!IDEAL:MODEL_LAYER:INITIALIZATION
!
! This MODULE holds the routines which are used to perform various initializations
! for the individual domains.
! This MODULE CONTAINS the following routines:
! initialize_field_test - 1. Set different fields to different constant
! values. This is only a test. If the correct
! domain is not found (based upon the "id")
! then a fatal error is issued.
!-----------------------------------------------------------------------
MODULE module_initialize 6
USE module_domain
USE module_io_domain
USE module_state_description
USE module_model_constants
USE module_bc
USE module_timing
USE module_configure
USE module_init_utilities
#ifdef DM_PARALLEL
USE module_dm
#endif
CONTAINS
!-------------------------------------------------------------------
! this is a wrapper for the solver-specific init_domain routines.
! Also dereferences the grid variables and passes them down as arguments.
! This is crucial, since the lower level routines may do message passing
! and this will get fouled up on machines that insist on passing down
! copies of assumed-shape arrays (by passing down as arguments, the
! data are treated as assumed-size -- ie. f77 -- arrays and the copying
! business is avoided). Fie on the F90 designers. Fie and a pox.
SUBROUTINE init_domain ( grid ) 4,21
IMPLICIT NONE
! Input data.
TYPE (domain), POINTER :: grid
! Local data.
INTEGER :: dyn_opt
INTEGER :: idum1, idum2
#ifdef DEREF_KLUDGE
INTEGER :: sm31 , em31 , sm32 , em32 , sm33 , em33
#endif
#ifdef DEREF_KLUDGE
sm31 = grid%sm31
em31 = grid%em31
sm32 = grid%sm32
em32 = grid%em32
sm33 = grid%sm33
em33 = grid%em33
#endif
CALL get_dyn_opt( dyn_opt )
CALL set_scalar_indices_from_config ( head_grid%id , idum1, idum2 )
IF ( dyn_opt .eq. 1 &
.or. dyn_opt .eq. 2 &
.or. dyn_opt .eq. 3 &
) THEN
CALL init_domain_rk( grid, &
!
#include <em_actual_args.inc>
!
)
ELSE
WRITE(0,*)' init_domain: unknown or unimplemented dyn_opt = ',dyn_opt
STOP
ENDIF
END SUBROUTINE init_domain
!-------------------------------------------------------------------
SUBROUTINE init_domain_rk ( grid, & 7,143
!
# include <em_dummy_args.inc>
!
)
IMPLICIT NONE
! Input data.
TYPE (domain), POINTER :: grid
# include <em_dummy_decl.inc>
TYPE (grid_config_rec_type) :: config_flags
! Local data
INTEGER :: &
ids, ide, jds, jde, kds, kde, &
ims, ime, jms, jme, kms, kme, &
its, ite, jts, jte, kts, kte, &
i, j, k
! Local data
INTEGER, PARAMETER :: nl_max = 1000
REAL, DIMENSION(nl_max) :: zk, p_in, theta, rho, u, v, qv, pd_in
INTEGER :: nl_in
INTEGER :: icm,jcm, ii, im1, jj, jm1, loop, error, fid, nxc, nyc
REAL :: u_mean,v_mean, f0, p_surf, p_level, qvf, z_at_v, z_at_u
REAL :: z_scale, xrad, yrad, zrad, rad, delt, cof1, cof2
! REAL, EXTERNAL :: interp_0
REAL :: hm
REAL :: pi
! stuff from original initialization that has been dropped from the Registry
REAL :: vnu, xnu, xnus, dinit0, cbh, p0_temp, t0_temp, zd, zt
REAL :: qvf1, qvf2, pd_surf
INTEGER :: it
real :: thtmp, ptmp, temp(3)
LOGICAL :: moisture_init
LOGICAL :: stretch_grid, dry_sounding
#define COPY_IN
#include <em_scalar_derefs.inc>
#ifdef DM_PARALLEL
# include <em_data_calls.inc>
#endif
SELECT CASE ( model_data_order )
CASE ( DATA_ORDER_ZXY )
kds = grid%sd31 ; kde = grid%ed31 ;
ids = grid%sd32 ; ide = grid%ed32 ;
jds = grid%sd33 ; jde = grid%ed33 ;
kms = grid%sm31 ; kme = grid%em31 ;
ims = grid%sm32 ; ime = grid%em32 ;
jms = grid%sm33 ; jme = grid%em33 ;
kts = grid%sp31 ; kte = grid%ep31 ; ! note that tile is entire patch
its = grid%sp32 ; ite = grid%ep32 ; ! note that tile is entire patch
jts = grid%sp33 ; jte = grid%ep33 ; ! note that tile is entire patch
CASE ( DATA_ORDER_XYZ )
ids = grid%sd31 ; ide = grid%ed31 ;
jds = grid%sd32 ; jde = grid%ed32 ;
kds = grid%sd33 ; kde = grid%ed33 ;
ims = grid%sm31 ; ime = grid%em31 ;
jms = grid%sm32 ; jme = grid%em32 ;
kms = grid%sm33 ; kme = grid%em33 ;
its = grid%sp31 ; ite = grid%ep31 ; ! note that tile is entire patch
jts = grid%sp32 ; jte = grid%ep32 ; ! note that tile is entire patch
kts = grid%sp33 ; kte = grid%ep33 ; ! note that tile is entire patch
CASE ( DATA_ORDER_XZY )
ids = grid%sd31 ; ide = grid%ed31 ;
kds = grid%sd32 ; kde = grid%ed32 ;
jds = grid%sd33 ; jde = grid%ed33 ;
ims = grid%sm31 ; ime = grid%em31 ;
kms = grid%sm32 ; kme = grid%em32 ;
jms = grid%sm33 ; jme = grid%em33 ;
its = grid%sp31 ; ite = grid%ep31 ; ! note that tile is entire patch
kts = grid%sp32 ; kte = grid%ep32 ; ! note that tile is entire patch
jts = grid%sp33 ; jte = grid%ep33 ; ! note that tile is entire patch
END SELECT
stretch_grid = .true.
delt = 3.
! z_scale = .50
z_scale = .40
pi = 2.*asin(1.0)
write(6,*) ' pi is ',pi
nxc = (ide-ids)/2
nyc = jde/2
CALL model_to_grid_config_rec ( grid%id , model_config_rec , config_flags )
! here we check to see if the boundary conditions are set properly
CALL boundary_condition_check( config_flags, bdyzone, error, grid%id )
moisture_init = .true.
grid%itimestep=0
#ifdef DM_PARALLEL
CALL wrf_dm_bcast_bytes( icm , IWORDSIZE )
CALL wrf_dm_bcast_bytes( jcm , IWORDSIZE )
#endif
CALL set_mminlu(' ')
CALL set_iswater(1,0)
CALL set_cen_lat(1,40.)
CALL set_cen_lon(1,-105.)
CALL set_truelat1(1,0.)
CALL set_truelat2(1,0.)
CALL set_map_proj(1,0)
! here we initialize data we currently is not initialized
! in the input data
DO j = jts, jte
DO i = its, ite
msft(i,j) = 1.
msfu(i,j) = 1.
msfv(i,j) = 1.
sina(i,j) = 0.
cosa(i,j) = 1.
e(i,j) = 0.
f(i,j) = 0.
END DO
END DO
DO j = jts, jte
DO k = kts, kte
DO i = its, ite
ww(i,k,j) = 0.
END DO
END DO
END DO
step_number = 0
! set up the grid
IF (stretch_grid) THEN ! exponential stretch for eta (nearly constant dz)
DO k=1, kde
znw(k) = (exp(-(k-1)/float(kde-1)/z_scale) - exp(-1./z_scale))/ &
(1.-exp(-1./z_scale))
ENDDO
ELSE
DO k=1, kde
znw(k) = 1. - float(k-1)/float(kde-1)
ENDDO
ENDIF
DO k=1, kde-1
dnw(k) = znw(k+1) - znw(k)
rdnw(k) = 1./dnw(k)
znu(k) = 0.5*(znw(k+1)+znw(k))
ENDDO
DO k=2, kde-1
dn(k) = 0.5*(dnw(k)+dnw(k-1))
rdn(k) = 1./dn(k)
fnp(k) = .5* dnw(k )/dn(k)
fnm(k) = .5* dnw(k-1)/dn(k)
ENDDO
cof1 = (2.*dn(2)+dn(3))/(dn(2)+dn(3))*dnw(1)/dn(2)
cof2 = dn(2) /(dn(2)+dn(3))*dnw(1)/dn(3)
cf1 = fnp(2) + cof1
cf2 = fnm(2) - cof1 - cof2
cf3 = cof2
cfn = (.5*dnw(kde-1)+dn(kde-1))/dn(kde-1)
cfn1 = -.5*dnw(kde-1)/dn(kde-1)
rdx = 1./dx
rdy = 1./dy
! get the sounding from the ascii sounding file, first get dry sounding and
! calculate base state
write(6,*) ' getting dry sounding for base state '
dry_sounding = .true.
CALL get_sounding( zk, p_in, pd_in, theta, rho, u, v, qv, dry_sounding, nl_max, nl_in )
write(6,*) ' returned from reading sounding, nl_in is ',nl_in
! find ptop for the desired ztop (ztop is input from the namelist),
! and find surface pressure
p_top = interp_0( p_in, zk, ztop, nl_in )
DO j=jts,jte
DO i=its,ite ! flat surface
phb(i,1,j) = 0.
php(i,1,j) = 0.
ph0(i,1,j) = 0.
ht(i,j) = 0.
ENDDO
ENDDO
DO J = jts, jte
DO I = its, ite
p_surf = interp_0( p_in, zk, phb(i,1,j)/g, nl_in )
mub(i,j) = p_surf-p_top
! this is dry hydrostatic sounding (base state), so given p (coordinate),
! interp theta (from interp) and compute 1/rho from eqn. of state
DO K = 1, kte-1
p_level = znu(k)*(p_surf - p_top) + p_top
pb(i,k,j) = p_level
t_init(i,k,j) = interp_0( theta, p_in, p_level, nl_in ) - t0
alb(i,k,j) = (r_d/p1000mb)*(t_init(i,k,j)+t0)*(pb(i,k,j)/p1000mb)**cvpm
ENDDO
! calc hydrostatic balance (alternatively we could interp the geopotential from the
! sounding, but this assures that the base state is in exact hydrostatic balance with
! respect to the model eqns.
DO k = 2,kte
phb(i,k,j) = phb(i,k-1,j) - dnw(k-1)*mub(i,j)*alb(i,k-1,j)
ENDDO
ENDDO
ENDDO
write(6,*) ' ptop is ',p_top
write(6,*) ' base state mub(1,1), p_surf is ',mub(1,1),mub(1,1)+p_top
! calculate full state for each column - this includes moisture.
write(6,*) ' getting moist sounding for full state '
dry_sounding = .false.
CALL get_sounding( zk, p_in, pd_in, theta, rho, u, v, qv, dry_sounding, nl_max, nl_in )
DO J = jts, min(jde-1,jte)
DO I = its, min(ide-1,ite)
! At this point p_top is already set. find the DRY mass in the column
! by interpolating the DRY pressure.
pd_surf = interp_0( pd_in, zk, phb(i,1,j)/g, nl_in )
! compute the perturbation mass and the full mass
mu_1(i,j) = pd_surf-p_top - mub(i,j)
mu_2(i,j) = mu_1(i,j)
mu0(i,j) = mu_1(i,j) + mub(i,j)
! given the dry pressure and coordinate system, interp the potential
! temperature and qv
do k=1,kde-1
p_level = znu(k)*(pd_surf - p_top) + p_top
moist_1(i,k,j,P_QV) = interp_0( qv, pd_in, p_level, nl_in )
moist_2(i,k,j,P_QV) = moist_1(i,k,j,P_QV)
t_1(i,k,j) = interp_0( theta, pd_in, p_level, nl_in ) - t0
t_2(i,k,j) = t_1(i,k,j)
enddo
! integrate the hydrostatic equation (from the RHS of the bigstep
! vertical momentum equation) down from the top to get p.
! first from the top of the model to the top pressure
k = kte-1 ! top level
qvf1 = 0.5*(moist_1(i,k,j,P_QV)+moist_1(i,k,j,P_QV))
qvf2 = 1./(1.+qvf1)
qvf1 = qvf1*qvf2
! p(i,k,j) = - 0.5*mu_1(i,j)/rdnw(k)
p(i,k,j) = - 0.5*(mu_1(i,j)+qvf1*mub(i,j))/rdnw(k)/qvf2
qvf = 1. + rvovrd*moist_1(i,k,j,P_QV)
alt(i,k,j) = (r_d/p1000mb)*(t_1(i,k,j)+t0)*qvf* &
(((p(i,k,j)+pb(i,k,j))/p1000mb)**cvpm)
al(i,k,j) = alt(i,k,j) - alb(i,k,j)
! down the column
do k=kte-2,1,-1
qvf1 = 0.5*(moist_1(i,k,j,P_QV)+moist_1(i,k+1,j,P_QV))
qvf2 = 1./(1.+qvf1)
qvf1 = qvf1*qvf2
p(i,k,j) = p(i,k+1,j) - (mu_1(i,j) + qvf1*mub(i,j))/qvf2/rdn(k+1)
qvf = 1. + rvovrd*moist_1(i,k,j,P_QV)
alt(i,k,j) = (r_d/p1000mb)*(t_1(i,k,j)+t0)*qvf* &
(((p(i,k,j)+pb(i,k,j))/p1000mb)**cvpm)
al(i,k,j) = alt(i,k,j) - alb(i,k,j)
enddo
! this is the hydrostatic equation used in the model after the
! small timesteps. In the model, al (inverse density)
! is computed from the geopotential.
ph_1(i,1,j) = 0.
DO k = 2,kte
ph_1(i,k,j) = ph_1(i,k-1,j) - (1./rdnw(k-1))*( &
(mub(i,j)+mu_1(i,j))*al(i,k-1,j)+ &
mu_1(i,j)*alb(i,k-1,j) )
ph_2(i,k,j) = ph_1(i,k,j)
ph0(i,k,j) = ph_1(i,k,j) + phb(i,k,j)
ENDDO
if((i==2) .and. (j==2)) then
write(6,*) ' ph_1 calc ',ph_1(2,1,2),ph_1(2,2,2),mu_1(2,2)+mub(2,2),mu_1(2,2), &
alb(2,1,2),al(1,2,1),rdnw(1)
endif
ENDDO
ENDDO
!#if 0
! thermal perturbation to kick off convection
write(6,*) ' nxc, nyc for perturbation ',nxc,nyc
write(6,*) ' delt for perturbation ',delt
DO J = jts, min(jde-1,jte)
! yrad = dy*float(j-nyc)/4000.
yrad = 0.
DO I = its, min(ide-1,ite)
xrad = dx*float(i-nxc)/4000.
! xrad = 0.
DO K = 1, kte-1
! put in preturbation theta (bubble) and recalc density. note,
! the mass in the column is not changing, so when theta changes,
! we recompute density and geopotential
zrad = 0.5*(ph_1(i,k,j)+ph_1(i,k+1,j) &
+phb(i,k,j)+phb(i,k+1,j))/g
zrad = (zrad-1500.)/1500.
RAD=SQRT(xrad*xrad+yrad*yrad+zrad*zrad)
IF(RAD <= 1.) THEN
T_1(i,k,j)=T_1(i,k,j)+delt*COS(.5*PI*RAD)**2
T_2(i,k,j)=T_1(i,k,j)
qvf = 1. + rvovrd*moist_1(i,k,j,P_QV)
alt(i,k,j) = (r_d/p1000mb)*(t_1(i,k,j)+t0)*qvf* &
(((p(i,k,j)+pb(i,k,j))/p1000mb)**cvpm)
al(i,k,j) = alt(i,k,j) - alb(i,k,j)
ENDIF
ENDDO
! rebalance hydrostatically
DO k = 2,kte
ph_1(i,k,j) = ph_1(i,k-1,j) - (1./rdnw(k-1))*( &
(mub(i,j)+mu_1(i,j))*al(i,k-1,j)+ &
mu_1(i,j)*alb(i,k-1,j) )
ph_2(i,k,j) = ph_1(i,k,j)
ph0(i,k,j) = ph_1(i,k,j) + phb(i,k,j)
ENDDO
ENDDO
ENDDO
!#endif
write(6,*) ' mu_1 from comp ', mu_1(1,1)
write(6,*) ' full state sounding from comp, ph, p, al, t_1, qv '
do k=1,kde-1
write(6,'(i3,1x,5(1x,1pe10.3))') k, ph_1(1,k,1)+phb(1,k,1), &
p(1,k,1)+pb(1,k,1), alt(1,k,1), &
t_1(1,k,1)+t0, moist_1(1,k,1,P_QV)
enddo
write(6,*) ' pert state sounding from comp, ph_1, pp, alp, t_1, qv '
do k=1,kde-1
write(6,'(i3,1x,5(1x,1pe10.3))') k, ph_1(1,k,1), &
p(1,k,1), al(1,k,1), &
t_1(1,k,1), moist_1(1,k,1,P_QV)
enddo
! interp v
DO J = jts, jte
DO I = its, min(ide-1,ite)
IF (j == jds) THEN
z_at_v = phb(i,1,j)/g
ELSE IF (j == jde) THEN
z_at_v = phb(i,1,j-1)/g
ELSE
z_at_v = 0.5*(phb(i,1,j)+phb(i,1,j-1))/g
END IF
p_surf = interp_0( p_in, zk, z_at_v, nl_in )
DO K = 1, kte
p_level = znu(k)*(p_surf - p_top) + p_top
v_1(i,k,j) = interp_0( v, p_in, p_level, nl_in )
v_2(i,k,j) = v_1(i,k,j)
ENDDO
ENDDO
ENDDO
! interp u
DO J = jts, min(jde-1,jte)
DO I = its, ite
IF (i == ids) THEN
z_at_u = phb(i,1,j)/g
ELSE IF (i == ide) THEN
z_at_u = phb(i-1,1,j)/g
ELSE
z_at_u = 0.5*(phb(i,1,j)+phb(i-1,1,j))/g
END IF
p_surf = interp_0( p_in, zk, z_at_u, nl_in )
DO K = 1, kte
p_level = znu(k)*(p_surf - p_top) + p_top
u_1(i,k,j) = interp_0( u, p_in, p_level, nl_in )
u_2(i,k,j) = u_1(i,k,j)
ENDDO
ENDDO
ENDDO
! set w
DO J = jts, min(jde-1,jte)
DO K = kts, kte
DO I = its, min(ide-1,ite)
w_1(i,k,j) = 0.
w_2(i,k,j) = 0.
ENDDO
ENDDO
ENDDO
! set a few more things
DO J = jts, min(jde-1,jte)
DO K = kts, kte-1
DO I = its, min(ide-1,ite)
h_diabatic(i,k,j) = 0.
ENDDO
ENDDO
ENDDO
DO k=1,kte-1
t_base(k) = t_1(1,k,1)
qv_base(k) = moist_1(1,k,1,P_QV)
u_base(k) = u_1(1,k,1)
v_base(k) = v_1(1,k,1)
ENDDO
DO J = jts, min(jde-1,jte)
DO I = its, min(ide-1,ite)
thtmp = t_2(i,1,j)+t0
ptmp = p(i,1,j)+pb(i,1,j)
temp(1) = thtmp * (ptmp/p1000mb)**rcp
thtmp = t_2(i,2,j)+t0
ptmp = p(i,2,j)+pb(i,2,j)
temp(2) = thtmp * (ptmp/p1000mb)**rcp
thtmp = t_2(i,3,j)+t0
ptmp = p(i,3,j)+pb(i,3,j)
temp(3) = thtmp * (ptmp/p1000mb)**rcp
TSK(I,J)=cf1*temp(1)+cf2*temp(2)+cf3*temp(3)
TMN(I,J)=TSK(I,J)-0.5
ENDDO
ENDDO
#define COPY_OUT
#include <em_scalar_derefs.inc>
RETURN
END SUBROUTINE init_domain_rk
SUBROUTINE init_module_initialize,8
END SUBROUTINE init_module_initialize
!---------------------------------------------------------------------
! test driver for get_sounding
!
! implicit none
! integer n
! parameter(n = 1000)
! real zk(n),p(n),theta(n),rho(n),u(n),v(n),qv(n),pd(n)
! logical dry
! integer nl,k
!
! dry = .false.
! dry = .true.
! call get_sounding( zk, p, pd, theta, rho, u, v, qv, dry, n, nl )
! write(6,*) ' input levels ',nl
! write(6,*) ' sounding '
! write(6,*) ' k height(m) press (Pa) pd(Pa) theta (K) den(kg/m^3) u(m/s) v(m/s) qv(g/g) '
! do k=1,nl
! write(6,'(1x,i3,8(1x,1pe10.3))') k, zk(k), p(k), pd(k), theta(k), rho(k), u(k), v(k), qv(k)
! enddo
! end
!
!---------------------------------------------------------------------------
subroutine get_sounding( zk, p, p_dry, theta, rho, & 13,6
u, v, qv, dry, nl_max, nl_in )
implicit none
integer nl_max, nl_in
real zk(nl_max), p(nl_max), theta(nl_max), rho(nl_max), &
u(nl_max), v(nl_max), qv(nl_max), p_dry(nl_max)
logical dry
integer n
parameter(n=1000)
logical debug
parameter( debug = .true.)
! input sounding data
real p_surf, th_surf, qv_surf
real pi_surf, pi(n)
real h_input(n), th_input(n), qv_input(n), u_input(n), v_input(n)
! diagnostics
real rho_surf, p_input(n), rho_input(n)
real pm_input(n) ! this are for full moist sounding
! local data
real p1000mb,cv,cp,r,cvpm,g
parameter (p1000mb = 1.e+05, r = 287, cp = 1003., cv = cp-r, cvpm = -cv/cp, g=9.81 )
integer k, it, nl
real qvf, qvf1, dz
! first, read the sounding
call read_sounding( p_surf, th_surf, qv_surf, &
h_input, th_input, qv_input, u_input, v_input,n, nl, debug )
if(dry) then
do k=1,nl
qv_input(k) = 0.
enddo
endif
if(debug) write(6,*) ' number of input levels = ',nl
nl_in = nl
if(nl_in .gt. nl_max ) then
write(6,*) ' too many levels for input arrays ',nl_in,nl_max
stop
end if
! compute diagnostics,
! first, convert qv(g/kg) to qv(g/g)
do k=1,nl
qv_input(k) = 0.001*qv_input(k)
enddo
p_surf = 100.*p_surf ! convert to pascals
qvf = 1. + rvovrd*qv_input(1)
rho_surf = 1./((r/p1000mb)*th_surf*qvf*((p_surf/p1000mb)**cvpm))
pi_surf = (p_surf/p1000mb)**(r/cp)
if(debug) then
write(6,*) ' surface density is ',rho_surf
write(6,*) ' surface pi is ',pi_surf
end if
! integrate moist sounding hydrostatically, starting from the
! specified surface pressure
! -> first, integrate from surface to lowest level
qvf = 1. + rvovrd*qv_input(1)
qvf1 = 1. + qv_input(1)
rho_input(1) = rho_surf
dz = h_input(1)
do it=1,10
pm_input(1) = p_surf &
- 0.5*dz*(rho_surf+rho_input(1))*g*qvf1
rho_input(1) = 1./((r/p1000mb)*th_input(1)*qvf*((pm_input(1)/p1000mb)**cvpm))
enddo
! integrate up the column
do k=2,nl
rho_input(k) = rho_input(k-1)
dz = h_input(k)-h_input(k-1)
qvf1 = 0.5*(2.+(qv_input(k-1)+qv_input(k)))
qvf = 1. + rvovrd*qv_input(k) ! qv is in g/kg here
do it=1,10
pm_input(k) = pm_input(k-1) &
- 0.5*dz*(rho_input(k)+rho_input(k-1))*g*qvf1
rho_input(k) = 1./((r/p1000mb)*th_input(k)*qvf*((pm_input(k)/p1000mb)**cvpm))
enddo
enddo
! we have the moist sounding
! next, compute the dry sounding using p at the highest level from the
! moist sounding and integrating down.
p_input(nl) = pm_input(nl)
do k=nl-1,1,-1
dz = h_input(k+1)-h_input(k)
p_input(k) = p_input(k+1) + 0.5*dz*(rho_input(k)+rho_input(k+1))*g
enddo
do k=1,nl
zk(k) = h_input(k)
p(k) = pm_input(k)
p_dry(k) = p_input(k)
theta(k) = th_input(k)
rho(k) = rho_input(k)
u(k) = u_input(k)
v(k) = v_input(k)
qv(k) = qv_input(k)
enddo
if(debug) then
write(6,*) ' sounding '
write(6,*) ' k height(m) press (Pa) pd(Pa) theta (K) den(kg/m^3) u(m/s) v(m/s) qv(g/g) '
do k=1,nl
write(6,'(1x,i3,8(1x,1pe10.3))') k, zk(k), p(k), p_dry(k), theta(k), rho(k), u(k), v(k), qv(k)
enddo
end if
end subroutine get_sounding
!-------------------------------------------------------
subroutine read_sounding( ps,ts,qvs,h,th,qv,u,v,n,nl,debug ) 5
implicit none
integer n,nl
real ps,ts,qvs,h(n),th(n),qv(n),u(n),v(n)
logical end_of_file
logical debug
integer k
open(unit=10,file='input_sounding',form='formatted',status='old')
rewind(10)
read(10,*) ps, ts, qvs
if(debug) then
write(6,*) ' input sounding surface parameters '
write(6,*) ' surface pressure (mb) ',ps
write(6,*) ' surface pot. temp (K) ',ts
write(6,*) ' surface mixing ratio (g/kg) ',qvs
end if
end_of_file = .false.
k = 0
do while (.not. end_of_file)
read(10,*,end=100) h(k+1), th(k+1), qv(k+1), u(k+1), v(k+1)
k = k+1
if(debug) write(6,'(1x,i3,5(1x,e10.3))') k, h(k), th(k), qv(k), u(k), v(k)
go to 110
100 end_of_file = .true.
110 continue
enddo
nl = k
close(unit=10,status = 'keep')
end subroutine read_sounding
END MODULE module_initialize