data, Count, Outcount, Status )
!
!
! Instruct the I/O quilt servers to attempt to read Count words of time
! dependent attribute "Element" of variable "Varname" valid at time DateStr
! from the open dataset described by DataHandle.
! Attribute of type logical is
! stored in array Data.
! Actual number of words read is returned in OutCount.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
logical :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: OutCount
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_td_logical
SUBROUTINE wrf_quilt_put_var_td_logical ( DataHandle,Element, DateStr,Varname, Data, Count, Status )
!
!
! Instruct the I/O quilt servers to write Count words of time dependent
! attribute "Element" of variable "Varname" valid at time DateStr
! to the open dataset described by DataHandle.
! Attribute of type logical is
! copied from array Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
logical , INTENT(IN) :: Data(*)
INTEGER , INTENT(IN) :: Count
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_td_logical
SUBROUTINE wrf_quilt_get_var_td_char ( DataHandle,Element, DateStr,Varname, Data, Status )
!
!
! Instruct the I/O quilt servers to attempt to read time dependent
! attribute "Element" of variable "Varname" valid at time DateStr
! from the open dataset described by DataHandle.
! Attribute of type char is
! stored in string Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
CHARACTER*(*) :: Data
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_td_char
SUBROUTINE wrf_quilt_put_var_td_char ( DataHandle,Element, DateStr,Varname, Data, Status )
!
!
! Instruct the I/O quilt servers to write time dependent
! attribute "Element" of variable "Varname" valid at time DateStr
! to the open dataset described by DataHandle.
! Attribute of type char is
! copied from string Data.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: Element
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
CHARACTER*(*) , INTENT(IN) :: Data
INTEGER :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_put_var_td_char
SUBROUTINE wrf_quilt_read_field ( DataHandle , DateStr , VarName , Field , FieldType , Comm , IOComm, &
DomainDesc , MemoryOrder , Stagger , DimNames , &
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd , &
Status )
!
!
! Instruct the I/O quilt servers to read the variable named VarName from the
! dataset pointed to by DataHandle.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(INOUT) :: DateStr
CHARACTER*(*) , INTENT(INOUT) :: VarName
INTEGER , INTENT(INOUT) :: Field(*)
integer ,intent(in) :: FieldType
integer ,intent(inout) :: Comm
integer ,intent(inout) :: IOComm
integer ,intent(in) :: DomainDesc
character*(*) ,intent(in) :: MemoryOrder
character*(*) ,intent(in) :: Stagger
character*(*) , dimension (*) ,intent(in) :: DimNames
integer ,dimension(*) ,intent(in) :: DomainStart, DomainEnd
integer ,dimension(*) ,intent(in) :: MemoryStart, MemoryEnd
integer ,dimension(*) ,intent(in) :: PatchStart, PatchEnd
integer ,intent(out) :: Status
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_read_field
SUBROUTINE wrf_quilt_write_field ( DataHandle , DateStr , VarName , Field , FieldType , Comm , IOComm, &
DomainDesc , MemoryOrder , Stagger , DimNames , &
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd , &
Status )
!
!
! Prepare instructions for the I/O quilt servers to write the variable named
! VarName to the dataset pointed to by DataHandle.
!
! During a "training" write this routine accumulates number and sizes of
! messages that will be sent to the I/O server associated with this compute
! (client) task.
!
! During a "real" write, this routine begins by allocating
! int_local_output_buffer if it has not already been allocated. Sizes
! accumulated during "training" are used to determine how big
! int_local_output_buffer must be. This routine then stores "int_field"
! headers and associated field data in int_local_output_buffer. The contents
! of int_local_output_buffer are actually sent to the I/O quilt server in
! routine wrf_quilt_iosync(). This scheme allows output of multiple variables
! to be aggregated into a single "iosync" operation.
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_state_description
USE module_wrf_quilt
IMPLICIT NONE
include 'mpif.h'
include 'wrf_io_flags.h'
INTEGER , INTENT(IN) :: DataHandle
CHARACTER*(*) , INTENT(IN) :: DateStr
CHARACTER*(*) , INTENT(IN) :: VarName
! INTEGER , INTENT(IN) :: Field(*)
integer ,intent(in) :: FieldType
integer ,intent(inout) :: Comm
integer ,intent(inout) :: IOComm
integer ,intent(in) :: DomainDesc
character*(*) ,intent(in) :: MemoryOrder
character*(*) ,intent(in) :: Stagger
character*(*) , dimension (*) ,intent(in) :: DimNames
integer ,dimension(*) ,intent(in) :: DomainStart, DomainEnd
integer ,dimension(*) ,intent(in) :: MemoryStart, MemoryEnd
integer ,dimension(*) ,intent(in) :: PatchStart, PatchEnd
integer ,intent(out) :: Status
integer ii,jj,kk,myrank
REAL, DIMENSION( MemoryStart(1):MemoryEnd(1), &
MemoryStart(2):MemoryEnd(2), &
MemoryStart(3):MemoryEnd(3) ) :: Field
INTEGER locsize , typesize, inttypesize
INTEGER ierr, tasks_in_group, comm_io_group, dummy, i
LOGICAL, EXTERNAL :: wrf_dm_on_monitor
INTEGER, EXTERNAL :: use_package
CALL wrf_debug ( DEBUG_LVL, 'in wrf_quilt_write_field' )
IF ( .NOT. (DataHandle .GE. 1 .AND. DataHandle .LE. int_num_handles) ) THEN
CALL wrf_error_fatal("frame/module_io_quilt.F: wrf_quilt_write_field: invalid data handle" )
ENDIF
IF ( .NOT. int_handle_in_use( DataHandle ) ) THEN
CALL wrf_error_fatal("frame/module_io_quilt.F: wrf_quilt_write_field: DataHandle not opened" )
ENDIF
locsize = (PatchEnd(1)-PatchStart(1)+1)* &
(PatchEnd(2)-PatchStart(2)+1)* &
(PatchEnd(3)-PatchStart(3)+1)
CALL mpi_type_size( MPI_INTEGER, inttypesize, ierr )
! Note that the WRF_DOUBLE branch of this IF statement must come first since
! WRF_REAL is set equal to WRF_DOUBLE during autopromotion builds.
IF ( FieldType .EQ. WRF_DOUBLE ) THEN
CALL mpi_type_size( MPI_DOUBLE_PRECISION, typesize, ierr )
ELSE IF ( FieldType .EQ. WRF_REAL ) THEN
CALL mpi_type_size( MPI_REAL, typesize, ierr )
ELSE IF ( FieldType .EQ. WRF_INTEGER ) THEN
CALL mpi_type_size( MPI_INTEGER, typesize, ierr )
ELSE IF ( FieldType .EQ. WRF_LOGICAL ) THEN
CALL mpi_type_size( MPI_LOGICAL, typesize, ierr )
ENDIF
IF ( .NOT. okay_to_write( DataHandle ) ) THEN
! This is a "training" write.
! it is not okay to actually write; what we do here is just "bookkeep": count up
! the number and size of messages that we will output to io server associated with
! this task
CALL int_gen_write_field_header ( hdrbuf, hdrbufsize, inttypesize, typesize, &
DataHandle , DateStr , VarName , Field , FieldType , Comm , IOComm, &
333933 , MemoryOrder , Stagger , DimNames , & ! 333933 means training; magic number
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd )
int_num_bytes_to_write(DataHandle) = int_num_bytes_to_write(DataHandle) + locsize * typesize + hdrbufsize
! Send the hdr for the write in case the interface is calling the I/O API in "learn" mode
iserver = 1
CALL get_mpi_comm_io_groups( comm_io_group , iserver )
! send the size of my local buffer to the i/o task (obufsize doesnt mean anything here)
CALL mpi_x_comm_size( comm_io_group , tasks_in_group , ierr )
IF ( .NOT. wrf_dm_on_monitor() ) THEN ! only one task in compute grid sends this message; send noops on others
CALL int_gen_noop_header( hdrbuf, hdrbufsize, inttypesize )
ENDIF
CALL MPI_Reduce( hdrbufsize, obufsize, 1, MPI_INTEGER, &
MPI_SUM, tasks_in_group-1, & ! root = nio_tasks_in_group-1 is me
comm_io_group, ierr )
! send data to the i/o processor
CALL collect_on_comm( comm_io_group, &
onebyte, &
hdrbuf, hdrbufsize , &
dummy, 0 )
ELSE
IF ( .NOT. associated( int_local_output_buffer ) ) THEN
ALLOCATE ( int_local_output_buffer( (int_num_bytes_to_write( DataHandle )+1)/inttypesize ) )
int_local_output_cursor = 1
ENDIF
! This is NOT a "training" write. It is OK to write now.
CALL int_gen_write_field_header ( hdrbuf, hdrbufsize, inttypesize, typesize, &
DataHandle , DateStr , VarName , Field , FieldType , Comm , IOComm, &
0 , MemoryOrder , Stagger , DimNames , & ! non-333933 means okay to write; magic number
DomainStart , DomainEnd , &
MemoryStart , MemoryEnd , &
PatchStart , PatchEnd )
! Pack header into int_local_output_buffer. It will be sent to the
! I/O servers during the next "iosync" operation.
#ifdef DEREF_KLUDGE
CALL int_pack_data ( hdrbuf , hdrbufsize , int_local_output_buffer(1), int_local_output_cursor )
#else
CALL int_pack_data ( hdrbuf , hdrbufsize , int_local_output_buffer, int_local_output_cursor )
#endif
! Pack field data into int_local_output_buffer. It will be sent to the
! I/O servers during the next "iosync" operation.
#ifdef DEREF_KLUDGE
CALL int_pack_data ( Field(PatchStart(1):PatchEnd(1),PatchStart(2):PatchEnd(2),PatchStart(3):PatchEnd(3) ), &
locsize * typesize , int_local_output_buffer(1), int_local_output_cursor )
#else
CALL int_pack_data ( Field(PatchStart(1):PatchEnd(1),PatchStart(2):PatchEnd(2),PatchStart(3):PatchEnd(3) ), &
locsize * typesize , int_local_output_buffer, int_local_output_cursor )
#endif
ENDIF
Status = 0
#endif
RETURN
END SUBROUTINE wrf_quilt_write_field
SUBROUTINE wrf_quilt_get_var_info ( DataHandle , VarName , NDim , MemoryOrder , Stagger , &
DomainStart , DomainEnd , Status )
!
!
! This routine applies only to a dataset that is open for read. It instructs
! the I/O quilt servers to return information about variable VarName.
! This routine is called only by client (compute) tasks.
!
! This is not yet supported.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
IMPLICIT NONE
integer ,intent(in) :: DataHandle
character*(*) ,intent(in) :: VarName
integer :: NDim
character*(*) :: MemoryOrder
character*(*) :: Stagger
integer ,dimension(*) :: DomainStart, DomainEnd
integer :: Status
#endif
RETURN
END SUBROUTINE wrf_quilt_get_var_info
SUBROUTINE get_mpi_comm_io_groups( retval, isrvr )
!
!
! This routine returns the compute+io communicator to which this
! compute task belongs for I/O server group "isrvr".
! This routine is called only by client (compute) tasks.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INTEGER, INTENT(IN ) :: isrvr
INTEGER, INTENT(OUT) :: retval
retval = mpi_comm_io_groups(isrvr)
#endif
RETURN
END SUBROUTINE get_mpi_comm_io_groups
SUBROUTINE get_nio_tasks_in_group( retval )
!
!
! This routine returns the number of I/O server tasks in each
! I/O server group. It can be called by both clients and
! servers.
!
!
#if defined( DM_PARALLEL ) && !defined( STUBMPI )
USE module_wrf_quilt
IMPLICIT NONE
INTEGER, INTENT(OUT) :: retval
retval = nio_tasks_in_group
#endif
RETURN
END SUBROUTINE get_nio_tasks_in_group