#define LSMRUC_DBG_LVL 3000
!WRF:MODEL_LAYER:PHYSICS
!
MODULE module_sf_ruclsm 
(docs) 2
USE module_model_constants
USE module_wrf_error
! VEGETATION PARAMETERS
INTEGER :: LUCATS , BARE, NATURAL
integer, PARAMETER :: NLUS=50
CHARACTER*8 LUTYPE
INTEGER, DIMENSION(1:NLUS) :: NROTBL
real, dimension(1:NLUS) :: SNUPTBL, RSTBL, RGLTBL, HSTBL, LAITBL, &
ALBTBL, Z0TBL, LEMITBL, PCTBL, SHDTBL, MAXALB
REAL :: TOPT_DATA,CMCMAX_DATA,CFACTR_DATA,RSMAX_DATA
! SOIL PARAMETERS
INTEGER :: SLCATS
INTEGER, PARAMETER :: NSLTYPE=30
CHARACTER*8 SLTYPE
REAL, DIMENSION (1:NSLTYPE) :: BB,DRYSMC,HC, &
MAXSMC, REFSMC,SATPSI,SATDK,SATDW, WLTSMC,QTZ
! LSM GENERAL PARAMETERS
INTEGER :: SLPCATS
INTEGER, PARAMETER :: NSLOPE=30
REAL, DIMENSION (1:NSLOPE) :: SLOPE_DATA
REAL :: SBETA_DATA,FXEXP_DATA,CSOIL_DATA,SALP_DATA,REFDK_DATA, &
REFKDT_DATA,FRZK_DATA,ZBOT_DATA, SMLOW_DATA,SMHIGH_DATA, &
CZIL_DATA
CHARACTER*256 :: err_message
CONTAINS
!-----------------------------------------------------------------
SUBROUTINE LSMRUC (docs) ( & 1,6
DT,KTAU,NSL,ZS, &
RAINBL,SNOW,SNOWH,SNOWC,FRZFRAC,frpcpn, &
Z3D,P8W,T3D,QV3D,QC3D,RHO3D, & !p8W in [PA]
GLW,GSW,EMISS,CHKLOWQ, CHS, &
FLQC,FLHC,MAVAIL,CANWAT,VEGFRA,ALB,ZNT, &
SNOALB,ALBBCK, & !new
QSFC,QSG,QVG,QCG,SOILT1,TSNAV, &
TBOT,IVGTYP,ISLTYP,XLAND,XICE, &
CP,G0,LV,STBOLT, &
SOILMOIS,SH2O,SMAVAIL,SMMAX, &
TSO,SOILT,HFX,QFX,LH, &
SFCRUNOFF,UDRUNOFF,SFCEXC, &
SFCEVP,GRDFLX,ACSNOW, &
SMFR3D,KEEPFR3DFLAG, &
myj, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
!-----------------------------------------------------------------
IMPLICIT NONE
!-----------------------------------------------------------------
!
! The RUC LSM model is described in:
! Smirnova, T.G., J.M. Brown, and S.G. Benjamin, 1997:
! Performance of different soil model configurations in simulating
! ground surface temperature and surface fluxes.
! Mon. Wea. Rev. 125, 1870-1884.
! Smirnova, T.G., J.M. Brown, and D. Kim, 2000: Parameterization of
! cold-season processes in the MAPS land-surface scheme.
! J. Geophys. Res. 105, 4077-4086.
!-----------------------------------------------------------------
!-- DT time step (second)
! ktau - number of time step
! NSL - number of soil layers
! NZS - number of levels in soil
! ZS - depth of soil levels (m)
!-- RAINBL - accumulated rain in [mm] between the PBL calls
!-- RAINNCV one time step grid scale precipitation (mm/step)
! SNOW - snow water equivalent [mm]
! FRAZFRAC - fraction of frozen precipitation
!-- SNOWC flag indicating snow coverage (1 for snow cover)
!-- Z3D heights (m)
!-- P8W 3D pressure (Pa)
!-- T3D temperature (K)
!-- QV3D 3D water vapor mixing ratio (Kg/Kg)
! QC3D - 3D cloud water mixing ratio (Kg/Kg)
! RHO3D - 3D air density (kg/m^3)
!-- GLW downward long wave flux at ground surface (W/m^2)
!-- GSW absorbed short wave flux at ground surface (W/m^2)
!-- EMISS surface emissivity (between 0 and 1)
! FLQC - surface exchange coefficient for moisture (kg/m^2/s)
! FLHC - surface exchange coefficient for heat [W/m^2/s/degreeK]
! SFCEXC - surface exchange coefficient for heat [m/s]
! CANWAT - CANOPY MOISTURE CONTENT (mm)
! VEGFRA - vegetation fraction (between 0 and 1)
! ALB - surface albedo (between 0 and 1)
! SNOALB - maximum snow albedo (between 0 and 1)
! ALBBCK - snow-free albedo (between 0 and 1)
! ZNT - roughness length [m]
!-- TBOT soil temperature at lower boundary (K)
! IVGTYP - USGS vegetation type (24 classes)
! ISLTYP - STASGO soil type (16 classes)
!-- XLAND land mask (1 for land, 2 for water)
!-- CP heat capacity at constant pressure for dry air (J/kg/K)
!-- G0 acceleration due to gravity (m/s^2)
!-- LV latent heat of melting (J/kg)
!-- STBOLT Stefan-Boltzmann constant (W/m^2/K^4)
! SOILMOIS - soil moisture content (volumetric fraction)
! TSO - soil temp (K)
!-- SOILT surface temperature (K)
!-- HFX upward heat flux at the surface (W/m^2)
!-- QFX upward moisture flux at the surface (kg/m^2/s)
!-- LH upward latent heat flux (W/m^2)
! SFCRUNOFF - ground surface runoff [mm]
! UDRUNOFF - underground runoff [mm]
! SFCEVP - total evaporation in [kg/m^2]
! GRDFLX - soil heat flux (W/m^2: negative, if downward from surface)
! ACSNOW - accumulation of snow water [m]
!-- CHKLOWQ - is either 0 or 1 (so far set equal to 1).
!-- used only in MYJPBL.
!-- ims start index for i in memory
!-- ime end index for i in memory
!-- jms start index for j in memory
!-- jme end index for j in memory
!-- kms start index for k in memory
!-- kme end index for k in memory
!-------------------------------------------------------------------------
! INTEGER, PARAMETER :: nzss=5
! INTEGER, PARAMETER :: nddzs=2*(nzss-2)
INTEGER, PARAMETER :: nvegclas=24+3
REAL, INTENT(IN ) :: DT
LOGICAL, INTENT(IN ) :: myj,frpcpn
INTEGER, INTENT(IN ) :: ktau, nsl, &
ims,ime, jms,jme, kms,kme, &
ids,ide, jds,jde, kds,kde, &
its,ite, jts,jte, kts,kte
REAL, DIMENSION( ims:ime, kms:kme, jms:jme ) , &
INTENT(IN ) :: QV3D, &
QC3D, &
p8w, &
rho3D, &
T3D, &
z3D
REAL, DIMENSION( ims:ime , jms:jme ), &
INTENT(IN ) :: RAINBL, &
GLW, &
GSW, &
SNOALB, &
ALBBCK, &
FLHC, &
FLQC, &
CHS , &
EMISS, &
XICE, &
XLAND, &
VEGFRA, &
TBOT
REAL, DIMENSION( 1:nsl), INTENT(IN ) :: ZS
REAL, DIMENSION( ims:ime , jms:jme ), &
INTENT(INOUT) :: &
SNOW, & !new
SNOWH, &
SNOWC, &
CANWAT, & ! new
ALB, &
MAVAIL, &
SFCEXC, &
ZNT
REAL, DIMENSION( ims:ime , jms:jme ), &
INTENT(IN ) :: &
FRZFRAC
INTEGER, DIMENSION( ims:ime , jms:jme ), &
INTENT(IN ) :: IVGTYP, &
ISLTYP
REAL, INTENT(IN ) :: CP,G0,LV,STBOLT
REAL, DIMENSION( ims:ime , 1:nsl, jms:jme ) , &
INTENT(INOUT) :: SOILMOIS,SH2O,TSO
REAL, DIMENSION( ims:ime, jms:jme ) , &
INTENT(INOUT) :: SOILT, &
HFX, &
QFX, &
LH, &
SFCEVP, &
SFCRUNOFF, &
UDRUNOFF, &
GRDFLX, &
ACSNOW, &
QVG, &
QCG, &
QSFC, &
QSG, &
CHKLOWQ, &
SOILT1, &
TSNAV
REAL, DIMENSION( ims:ime, jms:jme ) , &
INTENT(INOUT) :: SMAVAIL, &
SMMAX
REAL, DIMENSION( its:ite, jts:jte ) :: DEW, &
PC, &
RUNOFF1, &
RUNOFF2, &
EMISSL, &
ZNTL, &
LMAVAIL, &
SMELT, &
SNOH, &
SNFLX, &
SNOM, &
EDIR, &
EC, &
ETT, &
SUBLIM, &
sflx, &
EVAPL, &
PRCPL, &
XICED, &
INFILTR
!--- soil/snow properties
REAL, DIMENSION( ims:ime, 1:nsl, jms:jme) &
:: KEEPFR3DFLAG, &
SMFR3D
REAL &
:: RHOCS, &
RHOSN, &
BCLH, &
DQM, &
KSAT, &
PSIS, &
QMIN, &
QWRTZ, &
REF, &
WILT, &
CANWATR, &
SNOWFRAC, &
SNHEI, &
SNWE
REAL :: CN, &
SAT,CW, &
C1SN, &
C2SN, &
KQWRTZ, &
KICE, &
KWT
REAL, DIMENSION(1:NSL) :: ZSMAIN, &
ZSHALF, &
DTDZS2
REAL, DIMENSION(1:2*(nsl-2)) :: DTDZS
REAL, DIMENSION(1:4001) :: TBQ
REAL, DIMENSION( 1:nsl ) :: SOILM1D, &
TSO1D, &
SOILICE, &
SOILIQW, &
SMFRKEEP
REAL, DIMENSION( 1:nsl ) :: KEEPFR
REAL :: RSM, &
SNWEPRINT, &
SNHEIPRINT
REAL :: PRCPMS, &
NEWSNMS, &
PATM, &
TABS, &
QVATM, &
QCATM, &
Q2SAT, &
SATFLG, &
CONFLX, &
RHO, &
QKMS, &
TKMS, &
INFILTRP
REAL :: cq,r61,r273,arp,brp,x,evs,eis
INTEGER :: NROOT
INTEGER :: ILAND,ISOIL
INTEGER, DIMENSION ( 1:nvegclas ) :: IFOREST
INTEGER :: I,J,K,NZS,NZS1,NDDZS
INTEGER :: k1,l,k2,kp,km
!-----------------------------------------------------------------
NZS=NSL
NDDZS=2*(nzs-2)
!---- table TBQ is for resolution of balance equation in VILKA
CQ=173.15-.05
R273=1./273.15
R61=6.1153*0.62198
ARP=77455.*41.9/461.525
BRP=64.*41.9/461.525
DO K=1,4001
CQ=CQ+.05
! TBQ(K)=R61*EXP(ARP*(R273-1./CQ)-BRP*LOG(CQ*R273))
EVS=EXP(17.67*(CQ-273.15)/(CQ-29.65))
EIS=EXP(22.514-6.15E3/CQ)
if(CQ.ge.273.15) then
! tbq is in mb
tbq(k) = R61*evs
else
tbq(k) = R61*eis
endif
END DO
!--- Initialize soil/vegetation parameters
!--- This is temporary until SI is added to mass coordinate ---!!!!!
#if ( NMM_CORE == 1 )
if(ktau+1.eq.1) then
#else
if(ktau.eq.1) then
#endif
DO J=jts,jte
DO i=its,ite
do k=1,nsl
! smfr3d (i,k,j)=soilmois(i,k,j)/900.*1.e3
keepfr3dflag(i,k,j)=0.
sh2o (i,k,j)=0.
enddo
!--- initializing to zero snow fraction
snowc(i,j) = min(1.,snowh(i,j)/0.1)
!--- initializing of snow temp
soilt1(i,j)=soilt(i,j)
tsnav(i,j) =0.5*(soilt(i,j)+tso(i,1,j))-273.
qcg (i,j) =0.
patm=P8w(i,kms,j)*1.e-2
QSG (i,j) = QSN(SOILT(i,j),TBQ)/PATM
qvg (i,j) = QSG(i,j)*mavail(i,j)
! qvg (i,j) =qv3d(i,kms,j)
qsfc(i,j) = qsg(i,j)/(1.+qsg(i,j))
SMELT(i,j) = 0.
SNOM (i,j) = 0.
SNFLX(i,j) = 0.
DEW (i,j) = 0.
PC (i,j) = 0.
zntl (i,j) = 0.
RUNOFF1(i,j) = 0.
RUNOFF2(i,j) = 0.
emissl (i,j) = 0.
! Temporarily!!!
canwat(i,j)=0.
! For RUC LSM CHKLOWQ needed for MYJPBL should
! 1 because is actual specific humidity at the surface, and
! not the saturation value
chklowq(i,j) = 1.
infiltr(i,j) = 0.
snoh (i,j) = 0.
edir (i,j) = 0.
ec (i,j) = 0.
ett (i,j) = 0.
sublim(i,j) = 0.
sflx (i,j) = 0.
evapl (i,j) = 0.
prcpl (i,j) = 0.
ENDDO
ENDDO
do k=1,nsl
soilice(k)=0.
soiliqw(k)=0.
enddo
endif
!-----------------------------------------------------------------
PRCPMS = 0.
! NROOT = 4
DO J=jts,jte
DO i=its,ite
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' IN LSMRUC ','ims,ime,jms,jme,its,ite,jts,jte,nzs', &
ims,ime,jms,jme,its,ite,jts,jte,nzs
print *,' IVGTYP, ISLTYP ', ivgtyp(i,j),isltyp(i,j)
print *,' MAVAIL ', mavail(i,j)
print *,' SOILT,QVG,P8w',soilt(i,j),qvg(i,j),p8w(i,1,j)
print *, 'LSMRUC, I,J,xland, QFX,HFX from SFCLAY',i,j,xland(i,j), &
qfx(i,j),hfx(i,j)
print *, ' GSW, GLW =',gsw(i,j),glw(i,j)
print *, 'SOILT, TSO start of time step =',soilt(i,j),(tso(i,k,j),k=1,nsl)
print *, 'SOILMOIS start of time step =',(soilmois(i,k,j),k=1,nsl)
print *, 'SMFROZEN start of time step =',(smfr3d(i,k,j),k=1,nsl)
print *, ' I,J=, after SFCLAY CHS,FLHC ',i,j,chs(i,j),flhc(i,j)
print *, 'LSMRUC, IVGTYP,ISLTYP,ZNT,ALB = ', ivgtyp(i,j),isltyp(i,j),znt(i,j),alb(i,j),i,j
print *, 'LSMRUC I,J,DT,RAINBL =',I,J,dt,RAINBL(i,j)
print *, 'XLAND ---->, ivgtype,isoiltyp,i,j',xland(i,j),ivgtyp(i,j),isltyp(i,j),i,j
ENDIF
ILAND = IVGTYP(i,j)
ISOIL = ISLTYP(I,J)
TABS = T3D(i,kms,j)
QVATM = QV3D(i,kms,j)
QCATM = QC3D(i,kms,j)
PATM = P8w(i,kms,j)*1.e-5
!---- what height is the first level?---- check!!!!!
!-- need to de-stagger from w levels to P levels
CONFLX = Z3D(i,kms,j)
! CONFLX = 0.5*Z3D(i,kms,j)
! CONFLX = 5.
RHO = RHO3D(I,kms,J)
!--- 1*e-3 is to convert from mm/s to m/s
IF(FRPCPN) THEN
PRCPMS = (RAINBL(i,j)/DT*1.e-3)*(1-FRZFRAC(I,J))
NEWSNMS = (RAINBL(i,j)/DT*1.e-3)*FRZFRAC(I,J)
ELSE
if (tabs.le.273.15) then
PRCPMS = 0.
NEWSNMS = RAINBL(i,j)/DT*1.e-3
else
PRCPMS = RAINBL(i,j)/DT*1.e-3
NEWSNMS = 0.
endif
ENDIF
!--- rooting depth is 5 levels for forests
! if(iforest(ivgtyp(i,j)).eq.1) nroot=5
!--- convert exchange coeff to [m/s]
! QKMS=FLQC(I,J)/RHO/MAVAIL(I,J)
if (myj) then
QKMS=CHS(i,j)
TKMS=CHS(i,j)
else
QKMS=FLQC(I,J)/RHO/MAVAIL(I,J)
TKMS=FLHC(I,J)/RHO/CP
endif
!--- convert incoming snow and canwat from mm to m
SNWE=SNOW(I,J)*1.E-3
SNHEI=SNOWH(I,J)
CANWATR=CANWAT(I,J)*1.E-3
SNOWFRAC=SNOWC(I,J)
!-----
zsmain(1)=0.
zshalf(1)=0.
do k=2,nzs
zsmain(k)= zs(k)
zshalf(k)=0.5*(zsmain(k-1) + zsmain(k))
enddo
!------------------------------------------------------------
!----- DDZS and DSDZ1 are for implicit soilution of soil eqns.
!-------------------------------------------------------------
NZS1=NZS-1
!-----
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' DT,NZS1, ZSMAIN, ZSHALF --->', dt,nzs1,zsmain,zshalf
ENDIF
DO K=2,NZS1
K1=2*K-3
K2=K1+1
X=DT/2./(ZSHALF(K+1)-ZSHALF(K))
DTDZS(K1)=X/(ZSMAIN(K)-ZSMAIN(K-1))
DTDZS2(K-1)=X
DTDZS(K2)=X/(ZSMAIN(K+1)-ZSMAIN(K))
END DO
CN=0.5 ! exponent
SAT=0.0004 ! canopy water saturated
CW =4.183E6
!--- Constants used in Johansen soil thermal
!--- conductivity method
KQWRTZ=7.7
KICE=2.2
KWT=0.57
!***********************************************************************
!--- Constants for snow density calculations C1SN and C2SN
c1sn=0.026
! c1sn=0.01
c2sn=21.
!***********************************************************************
NROOT= 4
! ! rooting depth
if(SNOWH(i,j).gt.0.) then
RHOSN = SNOW(i,j)/SNOWH(i,j)
else
RHOSN = 300.
endif
!--- initializing soil and surface properties
CALL SOILVEGIN ( ILAND,ISOIL,MYJ,IFOREST, &
EMISSL(I,J),PC(i,j),ZNT(I,J),QWRTZ, &
! EMISSL(I,J),PC(i,j),ZNTL(I,J),QWRTZ, &
RHOCS,BCLH,DQM,KSAT,PSIS,QMIN,REF,WILT )
!-- definition of number of soil levels in the rooting zone
IF(iforest(ivgtyp(i,j)).ne.1) THEN
!---- all vegetation types except evergreen and mixed forests
do k=2,nzs
if(zsmain(k).ge.0.4) then
NROOT=K
goto 111
endif
enddo
ELSE
!---- evergreen and mixed forests
do k=2,nzs
if(zsmain(k).ge.1.1) then
NROOT=K
goto 111
endif
enddo
ENDIF
111 continue
!-----
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' ZS, ZSMAIN, ZSHALF, CONFLX --->', zs,zsmain,zshalf,conflx
print *,'NROOT, iforest, ivgtyp, i,j ', nroot,iforest(ivgtyp(i,j)),ivgtyp(I,J),I,J
ENDIF
!*** SET ZERO-VALUE FOR SOME OUTPUT DIAGNOSTIC ARRAYS
IF((XLAND(I,J)-1.5).GE.0. .or. XICE(I,J).gt.0.5)THEN
!-- Water or ice point
SMAVAIL(I,J)=1.0
SMMAX(I,J)=1.0
! SNOW(I,J)=0.0
LMAVAIL(I,J)=1.0
ILAND=16
ISOIL=14
patm=P8w(i,kms,j)*1.e-2
qvg (i,j) = QSN(SOILT(i,j),TBQ)/PATM
qsfc(i,j) = qvg(i,j)/(1.+qvg(i,j))
CHKLOWQ(I,J)=1.
Q2SAT=QSN(TABS,TBQ)/PATM
DO K=1,NZS
SOILMOIS(I,K,J)=1.0
TSO(I,K,J)= SOILT(I,J)
ENDDO
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
PRINT*,' water point, I=',I, &
'J=',J, 'SOILT=', SOILT(i,j)
ENDIF
!--- decide if this water point is ice:
! if(tabs.le.271.) then
if(xice(i,j).gt.0.5) then
! if(soilt(i,j).le.271.or.xice(i,j).eq.1.) then
! if(tabs.le.271.or.xice(i,j).eq.1.) then
XICED(i,j)=1.
else
XICED(i,j)=0.
endif
IF(XICED(I,J).NE.1.) SNOW(I,J)=0.
IF(XICED(I,J).GT.0.5)THEN
!-- Sea-ice case
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
PRINT*,' sea-ice at water point, I=',I, &
'J=',J
ENDIF
ILAND = 24
ISOIL = 16
SMAVAIL(I,J)=1.0
SMMAX(I,J)=1.0
LMAVAIL(I,J)=1.0
! RUC model approach is to keep sea-ice skin temperature equal to temperature
! at first atmospheric level
SOILT(I,J)=MIN(271.,TABS)
ZNT(I,J)=0.011
DO K=1,NZS
SOILMOIS(I,K,J)=1.0
TSO(I,K,J)= MIN(273.15,SOILT(I,J))
ENDDO
ENDIF
! for MYJ surface and PBL scheme
if (myj) then
IF((QVATM.GE.Q2SAT*0.95).AND.QVATM.LT.qvg(I,J))THEN
! IF((QVATM.GE.Q2SAT*0.95).AND.QVATM.LT.qsg(I,J))THEN
SATFLG=0.
ELSE
SATFLG=1.0
ENDIF
else
SATFLG=1.0
endif
QFX(I,J)=QFX(I,J)*SATFLG
ELSE
!-- Land point
! Attention!!!! RUC LSM uses soil moisture content minus residual (minimum
! soil moisture content for a given soil type) as a state variable.
! If the WRF model is initialized from the RUC background model, then the
! soil moisture variable is consistent with the RUC LSM.
! If the WRF model is initialized from another background model (ETA, GFS...)
! then the residual value should be subtracted when the 1-d array of soil
! moisture is initialized before the call to SFCTMP, and after SFCTMP qmin
! should be added back in.
!
! soilm1d (k) = min(max(0.,soilmois(i,k,j)-qmin(i,j)),dqm(i,j))
DO k=1,nzs
! soilm1d - soil moisture content minus residual [m**3/m**3]
soilm1d (k) = min(max(0.,soilmois(i,k,j)),dqm)
tso1d (k) = tso(i,k,j)
ENDDO
do k=1,nzs
smfrkeep(k) = smfr3d(i,k,j)
keepfr (k) = keepfr3dflag(i,k,j)
enddo
! LMAVAIL(I,J)=max(0.00001,min(1.,soilmois(i,1,j)/(REF-QMIN)))
LMAVAIL(I,J)=max(0.00001,min(1.,soilmois(i,1,j)/dqm))
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,'LAND, i,j,tso1d,soilm1d,PATM,TABS,QVATM,QCATM,RHO', &
i,j,tso1d,soilm1d,PATM,TABS,QVATM,QCATM,RHO
print *,'CONFLX =',CONFLX
print *,'SMFRKEEP,KEEPFR ',SMFRKEEP,KEEPFR
ENDIF
!-----------------------------------------------------------------
CALL SFCTMP (dt,ktau,conflx,i,j, &
!--- input variables
nzs,nddzs,nroot, &
iland,isoil,xland(i,j),ivgtyp(i,j), &
PRCPMS,NEWSNMS,SNWE,SNHEI,SNOWFRAC,RHOSN, &
PATM,TABS,QVATM,QCATM,RHO, &
GLW(I,J),GSW(I,J),EMISSL(I,J), &
QKMS,TKMS,PC(I,J),LMAVAIL(I,J), &
canwatr,vegfra(I,J),alb(I,J),znt(I,J), &
snoalb(i,j),albbck(i,j), & !new
myj, &
!--- soil fixed fields
QWRTZ, &
rhocs,dqm,qmin,ref, &
wilt,psis,bclh,ksat, &
sat,cn,zsmain,zshalf,DTDZS,DTDZS2,tbq, &
!--- constants
cp,g0,lv,stbolt,cw,c1sn,c2sn, &
KQWRTZ,KICE,KWT, &
!--- output variables
snweprint,snheiprint,rsm, &
soilm1d,tso1d,smfrkeep,keepfr, &
soilt(I,J),soilt1(i,j),tsnav(i,j),dew(I,J), &
qvg(I,J),qsg(I,J),qcg(I,J),SMELT(I,J), &
SNOH(I,J),SNFLX(I,J),SNOM(I,J),ACSNOW(I,J), &
edir(I,J),ec(I,J),ett(I,J),qfx(I,J), &
lh(I,J),hfx(I,J),sflx(I,J),sublim(I,J), &
evapl(I,J),prcpl(I,J),runoff1(I,J), &
runoff2(I,J),soilice,soiliqw,infiltrp)
!-----------------------------------------------------------------
!*** DIAGNOSTICS
!--- available and maximum soil moisture content in the soil
!--- domain
smavail(i,j) = 0.
smmax (i,j) = 0.
do k=1,nzs-1
smavail(i,j)=smavail(i,j)+(qmin+soilm1d(k))* &
(zshalf(k+1)-zshalf(k))
smmax (i,j) =smmax (i,j)+(qmin+dqm)* &
(zshalf(k+1)-zshalf(k))
enddo
smavail(i,j)=smavail(i,j)+(qmin+soilm1d(nzs))* &
(zsmain(nzs)-zshalf(nzs))
smmax (i,j) =smmax (i,j)+(qmin+dqm)* &
(zsmain(nzs)-zshalf(nzs))
!--- Convert the water unit into mm
SFCRUNOFF(I,J) = SFCRUNOFF(I,J)+RUNOFF1(I,J)*DT*1000.0
UDRUNOFF (I,J) = UDRUNOFF(I,J)+RUNOFF2(I,J)*1000.0
SMAVAIL (I,J) = SMAVAIL(I,J) * 1000.
SMMAX (I,J) = SMMAX(I,J) * 1000.
SFCEXC (I,J) = TKMS
! SFCLAY expects QSFC as saturation mixing ration at surface
! QSFC(I,J) = QSG(I,J)
! MYJSFC expects QSFC as actual specific humidity at the surface
QSFC(I,J) = QVG(I,J)/(1.+QVG(I,J))
patm=P8w(i,kms,j)*1.e-2
Q2SAT=QSN(TABS,TBQ)/PATM
! for MYJ surface and PBL scheme
if (myj) then
IF((QVATM.GE.Q2SAT*0.95).AND.QVATM.LT.qvg(I,J))THEN
CHKLOWQ(I,J)=0.
ELSE
CHKLOWQ(I,J)=1.
ENDIF
else
CHKLOWQ(I,J)=1.
endif
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
if(CHKLOWQ(I,J).eq.0.) then
print *,'i,j,CHKLOWQ', &
i,j,CHKLOWQ(I,J)
endif
ENDIF
MAVAIL (i,j) = LMAVAIL(I,J)
! SNOW is in [mm], SNWE is in [m]; CANWAT is in mm, CANWATR is in m
SNOW (i,j) = SNWE*1000.
SNOWH (I,J) = SNHEI
CANWAT (I,J) = CANWATR*1000.
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' LAND, I=,J=, QFX, HFX after SFCTMP', i,j,lh(i,j),hfx(i,j)
ENDIF
!!! QFX (I,J) = LH(I,J)/LV
SFCEVP (I,J) = SFCEVP (I,J) + QFX (I,J) * DT
GRDFLX (I,J) = -1. * sflx(I,J)
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' QFX after change, LH ', i,j, QFX(i,j),LH(I,J)
ENDIF
!--- SNOWC snow cover flag
SNOWC(I,J)=SNOWFRAC
! IF(SNOWH(I,J).GT.0.02)THEN
! SNOWC(I,J)=1.0
! ELSE
! SNOWC(I,J)=0.0
! ENDIF
INFILTR(I,J) = INFILTRP
!--- get 3d soil fields
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,'LAND, i,j,tso1d,soilm1d - end of time step', &
i,j,tso1d,soilm1d
ENDIF
do k=1,nzs
soilmois(i,k,j) = soilm1d(k)
sh2o (i,k,j) = soiliqw(k)
tso(i,k,j) = tso1d(k)
enddo
do k=1,nzs
smfr3d(i,k,j) = smfrkeep(k)
keepfr3dflag(i,k,j) = keepfr (k)
enddo
ENDIF
ENDDO
ENDDO
!-----------------------------------------------------------------
END SUBROUTINE LSMRUC
!-----------------------------------------------------------------
SUBROUTINE SFCTMP (docs) (delt,ktau,conflx,i,j, & 1,2
!--- input variables
nzs,nddzs,nroot, &
ILAND,ISOIL,XLAND,IVGTYP, &
PRCPMS,NEWSNMS,SNWE,SNHEI,SNOWFRAC,RHOSN, &
PATM,TABS,QVATM,QCATM,rho, &
GLW,GSW,EMISS,QKMS,TKMS,PC, &
MAVAIL,CST,VEGFRA,ALB,ZNT, &
ALB_SNOW,ALB_SNOW_FREE, &
MYJ, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,ref,wilt,psis,bclh,ksat, &
sat,cn,zsmain,zshalf,DTDZS,DTDZS2,tbq, &
!--- constants
cp,g0,lv,stbolt,cw,c1sn,c2sn, &
KQWRTZ,KICE,KWT, &
!--- output variables
snweprint,snheiprint,rsm, &
soilm1d,ts1d,smfrkeep,keepfr,soilt,soilt1, &
tsnav,dew,qvg,qsg,qcg, &
SMELT,SNOH,SNFLX,SNOM,ACSNOW, &
edir1,ec1,ett1,eeta,qfx,hfx,s,sublim, &
evapl,prcpl,runoff1,runoff2,soilice, &
soiliqw,infiltr)
!-----------------------------------------------------------------
IMPLICIT NONE
!-----------------------------------------------------------------
!--- input variables
INTEGER, INTENT(IN ) :: i,j,nroot,ktau,nzs , &
nddzs !nddzs=2*(nzs-2)
REAL, INTENT(IN ) :: DELT,CONFLX
REAL, INTENT(IN ) :: C1SN,C2SN
LOGICAL, INTENT(IN ) :: myj
!--- 3-D Atmospheric variables
REAL , &
INTENT(IN ) :: PATM, &
TABS, &
QVATM, &
QCATM
REAL , &
INTENT(IN ) :: GLW, &
GSW, &
PC, &
ALB_SNOW, &
ALB_SNOW_FREE, &
VEGFRA, &
XLAND, &
RHO, &
QKMS, &
TKMS
INTEGER, INTENT(IN ) :: IVGTYP
!--- 2-D variables
REAL , &
INTENT(INOUT) :: EMISS, &
MAVAIL, &
SNOWFRAC, &
ALB, &
CST
!--- soil properties
REAL :: &
RHOCS, &
BCLH, &
DQM, &
KSAT, &
PSIS, &
QMIN, &
QWRTZ, &
REF, &
SAT, &
WILT
REAL, INTENT(IN ) :: CN, &
CW, &
CP, &
G0, &
LV, &
STBOLT, &
KQWRTZ, &
KICE, &
KWT
REAL, DIMENSION(1:NZS), INTENT(IN) :: ZSMAIN, &
ZSHALF, &
DTDZS2
REAL, DIMENSION(1:NDDZS), INTENT(IN) :: DTDZS
REAL, DIMENSION(1:4001), INTENT(IN) :: TBQ
!--- input/output variables
!-------- 3-d soil moisture and temperature
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: TS1D, &
SOILM1D, &
SMFRKEEP
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: KEEPFR
INTEGER, INTENT(INOUT) :: ILAND,ISOIL
!-------- 2-d variables
REAL , &
INTENT(INOUT) :: DEW, &
EDIR1, &
EC1, &
ETT1, &
EETA, &
EVAPL, &
INFILTR, &
RHOSN, &
SUBLIM, &
PRCPL, &
QVG, &
QSG, &
QCG, &
QFX, &
HFX, &
S, &
RUNOFF1, &
RUNOFF2, &
ACSNOW, &
SNWE, &
SNHEI, &
SMELT, &
SNOM, &
SNOH, &
SNFLX, &
SOILT, &
SOILT1, &
TSNAV, &
ZNT
!-------- 1-d variables
REAL, DIMENSION(1:NZS), INTENT(OUT) :: SOILICE, &
SOILIQW
REAL, INTENT(OUT) :: RSM, &
SNWEPRINT, &
SNHEIPRINT
!--- Local variables
INTEGER :: K,ILNB
REAL :: BSN, XSN, RHONEWSN , &
RAINF, SNTH, NEWSN, PRCPMS, NEWSNMS , &
T3, UPFLUX, XINET
REAL :: snhei_crit, keep_snow_albedo
REAL :: RNET,GSWNEW,EMISSN,ALBSN,ZNTSN
REAL :: VEGFRAC
!-----------------------------------------------------------------
integer, parameter :: ilsnow=99
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' in SFCTMP',i,j,nzs,nddzs,nroot, &
SNWE,RHOSN,SNOM,SMELT,TS1D
ENDIF
! print *,' in SFCTMP',i,j,nzs,nddzs,nroot, &
! IVGTYP,ISOIL,ILAND, &
! PRCPMS,SNWE,RHOSN, &
! PATM,TABS,QVATM,QCATM,rho
! GLW,GSW,EMISS,QKMS,TKMS,PC, &
! cst,vegfrac,alb,znt, &
!--- soil fixed fields
! QWRTZ,rhocs,dqm,qmin,ref,wilt,psis,bclh,ksat, &
! sat,cn,zsmain,zshalf,DTDZS,DTDZS2,tbq, &
!--- constants
! cp,g0,lv,stbolt,cw,c1sn,c2sn, &
! KQWRTZ,KICE,KWT
NEWSN=0.
RAINF = 0.
RSM=0.
INFILTR=0.
VEGFRAC=0.01*VEGFRA
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,'I,J,KTAU,QKMS,TKMS', i,j,ktau,qkms,tkms
print *,'GSW, GLW, SOILT, STBOLT, EMISS', &
GSW, GLW, SOILT, STBOLT, EMISS
ENDIF
SNHEI = SNWE * 1000. / RHOSN
!--------------
T3 = STBOLT*SOILT*SOILT*SOILT
UPFLUX = T3 *SOILT
XINET = EMISS*(GLW-UPFLUX)
RNET = GSW + XINET
!Calculate the amount (m) of fresh snow
if(snhei.gt.0.0081*1.e3/rhosn) then
!*** Correct snow density for current temperature (Koren et al. 1999)
BSN=delt/3600.*c1sn*exp(0.08*tsnav-c2sn*rhosn*1.e-3)
if(bsn*snwe*100..lt.1.e-4) goto 777
XSN=rhosn*(exp(bsn*snwe*100.)-1.)/(bsn*snwe*100.)
rhosn=MIN(MAX(100.,XSN),400.)
! rhosn=MIN(MAX(50.,XSN),400.)
777 continue
else
rhosn =200.
rhonewsn =100.
endif
! IF(TABS.LE.273.15)THEN
newsn=newsnms*delt
!--- consider for now that all PRCPMS went into snow
! prcpms = 0.
!---- ACSNOW - accumulation of snow water [m]
acsnow=acsnow+newsn
IF(NEWSN.GE.1.E-8) THEN
!*** Calculate fresh snow density (t > -15C, else MIN value)
!*** Eq. 10 from Koren et al. (1999)
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *, 'THERE IS NEW SNOW, newsn', newsn
ENDIF
if(tabs.lt.258.15) then
! rhonewsn=50.
rhonewsn=100.
else
rhonewsn=1.e3*max((0.10+0.0017*(Tabs-273.15+15.)**1.5) &
, 0.10)
! rhonewsn=1.e3*max((0.05+0.0017*(Tabs-273.15+15.)**1.5) &
! , 0.05)
rhonewsn=MIN(rhonewsn,400.)
! rhonewsn=100.
endif
!*** Define average snow density of the snow pack considering
!*** the amount of fresh snow (eq. 9 in Koren et al.(1999)
!*** without snow melt )
xsn=(rhosn*snwe+rhonewsn*newsn)/ &
(snwe+newsn)
rhosn=MIN(MAX(100.,XSN),400.)
! rhosn=MIN(MAX(50.,XSN),400.)
snwe=snwe+newsn
snhei=snwe*1.E3/rhosn
NEWSN=NEWSN*1.E3/rhosn
endif
! ELSE
!--- TABS is above freezing. Needed precip rates from microphysics
!--- to do a better job with mixed phase precip.
! NEWSN = 0.
!
! ENDIF
IF(PRCPMS.NE.0.) THEN
! PRCPMS is liquid precipitation rate
! RAINF is a flag used for calculation of rain water
! heat content contribution into heat budget equation. Rain's temperature
! is set equal to air temperature at the first atmospheric
! level.
RAINF=1.
ENDIF
! IF((XLAND-1.5).GE.0.)THEN
! IF(ILAND.EQ.16) THEN
! SNHEI=0.
! SNWE=0.
! ELSE
IF(SNHEI.GT.0.0) THEN
!--- Set of surface parameters should be changed to snow values for grid
!--- points where the snow cover exceeds snow threshold of 2 cm
EMISS = 0.91
! GSWNEW = GSW
! The following lines compute albedo depending on snow
! depth. For now commented out.
! alb_snow_free=0.2
! alb_snow=0.70
! SNHEI_CRIT=0.05
SNHEI_CRIT=0.01601*1.e3/rhosn
SNOWFRAC=MIN(1.,SNHEI/(2.*SNHEI_CRIT))
KEEP_SNOW_ALBEDO = 0.
IF (NEWSN.GT.0.) KEEP_SNOW_ALBEDO = 1.
!--- GSW in-coming solar
GSWNEW=GSW/(1.-ALB)
ALB = MAX(keep_snow_albedo*alb_snow, &
MIN((alb_snow_free + &
(alb_snow - alb_snow_free) * &
(snhei/(2.*SNHEI_CRIT))), alb_snow))
!--- recompute absorbed solar radiation and net radiation
!--- for new value of albedo
gswnew=gswnew*(1.-alb)
XINET = EMISS*(GLW-UPFLUX)
RNET = GSWnew + XINET
CALL SNOWSOIL ( & !--- input variables
i,j,isoil,delt,ktau,conflx,nzs,nddzs,nroot, &
ILAND,PRCPMS,RAINF,NEWSN,snhei,SNWE,snowfrac, &
RHOSN,PATM,QVATM,QCATM, &
GLW,GSWnew,EMISS,RNET,IVGTYP, &
QKMS,TKMS,PC,CST, &
RHO,VEGFRAC,ALB,ZNT, &
MYJ, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,ref,wilt,psis,bclh,ksat, &
sat,cn,zsmain,zshalf,DTDZS,DTDZS2,tbq, &
!--- constants
lv,CP,G0,cw,stbolt,tabs, &
KQWRTZ,KICE,KWT, &
!--- output variables
ilnb,snweprint,snheiprint,rsm, &
soilm1d,ts1d,smfrkeep,keepfr, &
dew,soilt,soilt1,tsnav,qvg,qsg,qcg, &
SMELT,SNOH,SNFLX,SNOM,edir1,ec1,ett1,eeta, &
qfx,hfx,s,sublim,prcpl,runoff1,runoff2, &
mavail,soilice,soiliqw,infiltr )
if(snhei.eq.0.) then
! if(snhei.le.2.e-2) then
!--- all snow is melted
! gswnew=gswnew/(1.-alb)
alb=alb_snow_free
! gswnew=gswnew*(1.-alb)
endif
ELSE
snheiprint=0.
snweprint=0.
CALL SOIL( &
!--- input variables
i,j,iland,isoil,delt,ktau,conflx,nzs,nddzs,nroot, &
PRCPMS,RAINF,PATM,QVATM,QCATM,GLW,GSW, &
EMISS,RNET,QKMS,TKMS,PC,cst,rho,vegfrac, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,ref,wilt, &
psis,bclh,ksat,sat,cn, &
zsmain,zshalf,DTDZS,DTDZS2,tbq, &
!--- constants
lv,CP,G0,cw,stbolt,tabs, &
KQWRTZ,KICE,KWT, &
!--- output variables
soilm1d,ts1d,smfrkeep,keepfr, &
dew,soilt,qvg,qsg,qcg,edir1,ec1, &
ett1,eeta,qfx,hfx,s,evapl,prcpl,runoff1, &
runoff2,mavail,soilice,soiliqw, &
infiltr)
ENDIF
! ENDIF
!
! RETURN
! END
!---------------------------------------------------------------
END SUBROUTINE SFCTMP
!---------------------------------------------------------------
FUNCTION QSN (docs) (TN,T) 6
!****************************************************************
REAL, DIMENSION(1:4001), INTENT(IN ) :: T
REAL, INTENT(IN ) :: TN
REAL QSN, R,R1,R2
INTEGER I
R=(TN-173.15)/.05+1.
I=INT(R)
IF(I.GE.1) goto 10
I=1
R=1.
10 IF(I.LE.4000) GOTO 20
I=4000
R=4001.
20 R1=T(I)
R2=R-I
QSN=(T(I+1)-R1)*R2 + R1
! print *,' in QSN, I,R,R1,R2,T(I+1),TN, QSN', I,R,r1,r2,t(i+1),tn,QSN
! RETURN
! END
!-----------------------------------------------------------------------
END FUNCTION QSN
!------------------------------------------------------------------------
SUBROUTINE SOIL (docs) ( & 1,4
!--- input variables
i,j,iland,isoil,delt,ktau,conflx,nzs,nddzs,nroot,&
PRCPMS,RAINF,PATM,QVATM,QCATM, &
GLW,GSW,EMISS,RNET, &
QKMS,TKMS,PC,cst,rho,vegfrac, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,ref,wilt,psis,bclh,ksat, &
sat,cn,zsmain,zshalf,DTDZS,DTDZS2,tbq, &
!--- constants
xlv,CP,G0_P,cw,stbolt,TABS, &
KQWRTZ,KICE,KWT, &
!--- output variables
soilmois,tso,smfrkeep,keepfr, &
dew,soilt,qvg,qsg,qcg, &
edir1,ec1,ett1,eeta,qfx,hfx,s,evapl, &
prcpl,runoff1,runoff2,mavail,soilice, &
soiliqw,infiltrp)
!*************************************************************
! Energy and moisture budget for vegetated surfaces
! without snow, heat diffusion amf Richards eqns. in
! soil
!
! DELT - time step (s)
! ktau - numver of time step
! CONFLX - depth of constant flux layer (m)
! J,I - the location of grid point
! IME, JME, KME, NZS - dimensions of the domain
! NROOT - number of levels within the root zone
! PRCPMS - precipitation rate in m/s
! PATM - pressure [bar]
! QVATM,QCATM - cloud and water vapor mixing ratio (kg/kg)
! at the first atm. level
! GLW, GSW - incoming longwave and absorbed shortwave
! radiation at the surface (W/m^2)
! EMISS,RNET - emissivity of the ground surface (0-1) and net
! radiation at the surface (W/m^2)
! QKMS - exchange coefficient for water vapor in the
! surface layer (m/s)
! TKMS - exchange coefficient for heat in the surface
! layer (m/s)
! PC - plant coefficient (resistance) (0-1)
! RHO - density of atmosphere near sueface (kg/m^3)
! VEGFRAC - greeness fraction
! RHOCS - volumetric heat capacity of dry soil
! DQM, QMIN - porosity minus residual soil moisture QMIN (m^3/m^3)
! REF, WILT - field capacity soil moisture and the
! wilting point (m^3/m^3)
! PSIS - matrix potential at saturation (m)
! BCLH - exponent for Clapp-Hornberger parameterization
! KSAT - saturated hydraulic conductivity (m/s)
! SAT - maximum value of water intercepted by canopy (m)
! CN - exponent for calculation of canopy water
! ZSMAIN - main levels in soil (m)
! ZSHALF - middle of the soil layers (m)
! DTDZS,DTDZS2 - dt/(2.*dzshalf*dzmain) and dt/dzshalf in soil
! TBQ - table to define saturated mixing ration
! of water vapor for given temperature and pressure
! SOILMOIS,TSO - soil moisture (m^3/m^3) and temperature (K)
! DEW - dew in kg/m^2s
! SOILT - skin temperature (K)
! QSG,QVG,QCG - saturated mixing ratio, mixing ratio of
! water vapor and cloud at the ground
! surface, respectively (kg/kg)
! EDIR1, EC1, ETT1, EETA - direct evaporation, evaporation of
! canopy water, transpiration in kg m-2 s-1 and total
! evaporation in m s-1.
! QFX, HFX - latent and sensible heat fluxes (W/m^2)
! S - soil heat flux in the top layer (W/m^2)
! RUNOFF - surface runoff (m/s)
! RUNOFF2 - underground runoff (m)
! MAVAIL - moisture availability in the top soil layer (0-1)
! INFILTRP - infiltration flux from the top of soil domain (m/s)
!
!*****************************************************************
IMPLICIT NONE
!-----------------------------------------------------------------
!--- input variables
INTEGER, INTENT(IN ) :: nroot,ktau,nzs , &
nddzs !nddzs=2*(nzs-2)
INTEGER, INTENT(IN ) :: i,j,iland,isoil
REAL, INTENT(IN ) :: DELT,CONFLX
!--- 3-D Atmospheric variables
REAL, &
INTENT(IN ) :: PATM, &
QVATM, &
QCATM
!--- 2-D variables
REAL, &
INTENT(IN ) :: GLW, &
GSW, &
EMISS, &
RHO, &
PC, &
VEGFRAC, &
QKMS, &
TKMS
!--- soil properties
REAL, &
INTENT(IN ) :: RHOCS, &
BCLH, &
DQM, &
KSAT, &
PSIS, &
QMIN, &
QWRTZ, &
REF, &
WILT
REAL, INTENT(IN ) :: CN, &
CW, &
KQWRTZ, &
KICE, &
KWT, &
XLV, &
g0_p
REAL, DIMENSION(1:NZS), INTENT(IN) :: ZSMAIN, &
ZSHALF, &
DTDZS2
REAL, DIMENSION(1:NDDZS), INTENT(IN) :: DTDZS
REAL, DIMENSION(1:4001), INTENT(IN) :: TBQ
!--- input/output variables
!-------- 3-d soil moisture and temperature
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: TSO, &
SOILMOIS, &
SMFRKEEP
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: KEEPFR
!-------- 2-d variables
REAL, &
INTENT(INOUT) :: DEW, &
CST, &
EDIR1, &
EC1, &
ETT1, &
EETA, &
EVAPL, &
PRCPL, &
MAVAIL, &
QVG, &
QSG, &
QCG, &
RNET, &
QFX, &
HFX, &
S, &
SAT, &
RUNOFF1, &
RUNOFF2, &
SOILT
!-------- 1-d variables
REAL, DIMENSION(1:NZS), INTENT(OUT) :: SOILICE, &
SOILIQW
!--- Local variables
REAL :: INFILTRP, transum , &
RAINF, PRCPMS , &
TABS, T3, UPFLUX, XINET
REAL :: CP,G0,LV,STBOLT,xlmelt,dzstop , &
can,epot,fac,fltot,ft,fq,hft , &
q1,ras,rhoice,sph , &
trans,zn,ci,cvw,tln,tavln,pi , &
DD1,CMC2MS,DRYCAN,WETCAN , &
INFMAX,RIW
REAL, DIMENSION(1:NZS) :: transp,cap,diffu,hydro , &
thdif,tranf,tav,soilmoism , &
soilicem,soiliqwm,detal , &
fwsat,lwsat,told,smold
REAL :: drip
INTEGER :: nzs1,nzs2,k
!-----------------------------------------------------------------
!-- define constants
! STBOLT=5.670151E-8
RHOICE=900.
CI=RHOICE*2100.
XLMELT=3.335E+5
cvw=cw
SAT=0.0004
prcpl=prcpms
!--- Initializing local arrays
DO K=1,NZS
TRANSP (K)=0.
soilmoism(k)=0.
soilice (k)=0.
soiliqw (k)=0.
soilicem (k)=0.
soiliqwm (k)=0.
lwsat (k)=0.
fwsat (k)=0.
tav (k)=0.
cap (k)=0.
thdif (k)=0.
diffu (k)=0.
hydro (k)=0.
tranf (k)=0.
detal (k)=0.
told (k)=0.
smold (k)=0.
ENDDO
NZS1=NZS-1
NZS2=NZS-2
dzstop=1./(zsmain(2)-zsmain(1))
RAS=RHO*1.E-3
RIW=rhoice*1.e-3
!--- Computation of volumetric content of ice in soil
DO K=1,NZS
!- main levels
tln=log(tso(k)/273.15)
if(tln.lt.0.) then
soiliqw(k)=(dqm+qmin)*(XLMELT* &
(tso(k)-273.15)/tso(k)/9.81/psis) &
**(-1./bclh)-qmin
soiliqw(k)=max(0.,soiliqw(k))
soiliqw(k)=min(soiliqw(k),soilmois(k))
soilice(k)=(soilmois(k)-soiliqw(k))/RIW
!---- melting and freezing is balanced, soil ice cannot increase
if(keepfr(k).eq.1.) then
soilice(k)=min(soilice(k),smfrkeep(k))
soiliqw(k)=max(0.,soilmois(k)-soilice(k)*riw)
endif
else
soilice(k)=0.
soiliqw(k)=soilmois(k)
endif
ENDDO
DO K=1,NZS1
!- middle of soil layers
tav(k)=0.5*(tso(k)+tso(k+1))
soilmoism(k)=0.5*(soilmois(k)+soilmois(k+1))
tavln=log(tav(k)/273.15)
if(tavln.lt.0.) then
soiliqwm(k)=(dqm+qmin)*(XLMELT* &
(tav(k)-273.15)/tav(k)/9.81/psis) &
**(-1./bclh)-qmin
fwsat(k)=dqm-soiliqwm(k)
lwsat(k)=soiliqwm(k)+qmin
soiliqwm(k)=max(0.,soiliqwm(k))
soiliqwm(k)=min(soiliqwm(k), soilmoism(k))
soilicem(k)=(soilmoism(k)-soiliqwm(k))/riw
!---- melting and freezing is balanced, soil ice cannot increase
if(keepfr(k).eq.1.) then
soilicem(k)=min(soilicem(k), &
0.5*(smfrkeep(k)+smfrkeep(k+1)))
soiliqwm(k)=max(0.,soilmoism(k)-soilicem(k)*riw)
fwsat(k)=dqm-soiliqwm(k)
lwsat(k)=soiliqwm(k)+qmin
endif
else
soilicem(k)=0.
soiliqwm(k)=soilmoism(k)
lwsat(k)=dqm+qmin
fwsat(k)=0.
endif
ENDDO
do k=1,nzs
if(soilice(k).gt.0.) then
smfrkeep(k)=soilice(k)
else
smfrkeep(k)=soilmois(k)/riw
endif
enddo
!******************************************************************
! SOILPROP computes thermal diffusivity, and diffusional and
! hydraulic condeuctivities
!******************************************************************
CALL SOILPROP( &
!--- input variables
nzs,fwsat,lwsat,tav,keepfr, &
soilmois,soiliqw,soilice, &
soilmoism,soiliqwm,soilicem, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,psis,bclh,ksat, &
!--- constants
riw,xlmelt,CP,G0_P,cvw,ci, &
kqwrtz,kice,kwt, &
!--- output variables
thdif,diffu,hydro,cap)
!********************************************************************
!--- CALCULATION OF CANOPY WATER (Smirnova et al., 1996, EQ.16) AND DEW
DRIP=0.
DD1=0.
FQ=QKMS
Q1=-QKMS*RAS*(QVATM - QSG)
DEW=0.
IF(QVATM.GE.QSG)THEN
DEW=FQ*(QVATM-QSG)
ENDIF
IF(DEW.NE.0.)THEN
DD1=CST+DELT*(PRCPMS +DEW*RAS)*vegfrac
ELSE
DD1=CST+ &
DELT*(PRCPMS+RAS*FQ*(QVATM-QSG) &
*(CST/SAT)**CN)*vegfrac
ENDIF
IF(DD1.LT.0.) DD1=0.
if(vegfrac.eq.0.)then
cst=0.
drip=0.
endif
IF (vegfrac.GT.0.) THEN
CST=DD1
IF(CST.GT.SAT) THEN
CST=SAT
DRIP=DD1-SAT
ENDIF
ENDIF
!--- WETCAN is the fraction of vegetated area covered by canopy
!--- water, and DRYCAN is the fraction of vegetated area where
!--- transpiration may take place.
WETCAN=(CST/SAT)**CN
DRYCAN=1.-WETCAN
! print *,'CST,DRIP',cst,drip
!**************************************************************
! TRANSF computes transpiration function
!**************************************************************
CALL TRANSF( &
!--- input variables
nzs,nroot,soiliqw,tabs, &
!--- soil fixed fields
dqm,qmin,ref,wilt,zshalf, &
!--- output variables
tranf,transum)
!--- Save soil temp and moisture from the beginning of time step
do k=1,nzs
told(k)=tso(k)
smold(k)=soilmois(k)
enddo
!**************************************************************
! SOILTEMP soilves heat budget and diffusion eqn. in soil
!**************************************************************
CALL SOILTEMP( &
!--- input variables
i,j,iland,isoil, &
delt,ktau,conflx,nzs,nddzs,nroot, &
PRCPMS,RAINF, &
PATM,TABS,QVATM,QCATM,EMISS,RNET, &
QKMS,TKMS,PC,rho,vegfrac, &
thdif,cap,drycan,wetcan, &
transum,dew,mavail, &
!--- soil fixed fields
dqm,qmin,bclh,zsmain,zshalf,DTDZS,tbq, &
!--- constants
xlv,CP,G0_P,cvw,stbolt, &
!--- output variables
tso,soilt,qvg,qsg,qcg)
!************************************************************************
!--- CALCULATION OF DEW USING NEW VALUE OF QSG OR TRANSP IF NO DEW
ETT1=0.
DEW=0.
IF(QVATM.GE.QSG)THEN
DEW=QKMS*(QVATM-QSG)
DO K=1,NZS
TRANSP(K)=0.
ENDDO
ELSE
DO K=1,NROOT
TRANSP(K)=VEGFRAC*RAS*QKMS* &
(QVATM-QSG)* &
PC*TRANF(K)*DRYCAN/ZSHALF(NROOT+1)
IF(TRANSP(K).GT.0.) TRANSP(K)=0.
ETT1=ETT1-TRANSP(K)
ENDDO
DO k=nroot+1,nzs
transp(k)=0.
enddo
ENDIF
!-- Recalculating of volumetric content of frozen water in soil
DO K=1,NZS
!- main levels
tln=log(tso(k)/273.15)
if(tln.lt.0.) then
soiliqw(k)=(dqm+qmin)*(XLMELT* &
(tso(k)-273.15)/tso(k)/9.81/psis) &
**(-1./bclh)-qmin
soiliqw(k)=max(0.,soiliqw(k))
soiliqw(k)=min(soiliqw(k),soilmois(k))
soilice(k)=(soilmois(k)-soiliqw(k))/riw
!---- melting and freezing is balanced, soil ice cannot increase
if(keepfr(k).eq.1.) then
soilice(k)=min(soilice(k),smfrkeep(k))
soiliqw(k)=max(0.,soilmois(k)-soilice(k)*riw)
endif
else
soilice(k)=0.
soiliqw(k)=soilmois(k)
endif
ENDDO
INFMAX=999.
!--- The threshold when the infiltration stops is:
!--- volumetric content of unfrozen pores < 0.12
if((dqm+qmin-riw*soilicem(1)).lt.0.12) &
INFMAX=0.
!*************************************************************************
! SOILMOIST solves moisture budget (Smirnova et al., 1996, EQ.22,28)
! and Richards eqn.
!*************************************************************************
CALL SOILMOIST ( &
!-- input
delt,nzs,nddzs,DTDZS,DTDZS2, &
zsmain,zshalf,diffu,hydro, &
QSG,QVG,QCG,QCATM,QVATM,-PRCPMS, &
QKMS,TRANSP,DRIP,DEW,0.,SOILICE,VEGFRAC, &
!-- soil properties
DQM,QMIN,REF,KSAT,RAS,INFMAX, &
!-- output
SOILMOIS,MAVAIL,RUNOFF1, &
RUNOFF2,INFILTRP)
!--- KEEPFR is 1 when the temperature and moisture in soil
!--- are both increasing. In this case soil ice should not
!--- be increasing according to the freezing curve.
!--- Some part of ice is melted, but additional water is
!--- getting frozen. Thus, only structure of frozen soil is
!--- changed, and phase changes are not affecting the heat
!--- transfer. This situation may happen when it rains on the
!--- frozen soil.
do k=1,nzs
if (soilice(k).gt.0.) then
if(tso(k).gt.told(k).and.soilmois(k).gt.smold(k)) then
keepfr(k)=1.
else
keepfr(k)=0.
endif
endif
enddo
!--- THE DIAGNOSTICS OF SURFACE FLUXES
T3 = STBOLT*SOILT*SOILT*SOILT
UPFLUX = T3 *SOILT
XINET = EMISS*(GLW-UPFLUX)
RNET = GSW + XINET
HFT=-TKMS*CP*RHO*(TABS-SOILT)
Q1=-QKMS*RAS*(QVATM - QSG)
EDIR1 =-(1.-vegfrac)*QKMS*RAS* &
(QVATM-QVG)
IF (Q1.LE.0.) THEN
! --- condensation
EC1=0.
EDIR1=0.
ETT1=0.
! EETA=0.
QFX=- XLV*RHO*DEW
EETA= QFX/XLV
ELSE
! --- evaporation
EC1 = Q1 * WETCAN
CMC2MS=CST/DELT
if(EC1.gt.CMC2MS) cst=0.
EC1=MIN(CMC2MS,EC1)*vegfrac
EETA = (EDIR1 + EC1 + ETT1)*1.E3
! to convert from kg m-2 s-1 to m s-1: 1/rho water=1.e-3************
QFX= XLV * EETA
ENDIF
EVAPL=QFX/XLV
S=THDIF(1)*CAP(1)*DZSTOP*(TSO(1)-TSO(2))
HFX=HFT
FLTOT=RNET-HFT-QFX-S
222 CONTINUE
1123 FORMAT(I5,8F12.3)
1133 FORMAT(I7,8E12.4)
123 format(i6,f6.2,7f8.1)
122 FORMAT(1X,2I3,6F8.1,F8.3,F8.2)
! RETURN
! END
!-------------------------------------------------------------------
END SUBROUTINE SOIL
!-------------------------------------------------------------------
SUBROUTINE SNOWSOIL (docs) ( & 1,6
!--- input variables
i,j,isoil,delt,ktau,conflx,nzs,nddzs,nroot, &
ILAND,PRCPMS,RAINF,NEWSNOW,snhei,SNWE,SNOWFRAC, &
RHOSN, &
PATM,QVATM,QCATM, &
GLW,GSW,EMISS,RNET,IVGTYP, &
QKMS,TKMS,PC,cst,rho,vegfrac,alb,znt, &
MYJ, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,ref,wilt,psis,bclh,ksat, &
sat,cn,zsmain,zshalf,DTDZS,DTDZS2,tbq, &
!--- constants
xlv,CP,G0_P,cw,stbolt,TABS, &
KQWRTZ,KICE,KWT, &
!--- output variables
ilnb,snweprint,snheiprint,rsm, &
soilmois,tso,smfrkeep,keepfr, &
dew,soilt,soilt1,tsnav, &
qvg,qsg,qcg,SMELT,SNOH,SNFLX,SNOM, &
edir1,ec1,ett1,eeta,qfx,hfx,s,sublim, &
prcpl,runoff1,runoff2,mavail,soilice, &
soiliqw,infiltrp )
!***************************************************************
! Energy and moisture budget for snow, heat diffusion eqns.
! in snow and soil, Richards eqn. for soil covered with snow
!
! DELT - time step (s)
! ktau - numver of time step
! CONFLX - depth of constant flux layer (m)
! J,I - the location of grid point
! IME, JME, NZS - dimensions of the domain
! NROOT - number of levels within the root zone
! PRCPMS - precipitation rate in m/s
! NEWSNOW - pcpn in soilid form (m)
! SNHEI, SNWE - snow height and snow water equivalent (m)
! RHOSN - snow density (kg/m-3)
! PATM - pressure (bar)
! QVATM,QCATM - cloud and water vapor mixing ratio
! at the first atm. level (kg/kg)
! GLW, GSW - incoming longwave and absorbed shortwave
! radiation at the surface (W/m^2)
! EMISS,RNET - emissivity (0-1) of the ground surface and net
! radiation at the surface (W/m^2)
! QKMS - exchange coefficient for water vapor in the
! surface layer (m/s)
! TKMS - exchange coefficient for heat in the surface
! layer (m/s)
! PC - plant coefficient (resistance) (0-1)
! RHO - density of atmosphere near surface (kg/m^3)
! VEGFRAC - greeness fraction (0-1)
! RHOCS - volumetric heat capacity of dry soil (J/m^3/K)
! DQM, QMIN - porosity minus residual soil moisture QMIN (m^3/m^3)
! REF, WILT - field capacity soil moisture and the
! wilting point (m^3/m^3)
! PSIS - matrix potential at saturation (m)
! BCLH - exponent for Clapp-Hornberger parameterization
! KSAT - saturated hydraulic conductivity (m/s)
! SAT - maximum value of water intercepted by canopy (m)
! CN - exponent for calculation of canopy water
! ZSMAIN - main levels in soil (m)
! ZSHALF - middle of the soil layers (m)
! DTDZS,DTDZS2 - dt/(2.*dzshalf*dzmain) and dt/dzshalf in soil
! TBQ - table to define saturated mixing ration
! of water vapor for given temperature and pressure
! ilnb - number of layers in snow
! rsm - liquid water inside snow pack (m)
! SOILMOIS,TSO - soil moisture (m^3/m^3) and temperature (K)
! DEW - dew in (kg/m^2 s)
! SOILT - skin temperature (K)
! SOILT1 - snow temperature at 7.5 cm depth (K)
! TSNAV - average temperature of snow pack (C)
! QSG,QVG,QCG - saturated mixing ratio, mixing ratio of
! water vapor and cloud at the ground
! surface, respectively (kg/kg)
! EDIR1, EC1, ETT1, EETA - direct evaporation, evaporation of
! canopy water, transpiration (kg m-2 s-1) and total
! evaporation in (m s-1).
! QFX, HFX - latent and sensible heat fluxes (W/m^2)
! S - soil heat flux in the top layer (W/m^2)
! SUBLIM - snow sublimation (kg/m^2/s)
! RUNOFF1 - surface runoff (m/s)
! RUNOFF2 - underground runoff (m)
! MAVAIL - moisture availability in the top soil layer (0-1)
! SOILICE - content of soil ice in soil layers (m^3/m^3)
! SOILIQW - lliquid water in soil layers (m^3/m^3)
! INFILTRP - infiltration flux from the top of soil domain (m/s)
! XINET - net long-wave radiation (W/m^2)
!
!*******************************************************************
IMPLICIT NONE
!-------------------------------------------------------------------
!--- input variables
INTEGER, INTENT(IN ) :: nroot,ktau,nzs , &
nddzs !nddzs=2*(nzs-2)
INTEGER, INTENT(IN ) :: i,j,isoil
REAL, INTENT(IN ) :: DELT,CONFLX,PRCPMS , &
RAINF,NEWSNOW
LOGICAL, INTENT(IN ) :: myj
!--- 3-D Atmospheric variables
REAL, &
INTENT(IN ) :: PATM, &
QVATM, &
QCATM
!--- 2-D variables
REAL , &
INTENT(IN ) :: GLW, &
GSW, &
RHO, &
PC, &
VEGFRAC, &
QKMS, &
TKMS
INTEGER, INTENT(IN ) :: IVGTYP
!--- soil properties
REAL , &
INTENT(IN ) :: RHOCS, &
BCLH, &
DQM, &
KSAT, &
PSIS, &
QMIN, &
QWRTZ, &
REF, &
SAT, &
WILT
REAL, INTENT(IN ) :: CN, &
CW, &
XLV, &
G0_P, &
KQWRTZ, &
KICE, &
KWT
REAL, DIMENSION(1:NZS), INTENT(IN) :: ZSMAIN, &
ZSHALF, &
DTDZS2
REAL, DIMENSION(1:NDDZS), INTENT(IN) :: DTDZS
REAL, DIMENSION(1:4001), INTENT(IN) :: TBQ
!--- input/output variables
!-------- 3-d soil moisture and temperature
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: TSO, &
SOILMOIS, &
SMFRKEEP
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: KEEPFR
INTEGER, INTENT(INOUT) :: ILAND
!-------- 2-d variables
REAL , &
INTENT(INOUT) :: DEW, &
CST, &
EDIR1, &
EC1, &
ETT1, &
EETA, &
RHOSN, &
SUBLIM, &
PRCPL, &
ALB, &
EMISS, &
ZNT, &
MAVAIL, &
QVG, &
QSG, &
QCG, &
QFX, &
HFX, &
S, &
RUNOFF1, &
RUNOFF2, &
SNWE, &
SNHEI, &
SMELT, &
SNOM, &
SNOH, &
SNFLX, &
SOILT, &
SOILT1, &
SNOWFRAC, &
TSNAV
INTEGER, INTENT(INOUT) :: ILNB
!-------- 1-d variables
REAL, DIMENSION(1:NZS), INTENT(OUT) :: SOILICE, &
SOILIQW
REAL, INTENT(OUT) :: RSM, &
SNWEPRINT, &
SNHEIPRINT
!--- Local variables
INTEGER :: nzs1,nzs2,k
REAL :: INFILTRP, RHONEWSN,TRANSUM , &
SNTH, NEWSN , &
TABS, T3, UPFLUX, XINET , &
BETA, SNWEPR,EPDT,PP
REAL :: CP,G0,LV,xlvm,STBOLT,xlmelt,dzstop , &
can,epot,fac,fltot,ft,fq,hft , &
q1,ras,rhoice,sph , &
trans,zn,ci,cvw,tln,tavln,pi , &
DD1,CMC2MS,DRYCAN,WETCAN , &
INFMAX,RIW,DELTSN,H,UMVEG
REAL, DIMENSION(1:NZS) :: transp,cap,diffu,hydro , &
thdif,tranf,tav,soilmoism , &
soilicem,soiliqwm,detal , &
fwsat,lwsat,told,smold
REAL :: drip
REAL :: RNET
!-----------------------------------------------------------------
cvw=cw
XLMELT=3.335E+5
!-- the next line calculates heat of sublimation of water vapor
XLVm=XLV+XLMELT
! STBOLT=5.670151E-8
!--- SNOW flag -- 99
ILAND=99
!--- DELTSN - is the threshold for splitting the snow layer into 2 layers.
!--- With snow density 400 kg/m^3, this threshold is equal to 7.5 cm,
!--- equivalent to 0.03 m SNWE. For other snow densities the threshold is
!--- computed using SNWE=0.03 m and current snow density.
!--- SNTH - the threshold below which the snow layer is combined with
!--- the top soil layer. SNTH is computed using snwe=0.016 m, and
!--- equals 4 cm for snow density 400 kg/m^3.
DELTSN=0.0301*1.e3/rhosn
snth=0.01601*1.e3/rhosn
RHOICE=900.
CI=RHOICE*2100.
RAS=RHO*1.E-3
RIW=rhoice*1.e-3
MAVAIL=1.
RSM=0.
DO K=1,NZS
TRANSP (K)=0.
soilmoism (k)=0.
soiliqwm (k)=0.
soilice (k)=0.
soilicem (k)=0.
lwsat (k)=0.
fwsat (k)=0.
tav (k)=0.
cap (k)=0.
diffu (k)=0.
hydro (k)=0.
thdif (k)=0.
tranf (k)=0.
detal (k)=0.
told (k)=0.
smold (k)=0.
ENDDO
snweprint=0.
snheiprint=0.
prcpl=prcpms
!*** DELTSN is the depth of the top layer of snow where
!*** there is a temperature gradient, the rest of the snow layer
!*** is considered to have constant temperature
NZS1=NZS-1
NZS2=NZS-2
DZSTOP=1./(zsmain(2)-zsmain(1))
!----- THE CALCULATION OF THERMAL DIFFUSIVITY, DIFFUSIONAL AND ---
!----- HYDRAULIC CONDUCTIVITY (SMIRNOVA ET AL. 1996, EQ.2,5,6) ---
!tgs - the following loop is added to define the amount of frozen
!tgs - water in soil if there is any
DO K=1,NZS
tln=log(tso(k)/273.15)
if(tln.lt.0.) then
soiliqw(k)=(dqm+qmin)*(XLMELT* &
(tso(k)-273.15)/tso(k)/9.81/psis) &
**(-1./bclh)-qmin
soiliqw(k)=max(0.,soiliqw(k))
soiliqw(k)=min(soiliqw(k),soilmois(k))
soilice(k)=(soilmois(k)-soiliqw(k))/riw
!---- melting and freezing is balanced, soil ice cannot increase
if(keepfr(k).eq.1.) then
soilice(k)=min(soilice(k),smfrkeep(k))
soiliqw(k)=max(0.,soilmois(k)-soilice(k)*rhoice*1.e-3)
endif
else
soilice(k)=0.
soiliqw(k)=soilmois(k)
endif
ENDDO
DO K=1,NZS1
tav(k)=0.5*(tso(k)+tso(k+1))
soilmoism(k)=0.5*(soilmois(k)+soilmois(k+1))
tavln=log(tav(k)/273.15)
if(tavln.lt.0.) then
soiliqwm(k)=(dqm+qmin)*(XLMELT* &
(tav(k)-273.15)/tav(k)/9.81/psis) &
**(-1./bclh)-qmin
fwsat(k)=dqm-soiliqwm(k)
lwsat(k)=soiliqwm(k)+qmin
soiliqwm(k)=max(0.,soiliqwm(k))
soiliqwm(k)=min(soiliqwm(k), soilmoism(k))
soilicem(k)=(soilmoism(k)-soiliqwm(k))/riw
!---- melting and freezing is balanced, soil ice cannot increase
if(keepfr(k).eq.1.) then
soilicem(k)=min(soilicem(k), &
0.5*(smfrkeep(k)+smfrkeep(k+1)))
soiliqwm(k)=max(0.,soilmoism(k)-soilicem(k)*riw)
fwsat(k)=dqm-soiliqwm(k)
lwsat(k)=soiliqwm(k)+qmin
endif
else
soilicem(k)=0.
soiliqwm(k)=soilmoism(k)
lwsat(k)=dqm+qmin
fwsat(k)=0.
endif
ENDDO
do k=1,nzs
if(soilice(k).gt.0.) then
smfrkeep(k)=soilice(k)
else
smfrkeep(k)=soilmois(k)/riw
endif
enddo
! print *,'etaf,etal,etamf,etaml,lwsat,fwsat',
! 1 soilice,soiliqw,soilicem,soiliqwm,lwsat,fwsat
!******************************************************************
! SOILPROP computes thermal diffusivity, and diffusional and
! hydraulic condeuctivities
!******************************************************************
CALL SOILPROP( &
!--- input variables
nzs,fwsat,lwsat,tav,keepfr, &
soilmois,soiliqw,soilice, &
soilmoism,soiliqwm,soilicem, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,psis,bclh,ksat, &
!--- constants
riw,xlmelt,CP,G0_P,cvw,ci, &
kqwrtz,kice,kwt, &
!--- output variables
thdif,diffu,hydro,cap)
!********************************************************************
!--- CALCULATION OF CANOPY WATER (Smirnova et al., 1996, EQ.16) AND DEW
DRIP=0.
SMELT=0.
DD1=0.
H=1.
FQ=QKMS
!--- If vegfrac.ne.0. then part of falling snow can be
!--- intercepted by the canopy.
DEW=0.
UMVEG=1.-vegfrac
EPOT = -FQ*(QVATM-QSG)
IF(vegfrac.EQ.0.) then
cst=0.
drip=0.
ELSE
IF(EPOT.GE.0.) THEN
! Evaporation
DD1=CST+(NEWSNOW*RHOSN*1.E-3 &
!-- need to think more if we want this change....
-DELT*(RAS*EPOT &
! -DELT*(-PRCPMS+RAS*EPOT &
*(CST/SAT)**CN)) *vegfrac
ELSE
! Sublimation
DEW = - EPOT
DD1=CST+(NEWSNOW*RHOSN*1.E-3+delt*( &
! DD1=CST+(NEWSNOW*RHOSN*1.E-3+delt*(PRCPMS &
+DEW*RAS)) *vegfrac
ENDIF
IF(DD1.LT.0.) DD1=0.
IF (vegfrac.GT.0.) THEN
CST=DD1
IF(CST.GT.SAT*vegfrac) THEN
CST=SAT*vegfrac
DRIP=DD1-SAT*vegfrac
ENDIF
ENDIF
!--- In SFCTMP NEWSNOW is added to SNHEI as if there is no vegetation
!--- With vegetation part of NEWSNOW can be intercepted by canopy until
!--- the saturation is reached. After the canopy saturation is reached
!--- DRIP in the solid form will be added to SNOW cover.
!!! 4 Nov 07 SNWE=(SNHEI-vegfrac*NEWSNOW)*RHOSN*1.E-3 &
!!! 4 Nov 07 + DRIP &
! - 10% of liquid precip could be added to snow water
! - this is based on SnowMIP2.
! - something more intelligent should be done to liquid water
SNWE = SNWE &
+0.10*prcpms*delt
ENDIF
DRIP=0.
SNHEI=SNWE*1.e3/RHOSN
SNWEPR=SNWE
! check if all snow can evaporate during DT
BETA=1.
EPDT = EPOT * RAS *DELT*UMVEG
IF(SNWEPR.LE.EPDT) THEN
BETA=SNWEPR/max(1.e-8,EPDT)
SNWE=0.
SNHEI=0.
ENDIF
WETCAN=(CST/SAT)**CN
DRYCAN=1.-WETCAN
!**************************************************************
! TRANSF computes transpiration function
!**************************************************************
CALL TRANSF( &
!--- input variables
nzs,nroot,soiliqw,tabs, &
!--- soil fixed fields
dqm,qmin,ref,wilt,zshalf, &
!--- output variables
tranf,transum)
!--- Save soil temp and moisture from the beginning of time step
do k=1,nzs
told(k)=tso(k)
smold(k)=soilmois(k)
enddo
!**************************************************************
! SOILTEMP soilves heat budget and diffusion eqn. in soil
!**************************************************************
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *, 'TSO before calling SNOWTEMP: ', tso
ENDIF
CALL SNOWTEMP( &
!--- input variables
i,j,iland,isoil, &
delt,ktau,conflx,nzs,nddzs,nroot, &
snwe,snwepr,snhei,newsnow,snowfrac, &
beta,deltsn,snth,rhosn, &
PRCPMS,RAINF, &
PATM,TABS,QVATM,QCATM, &
GLW,GSW,EMISS,RNET, &
QKMS,TKMS,PC,rho,vegfrac, &
thdif,cap,drycan,wetcan,cst, &
tranf,transum,dew,mavail, &
!--- soil fixed fields
dqm,qmin,psis,bclh, &
zsmain,zshalf,DTDZS,tbq, &
!--- constants
xlvm,CP,G0_P,cvw,stbolt, &
!--- output variables
snweprint,snheiprint,rsm, &
tso,soilt,soilt1,tsnav,qvg,qsg,qcg, &
smelt,snoh,snflx,ilnb)
!************************************************************************
!--- RECALCULATION OF DEW USING NEW VALUE OF QSG OR TRANSP IF NO DEW
DEW=0.
ETT1=0.
PP=PATM*1.E3
QSG= QSN(SOILT,TBQ)/PP
EPOT = -FQ*(QVATM-QSG)
IF(EPOT.GE.0.) THEN
! Evaporation
DO K=1,NROOT
TRANSP(K)=vegfrac*RAS*FQ*(QVATM-QSG) &
*PC*tranf(K)*DRYCAN/zshalf(NROOT+1)
IF(TRANSP(K).GT.0.) TRANSP(K)=0.
ETT1=ETT1-TRANSP(K)
ENDDO
DO k=nroot+1,nzs
transp(k)=0.
enddo
ELSE
! Sublimation
DEW=-EPOT
DO K=1,NZS
TRANSP(K)=0.
ENDDO
ETT1=0.
ENDIF
!-- recalculating of frozen water in soil
DO K=1,NZS
tln=log(tso(k)/273.15)
if(tln.lt.0.) then
soiliqw(k)=(dqm+qmin)*(XLMELT* &
(tso(k)-273.15)/tso(k)/9.81/psis) &
**(-1./bclh)-qmin
soiliqw(k)=max(0.,soiliqw(k))
soiliqw(k)=min(soiliqw(k),soilmois(k))
soilice(k)=(soilmois(k)-soiliqw(k))/riw
!---- melting and freezing is balanced, soil ice cannot increase
if(keepfr(k).eq.1.) then
soilice(k)=min(soilice(k),smfrkeep(k))
soiliqw(k)=max(0.,soilmois(k)-soilice(k)*riw)
endif
else
soilice(k)=0.
soiliqw(k)=soilmois(k)
endif
ENDDO
INFMAX=999.
!--- The threshold when the infiltration stops is:
!--- volumetric content of unfrozen pores < 0.12
soilicem(1)=0.5*(soilice(1)+soilice(2))
if((dqm+qmin-riw*soilicem(1)).lt.0.12) &
INFMAX=0.
!*************************************************************************
!--- TQCAN FOR SOLUTION OF MOISTURE BALANCE (Smirnova et al. 1996, EQ.22,28)
! AND TSO,ETA PROFILES
!*************************************************************************
CALL SOILMOIST ( &
!-- input
delt,nzs,nddzs,DTDZS,DTDZS2, &
zsmain,zshalf,diffu,hydro, &
! 4 Nov 07 QSG,QVG,QCG,QCATM,QVATM,-0.9*PRCPMS/(1.-vegfrac), &
QSG,QVG,QCG,QCATM,QVATM,-0.9*PRCPMS, &
! QSG,QVG,QCG,QCATM,QVATM,-PRCPMS, &
0.,TRANSP,0., &
0.,SMELT,soilice,vegfrac, &
!-- soil properties
DQM,QMIN,REF,KSAT,RAS,INFMAX, &
!-- output
soilmois,MAVAIL,RUNOFF1, &
RUNOFF2,infiltrp)
! 4 Nov 07 - update CST for snow melt
if(snwe.ne.0.) then
CST=(1.-min(1.,smelt/snwe))*CST
else
CST=0.
endif
!-- Restore land-use parameters if snow is less than threshold
IF(SNHEI.EQ.0.) then
tsnav=soilt-273.15
CALL SNOWFREE(ivgtyp,myj,emiss, &
znt,iland)
smelt=smelt+snwe/delt
rsm=0.
! snwe=0.
ENDIF
! 3apr2009
! temporary fix, comment out following line, only initialized
! at the start time and this stack variable is not saved, and
! not assigned to anything
! better idea is to pass SNOM back up through the argument list
! into the ACSNOM variable in the grid derived type
! SNOM=SNOM+SMELT*DELT
!--- KEEPFR is 1 when the temperature and moisture in soil
!--- are both increasing. In this case soil ice should not
!--- be increasing according to the freezing curve.
!--- Some part of ice is melted, but additional water is
!--- getting frozen. Thus, only structure of frozen soil is
!--- changed, and phase changes are not affecting the heat
!--- transfer. This situation may happen when it rains on the
!--- frozen soil.
do k=1,nzs
if (soilice(k).gt.0.) then
if(tso(k).gt.told(k).and.soilmois(k).gt.smold(k)) then
keepfr(k)=1.
else
keepfr(k)=0.
endif
endif
enddo
!--- THE DIAGNOSTICS OF SURFACE FLUXES
T3 = STBOLT*SOILT*SOILT*SOILT
UPFLUX = T3 *SOILT
XINET = EMISS*(GLW-UPFLUX)
RNET = GSW + XINET
HFT=- TKMS*CP*RHO*(TABS-SOILT)
Q1 = - FQ*RAS* (QVATM - QSG)
EDIR1 = Q1*UMVEG *BETA
IF (Q1.LT.0.) THEN
! --- condensation
EC1=0.
EDIR1=0.
ETT1=0.
! EETA=0.
DEW=FQ*(QVATM-QSG)
QFX= -XLVm*RHO*DEW
sublim=QFX/XLVm
eeta=QFX/XLVm
ELSE
! --- evaporation
EC1 = Q1 * WETCAN
CMC2MS=CST/DELT
if(EC1.gt.CMC2MS) cst=0.
EC1=MIN(CMC2MS,EC1)*vegfrac
EETA = (EDIR1 + EC1 + ETT1)*1.E3
! to convert from kg m-2 s-1 to m s-1: 1/rho water=1.e-3************
QFX= XLVm * EETA
sublim=(EDIR1 + EC1)*1.E3
ENDIF
s=THDIF(1)*CAP(1)*dzstop*(tso(1)-tso(2))
HFX=HFT
FLTOT=RNET-HFT-QFX-S
222 CONTINUE
1123 FORMAT(I5,8F12.3)
1133 FORMAT(I7,8E12.4)
123 format(i6,f6.2,7f8.1)
122 FORMAT(1X,2I3,6F8.1,F8.3,F8.2)
! RETURN
! END
!-------------------------------------------------------------------
END SUBROUTINE SNOWSOIL
!-------------------------------------------------------------------
SUBROUTINE SOILTEMP (docs) ( & 1,2
!--- input variables
i,j,iland,isoil, &
delt,ktau,conflx,nzs,nddzs,nroot, &
PRCPMS,RAINF,PATM,TABS,QVATM,QCATM, &
EMISS,RNET, &
QKMS,TKMS,PC,RHO,VEGFRAC, &
THDIF,CAP,DRYCAN,WETCAN, &
TRANSUM,DEW,MAVAIL, &
!--- soil fixed fields
DQM,QMIN,BCLH, &
ZSMAIN,ZSHALF,DTDZS,TBQ, &
!--- constants
XLV,CP,G0_P,CVW,STBOLT, &
!--- output variables
TSO,SOILT,QVG,QSG,QCG)
!*************************************************************
! Energy budget equation and heat diffusion eqn are
! solved here and
!
! DELT - time step (s)
! ktau - numver of time step
! CONFLX - depth of constant flux layer (m)
! IME, JME, KME, NZS - dimensions of the domain
! NROOT - number of levels within the root zone
! PRCPMS - precipitation rate in m/s
! COTSO, RHTSO - coefficients for implicit solution of
! heat diffusion equation
! THDIF - thermal diffusivity (m^2/s)
! QSG,QVG,QCG - saturated mixing ratio, mixing ratio of
! water vapor and cloud at the ground
! surface, respectively (kg/kg)
! PATM - pressure [bar]
! QC3D,QV3D - cloud and water vapor mixing ratio
! at the first atm. level (kg/kg)
! EMISS,RNET - emissivity (0-1) of the ground surface and net
! radiation at the surface (W/m^2)
! QKMS - exchange coefficient for water vapor in the
! surface layer (m/s)
! TKMS - exchange coefficient for heat in the surface
! layer (m/s)
! PC - plant coefficient (resistance)
! RHO - density of atmosphere near surface (kg/m^3)
! VEGFRAC - greeness fraction (0-1)
! CAP - volumetric heat capacity (J/m^3/K)
! DRYCAN - dry fraction of vegetated area where
! transpiration may take place (0-1)
! WETCAN - fraction of vegetated area covered by canopy
! water (0-1)
! TRANSUM - transpiration function integrated over the
! rooting zone (m)
! DEW - dew in kg/m^2s
! MAVAIL - fraction of maximum soil moisture in the top
! layer (0-1)
! ZSMAIN - main levels in soil (m)
! ZSHALF - middle of the soil layers (m)
! DTDZS - dt/(2.*dzshalf*dzmain)
! TBQ - table to define saturated mixing ration
! of water vapor for given temperature and pressure
! TSO - soil temperature (K)
! SOILT - skin temperature (K)
!
!****************************************************************
IMPLICIT NONE
!-----------------------------------------------------------------
!--- input variables
INTEGER, INTENT(IN ) :: nroot,ktau,nzs , &
nddzs !nddzs=2*(nzs-2)
INTEGER, INTENT(IN ) :: i,j,iland,isoil
REAL, INTENT(IN ) :: DELT,CONFLX,PRCPMS, RAINF
REAL, INTENT(INOUT) :: DRYCAN,WETCAN,TRANSUM
!--- 3-D Atmospheric variables
REAL, &
INTENT(IN ) :: PATM, &
QVATM, &
QCATM
!--- 2-D variables
REAL , &
INTENT(IN ) :: &
EMISS, &
RHO, &
RNET, &
PC, &
VEGFRAC, &
DEW, &
QKMS, &
TKMS
!--- soil properties
REAL , &
INTENT(IN ) :: &
BCLH, &
DQM, &
QMIN
REAL, INTENT(IN ) :: CP, &
CVW, &
XLV, &
STBOLT, &
TABS, &
G0_P
REAL, DIMENSION(1:NZS), INTENT(IN) :: ZSMAIN, &
ZSHALF, &
THDIF, &
CAP
REAL, DIMENSION(1:NDDZS), INTENT(IN) :: DTDZS
REAL, DIMENSION(1:4001), INTENT(IN) :: TBQ
!--- input/output variables
!-------- 3-d soil moisture and temperature
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: TSO
!-------- 2-d variables
REAL , &
INTENT(INOUT) :: &
MAVAIL, &
QVG, &
QSG, &
QCG, &
SOILT
!--- Local variables
REAL :: x,x1,x2,x4,dzstop,can,ft,sph , &
tn,trans,umveg,denom
REAL :: FKT,D1,D2,D9,D10,DID,R211,R21,R22,R6,R7,D11 , &
PI,H,FKQ,R210,AA,BB,PP,Q1,QS1,TS1,TQ2,TX2 , &
TDENOM
REAL :: C,CC,AA1,RHCS,H1
REAL, DIMENSION(1:NZS) :: cotso,rhtso
INTEGER :: nzs1,nzs2,k,k1,kn,kk
!-----------------------------------------------------------------
NZS1=NZS-1
NZS2=NZS-2
dzstop=1./(ZSMAIN(2)-ZSMAIN(1))
do k=1,nzs
cotso(k)=0.
rhtso(k)=0.
enddo
!******************************************************************************
! COEFFICIENTS FOR THOMAS ALGORITHM FOR TSO
!******************************************************************************
! did=2.*(ZSMAIN(nzs)-ZSHALF(nzs))
! h1=DTDZS(8)*THDIF(nzs-1)*(ZSHALF(nzs)-ZSHALF(nzs-1))/did
! cotso(1)=h1/(1.+h1)
! rhtso(1)=(tso(nzs)+h1*(tso(nzs-1)-tso(nzs)))/
! 1 (1.+h1)
cotso(1)=0.
rhtso(1)=TSO(NZS)
DO 33 K=1,NZS2
KN=NZS-K
K1=2*KN-3
X1=DTDZS(K1)*THDIF(KN-1)
X2=DTDZS(K1+1)*THDIF(KN)
FT=TSO(KN)+X1*(TSO(KN-1)-TSO(KN)) &
-X2*(TSO(KN)-TSO(KN+1))
DENOM=1.+X1+X2-X2*cotso(K)
cotso(K+1)=X1/DENOM
rhtso(K+1)=(FT+X2*rhtso(K))/DENOM
33 CONTINUE
!************************************************************************
!--- THE HEAT BALANCE EQUATION (Smirnova et al., 1996, EQ. 21,26)
RHCS=CAP(1)
H=MAVAIL
IF(DEW.NE.0.)THEN
DRYCAN=0.
WETCAN=1.
ENDIf
TRANS=PC*TRANSUM*DRYCAN/ZSHALF(NROOT+1)
CAN=WETCAN+TRANS
UMVEG=1.-VEGFRAC
FKT=TKMS
D1=cotso(NZS1)
D2=rhtso(NZS1)
TN=SOILT
D9=THDIF(1)*RHCS*dzstop
D10=TKMS*CP*RHO
R211=.5*CONFLX/DELT
R21=R211*CP*RHO
R22=.5/(THDIF(1)*DELT*dzstop**2)
R6=EMISS *STBOLT*.5*TN**4
R7=R6/TN
D11=RNET+R6
TDENOM=D9*(1.-D1+R22)+D10+R21+R7 &
+RAINF*CVW*PRCPMS
FKQ=QKMS*RHO
R210=R211*RHO
C=VEGFRAC*FKQ*CAN
CC=C*XLV/TDENOM
AA=XLV*(FKQ*UMVEG+R210)/TDENOM
BB=(D10*TABS+R21*TN+XLV*(QVATM* &
(FKQ*UMVEG+C) &
+R210*QVG)+D11+D9*(D2+R22*TN) &
+RAINF*CVW*PRCPMS*max(273.15,TABS) &
)/TDENOM
AA1=AA+CC
PP=PATM*1.E3
AA1=AA1/PP
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
PRINT *,' VILKA-1'
print *,'D10,TABS,R21,TN,QVATM,FKQ,UMVEG,VEGFRAC,CAN', &
D10,TABS,R21,TN,QVATM,FKQ,UMVEG,VEGFRAC,CAN
print *,'RNET, EMISS, STBOLT, SOILT',RNET, EMISS, STBOLT, SOILT
print *,'R210,QVG,D11,D9,D2,R22,RAINF,CVW,PRCPMS,TDENOM', &
R210,QVG,D11,D9,D2,R22,RAINF,CVW,PRCPMS,TDENOM
print *,'tn,aa1,bb,pp,umveg,fkq,r210,vegfrac', &
tn,aa1,bb,pp,umveg,fkq,r210,vegfrac
ENDIF
CALL VILKA(TN,AA1,BB,PP,QS1,TS1,TBQ,KTAU,i,j,iland,isoil)
TQ2=QVATM+QCATM
TX2=TQ2*(1.-H)
Q1=TX2+H*QS1
IF(Q1.LT.QS1) GOTO 100
!--- if no saturation - goto 100
!--- if saturation - goto 90
90 QVG=QS1
QSG=QS1
TSO(1)=TS1
QCG=Q1-QS1
GOTO 200
100 BB=BB-AA*TX2
AA=(AA*H+CC)/PP
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
PRINT *,' VILKA-2'
print *,'D10,TABS,R21,TN,QVATM,FKQ,UMVEG,VEGFRAC,CAN', &
D10,TABS,R21,TN,QVATM,FKQ,UMVEG,VEGFRAC,CAN
print *,'R210,QVG,D11,D9,D2,R22,RAINF,CVW,PRCPMS,TDENOM', &
R210,QVG,D11,D9,D2,R22,RAINF,CVW,PRCPMS,TDENOM
print *,'tn,aa1,bb,pp,umveg,fkq,r210,vegfrac', &
tn,aa1,bb,pp,umveg,fkq,r210,vegfrac
ENDIF
CALL VILKA(TN,AA,BB,PP,QS1,TS1,TBQ,KTAU,i,j,iland,isoil)
Q1=TX2+H*QS1
IF(Q1.GT.QS1) GOTO 90
QSG=QS1
QVG=Q1
TSO(1)=TS1
QCG=0.
200 CONTINUE
!--- SOILT - skin temperature
SOILT=TS1
!---- Final solution for soil temperature - TSO
DO K=2,NZS
KK=NZS-K+1
TSO(K)=rhtso(KK)+cotso(KK)*TSO(K-1)
END DO
! return
! end
!--------------------------------------------------------------------
END SUBROUTINE SOILTEMP
!--------------------------------------------------------------------
SUBROUTINE SNOWTEMP (docs) ( & 1,2
!--- input variables
i,j,iland,isoil, &
delt,ktau,conflx,nzs,nddzs,nroot, &
snwe,snwepr,snhei,newsnow,snowfrac, &
beta,deltsn,snth,rhosn, &
PRCPMS,RAINF, &
PATM,TABS,QVATM,QCATM, &
GLW,GSW,EMISS,RNET, &
QKMS,TKMS,PC,RHO,VEGFRAC, &
THDIF,CAP,DRYCAN,WETCAN,CST, &
TRANF,TRANSUM,DEW,MAVAIL, &
!--- soil fixed fields
DQM,QMIN,PSIS,BCLH, &
ZSMAIN,ZSHALF,DTDZS,TBQ, &
!--- constants
XLVM,CP,G0_P,CVW,STBOLT, &
!--- output variables
SNWEPRINT,SNHEIPRINT,RSM, &
TSO,SOILT,SOILT1,TSNAV,QVG,QSG,QCG, &
SMELT,SNOH,SNFLX,ILNB)
!********************************************************************
! Energy budget equation and heat diffusion eqn are
! solved here to obtain snow and soil temperatures
!
! DELT - time step (s)
! ktau - numver of time step
! CONFLX - depth of constant flux layer (m)
! IME, JME, KME, NZS - dimensions of the domain
! NROOT - number of levels within the root zone
! PRCPMS - precipitation rate in m/s
! COTSO, RHTSO - coefficients for implicit solution of
! heat diffusion equation
! THDIF - thermal diffusivity (W/m/K)
! QSG,QVG,QCG - saturated mixing ratio, mixing ratio of
! water vapor and cloud at the ground
! surface, respectively (kg/kg)
! PATM - pressure [bar]
! QCATM,QVATM - cloud and water vapor mixing ratio
! at the first atm. level (kg/kg)
! EMISS,RNET - emissivity (0-1) of the ground surface and net
! radiation at the surface (W/m^2)
! QKMS - exchange coefficient for water vapor in the
! surface layer (m/s)
! TKMS - exchange coefficient for heat in the surface
! layer (m/s)
! PC - plant coefficient (resistance)
! RHO - density of atmosphere near surface (kg/m^3)
! VEGFRAC - greeness fraction (0-1)
! CAP - volumetric heat capacity (J/m^3/K)
! DRYCAN - dry fraction of vegetated area where
! transpiration may take place (0-1)
! WETCAN - fraction of vegetated area covered by canopy
! water (0-1)
! TRANSUM - transpiration function integrated over the
! rooting zone (m)
! DEW - dew in kg/m^2/s
! MAVAIL - fraction of maximum soil moisture in the top
! layer (0-1)
! ZSMAIN - main levels in soil (m)
! ZSHALF - middle of the soil layers (m)
! DTDZS - dt/(2.*dzshalf*dzmain)
! TBQ - table to define saturated mixing ration
! of water vapor for given temperature and pressure
! TSO - soil temperature (K)
! SOILT - skin temperature (K)
!
!*********************************************************************
IMPLICIT NONE
!---------------------------------------------------------------------
!--- input variables
INTEGER, INTENT(IN ) :: nroot,ktau,nzs , &
nddzs !nddzs=2*(nzs-2)
INTEGER, INTENT(IN ) :: i,j,iland,isoil
REAL, INTENT(IN ) :: DELT,CONFLX,PRCPMS , &
RAINF,NEWSNOW,DELTSN,SNTH , &
TABS,TRANSUM,SNWEPR
!--- 3-D Atmospheric variables
REAL, &
INTENT(IN ) :: PATM, &
QVATM, &
QCATM
!--- 2-D variables
REAL , &
INTENT(IN ) :: GLW, &
GSW, &
RHO, &
PC, &
VEGFRAC, &
QKMS, &
TKMS
!--- soil properties
REAL , &
INTENT(IN ) :: &
BCLH, &
DQM, &
PSIS, &
QMIN
REAL, INTENT(IN ) :: CP, &
CVW, &
STBOLT, &
XLVM, &
G0_P
REAL, DIMENSION(1:NZS), INTENT(IN) :: ZSMAIN, &
ZSHALF, &
THDIF, &
CAP, &
TRANF
REAL, DIMENSION(1:NDDZS), INTENT(IN) :: DTDZS
REAL, DIMENSION(1:4001), INTENT(IN) :: TBQ
!--- input/output variables
!-------- 3-d soil moisture and temperature
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: TSO
!-------- 2-d variables
REAL , &
INTENT(INOUT) :: DEW, &
CST, &
RHOSN, &
EMISS, &
MAVAIL, &
QVG, &
QSG, &
QCG, &
SNWE, &
SNHEI, &
SNOWFRAC, &
SMELT, &
SNOH, &
SNFLX, &
SOILT, &
SOILT1, &
TSNAV
REAL, INTENT(INOUT) :: DRYCAN, WETCAN
REAL, INTENT(OUT) :: RSM, &
SNWEPRINT, &
SNHEIPRINT
INTEGER, INTENT(OUT) :: ilnb
!--- Local variables
INTEGER :: nzs1,nzs2,k,k1,kn,kk
REAL :: x,x1,x2,x4,dzstop,can,ft,sph, &
tn,trans,umveg,denom
REAL :: cotsn,rhtsn,xsn1,ddzsn1,x1sn1,ftsnow,denomsn
REAL :: t3,upflux,xinet,ras, &
xlmelt,rhocsn,thdifsn, &
beta,epot,xsn,ddzsn,x1sn,d1sn,d2sn,d9sn,r22sn
REAL :: fso,fsn, &
FKT,D1,D2,D9,D10,DID,R211,R21,R22,R6,R7,D11, &
PI,H,FKQ,R210,AA,BB,PP,Q1,QS1,TS1,TQ2,TX2, &
TDENOM,C,CC,AA1,RHCS,H1, &
tsob, snprim, sh1, sh2, &
smeltg,snohg,snodif,soh, &
CMC2MS,TNOLD,QGOLD,SNOHGNEW
REAL, DIMENSION(1:NZS) :: transp,cotso,rhtso
REAL :: edir1, &
ec1, &
ett1, &
eeta, &
s, &
qfx, &
hfx
REAL :: RNET,rsmfrac,soiltfrac,hsn
!-----------------------------------------------------------------
do k=1,nzs
transp (k)=0.
cotso (k)=0.
rhtso (k)=0.
enddo
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *, 'SNOWTEMP: SNHEI,SNTH,SOILT1: ',SNHEI,SNTH,SOILT1,soilt
ENDIF
XLMELT=3.335E+5
RHOCSN=2090.* RHOSN
THDIFSN = 0.265/RHOCSN
RAS=RHO*1.E-3
SOILTFRAC=SOILT
SMELT=0.
SOH=0.
SMELTG=0.
SNOHG=0.
SNODIF=0.
RSM = 0.
RSMFRAC = 0.
fsn=1.
fso=0.
hsn=snhei
NZS1=NZS-1
NZS2=NZS-2
QGOLD=QVG
TNOLD=SOILT
DZSTOP=1./(ZSMAIN(2)-ZSMAIN(1))
!******************************************************************************
! COEFFICIENTS FOR THOMAS ALGORITHM FOR TSO
!******************************************************************************
! did=2.*(ZSMAIN(nzs)-ZSHALF(nzs))
! h1=DTDZS(8)*THDIF(nzs-1)*(ZSHALF(nzs)-ZSHALF(nzs-1))/did
! cotso(1)=h1/(1.+h1)
! rhtso(1)=(tso(nzs)+h1*(tso(nzs-1)-tso(nzs)))/
! 1 (1.+h1)
cotso(1)=0.
rhtso(1)=TSO(NZS)
DO 33 K=1,NZS2
KN=NZS-K
K1=2*KN-3
X1=DTDZS(K1)*THDIF(KN-1)
X2=DTDZS(K1+1)*THDIF(KN)
FT=TSO(KN)+X1*(TSO(KN-1)-TSO(KN)) &
-X2*(TSO(KN)-TSO(KN+1))
DENOM=1.+X1+X2-X2*cotso(K)
cotso(K+1)=X1/DENOM
rhtso(K+1)=(FT+X2*rhtso(K))/DENOM
33 CONTINUE
!--- THE NZS element in COTSO and RHTSO will be for snow
!--- There will be 2 layers in snow if it is deeper than DELTSN+SNTH
IF(SNHEI.GE.SNTH) then
! if(snhei.le.DELTSN+DELTSN) then
if(snhei.le.DELTSN+SNTH) then
!-- 1-layer snow model
ilnb=1
snprim=snhei
soilt1=tso(1)
tsob=tso(1)
XSN = DELT/2./(zshalf(2)+0.5*SNPRIM)
DDZSN = XSN / SNPRIM
X1SN = DDZSN * thdifsn
X2 = DTDZS(1)*THDIF(1)
FT = TSO(1)+X1SN*(SOILT-TSO(1)) &
-X2*(TSO(1)-TSO(2))
DENOM = 1. + X1SN + X2 -X2*cotso(NZS1)
cotso(NZS)=X1SN/DENOM
rhtso(NZS)=(FT+X2*rhtso(NZS1))/DENOM
cotsn=cotso(NZS)
rhtsn=rhtso(NZS)
!*** Average temperature of snow pack (C)
tsnav=0.5*(soilt+tso(1)) &
-273.15
else
!-- 2 layers in snow, SOILT1 is temperasture at DELTSN depth
ilnb=2
snprim=deltsn
tsob=soilt1
XSN = DELT/2./(0.5*SNHEI)
XSN1= DELT/2./(zshalf(2)+0.5*(SNHEI-DELTSN))
DDZSN = XSN / DELTSN
DDZSN1 = XSN1 / (SNHEI-DELTSN)
X1SN = DDZSN * thdifsn
X1SN1 = DDZSN1 * thdifsn
X2 = DTDZS(1)*THDIF(1)
FT = TSO(1)+X1SN1*(SOILT1-TSO(1)) &
-X2*(TSO(1)-TSO(2))
DENOM = 1. + X1SN1 + X2 - X2*cotso(NZS1)
cotso(nzs)=x1sn1/denom
rhtso(nzs)=(ft+x2*rhtso(nzs1))/denom
ftsnow = soilt1+x1sn*(soilt-soilt1) &
-x1sn1*(soilt1-tso(1))
denomsn = 1. + X1SN + X1SN1 - X1SN1*cotso(NZS)
cotsn=x1sn/denomsn
rhtsn=(ftsnow+X1SN1*rhtso(NZS))/denomsn
!*** Average temperature of snow pack (C)
tsnav=0.5/snhei*((soilt+soilt1)*deltsn &
+(soilt1+tso(1))*(SNHEI-DELTSN)) &
-273.15
endif
ENDIF
IF(SNHEI.LT.SNTH.AND.SNHEI.GT.0.) then
!--- snow is too thin to be treated separately, therefore it
!--- is combined with the first soil layer.
fsn=SNHEI/(SNHEI+zsmain(2))
fso=1.-fsn
soilt1=tso(1)
tsob=tso(2)
snprim=SNHEI+zsmain(2)
XSN = DELT/2./((zshalf(3)-zsmain(2))+0.5*snprim)
DDZSN = XSN /snprim
X1SN = DDZSN * (fsn*thdifsn+fso*thdif(1))
X2=DTDZS(2)*THDIF(2)
FT=TSO(2)+X1SN*(SOILT-TSO(2))- &
X2*(TSO(2)-TSO(3))
denom = 1. + x1sn + x2 - x2*cotso(nzs-2)
cotso(nzs1) = x1sn/denom
rhtso(nzs1)=(FT+X2*rhtso(NZS-2))/denom
tsnav=0.5*(soilt+tso(1)) &
-273.15
ENDIF
!************************************************************************
!--- THE HEAT BALANCE EQUATION (Smirnova et al. 1996, EQ. 21,26)
ETT1=0.
EPOT=-QKMS*(QVATM-QSG)
RHCS=CAP(1)
H=MAVAIL
IF(DEW.NE.0.)THEN
DRYCAN=0.
WETCAN=1.
ENDIF
TRANS=PC*TRANSUM*DRYCAN/ZSHALF(NROOT+1)
CAN=WETCAN+TRANS
UMVEG=1.-VEGFRAC
FKT=TKMS
D1=cotso(NZS1)
D2=rhtso(NZS1)
TN=SOILT
D9=THDIF(1)*RHCS*dzstop
D10=TKMS*CP*RHO
R211=.5*CONFLX/DELT
R21=R211*CP*RHO
R22=.5/(THDIF(1)*DELT*dzstop**2)
R6=EMISS *STBOLT*.5*TN**4
R7=R6/TN
D11=RNET+R6
IF(SNHEI.GE.SNTH) THEN
! if(snhei.le.DELTSN+DELTSN) then
if(snhei.le.DELTSN+SNTH) then
!--- 1-layer snow
D1SN = cotso(NZS)
D2SN = rhtso(NZS)
else
!--- 2-layer snow
D1SN = cotsn
D2SN = rhtsn
endif
D9SN= THDIFSN*RHOCSN / SNPRIM
R22SN = SNPRIM*SNPRIM*0.5/(THDIFSN*DELT)
ENDIF
IF(SNHEI.LT.SNTH.AND.SNHEI.GT.0.) then
!--- thin snow is combined with soil
D1SN = D1
D2SN = D2
D9SN = (fsn*THDIFSN*RHOCSN+fso*THDIF(1)*RHCS)/ &
snprim
R22SN = snprim*snprim*0.5 &
/((fsn*THDIFSN+fso*THDIF(1))*delt)
ENDIF
IF(SNHEI.eq.0.)then
!--- all snow is sublimated
D9SN = D9
R22SN = R22
D1SN = D1
D2SN = D2
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' SNHEI = 0, D9SN,R22SN,D1SN,D2SN: ',D9SN,R22SN,D1SN,D2SN
ENDIF
ENDIF
!---- TDENOM for snow
TDENOM = D9SN*(1.-D1SN +R22SN)+D10+R21+R7 &
+RAINF*CVW*PRCPMS &
+RHOCSN*NEWSNOW/DELT
FKQ=QKMS*RHO
R210=R211*RHO
C=VEGFRAC*FKQ*CAN
CC=C*XLVM/TDENOM
AA=XLVM*(BETA*FKQ*UMVEG+R210)/TDENOM
BB=(D10*TABS+R21*TN+XLVM*(QVATM* &
(BETA*FKQ*UMVEG+C) &
+R210*QVG)+D11+D9SN*(D2SN+R22SN*TN) &
+RAINF*CVW*PRCPMS*max(273.15,TABS) &
+ RHOCSN*NEWSNOW/DELT*min(273.15,TABS) &
)/TDENOM
AA1=AA+CC
PP=PATM*1.E3
AA1=AA1/PP
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,'VILKA-SNOW'
print *,'tn,aa1,bb,pp,umveg,fkq,r210,vegfrac', &
tn,aa1,bb,pp,umveg,fkq,r210,vegfrac
ENDIF
CALL VILKA(TN,AA1,BB,PP,QS1,TS1,TBQ,KTAU,i,j,iland,isoil)
TQ2=QVATM+QCATM
TX2=TQ2*(1.-H)
Q1=TX2+H*QS1
!--- it is saturation over snow
90 QVG=QS1
QSG=QS1
QCG=Q1-QS1
!--- SOILT - skin temperature
SOILT=TS1
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *,' AFTER VILKA-SNOW'
print *,' TS1,QS1: ', ts1,qs1
ENDIF
! Solution for temperature at 7.5 cm depth and snow-soil interface
IF(SNHEI.GE.SNTH) THEN
! if(snhei.gt.DELTSN+DELTSN) then
if(snhei.gt.DELTSN+SNTH) then
!-- 2-layer snow model
SOILT1=rhtsn+cotsn*SOILT
TSO(1)=rhtso(NZS)+cotso(NZS)*SOILT1
tsob=soilt1
else
!-- 1 layer in snow
TSO(1)=rhtso(NZS)+cotso(NZS)*SOILT
SOILT1=TSO(1)
tsob=tso(1)
endif
ELSE
!-- all snow is evaporated
TSO(1)=SOILT
SOILT1=SOILT
tsob=SOILT
ENDIF
!---- Final solution for TSO
DO K=2,NZS
KK=NZS-K+1
TSO(K)=rhtso(KK)+cotso(KK)*TSO(K-1)
END DO
!--- For thin snow layer combined with the top soil layer
!--- TSO is computed by linear inmterpolation between SOILT
!--- and TSO(2)
if(SNHEI.LT.SNTH.AND.SNHEI.GT.0.)then
tso(1)=tso(2)+(soilt-tso(2))*fso
SOILT1=TSO(1)
tsob=tso(2)
!!! tsob=tso(1)
endif
!--- IF SOILT > 273.15 F then melting of snow can happen
IF(SOILT.GE.273.15.AND.SNHEI.GT.0.) THEN
!!! SOILT=273.15
soiltfrac=snowfrac*273.15+(1.-snowfrac)*SOILT
soilt=soiltfrac
QSG= QSN(soilt,TBQ)/PP
!!! QSG= QSN(273.15,TBQ)/PP
QVG=QSG
T3 = STBOLT*SOILT*SOILT*SOILT
UPFLUX = T3 * SOILT
XINET = EMISS*(GLW-UPFLUX)
RNET = GSW + XINET
EPOT = -QKMS*(QVATM-QSG)
Q1=EPOT*RAS
IF (Q1.LE.0.) THEN
! --- condensation
DEW=-EPOT
DO K=1,NZS
TRANSP(K)=0.
ENDDO
QFX= XLVM*RHO*DEW
EETA=QFX/XLVM
ELSE
! --- evaporation
DO K=1,NROOT
TRANSP(K)=-VEGFRAC*q1 &
*PC*TRANF(K)*DRYCAN/zshalf(NROOT+1)
IF(TRANSP(K).GT.0.) TRANSP(K)=0.
ETT1=ETT1-TRANSP(K)
ENDDO
DO k=nroot+1,nzs
transp(k)=0.
enddo
EDIR1 = Q1*UMVEG * BETA
EC1 = Q1 * WETCAN *VEGFRAC
CMC2MS=CST/DELT
EC1=MIN(CMC2MS,EC1)
EETA = (EDIR1 + EC1 + ETT1)*1.E3
! to convert from kg m-2 s-1 to m s-1: 1/rho water=1.e-3************
QFX= - XLVM * EETA
ENDIF
HFX=D10*(TABS-soilt)
!!! HFX=D10*(TABS-273.15)
IF(SNHEI.GE.SNTH)then
SOH=thdifsn*RHOCSN*(soilt-TSOB)/SNPRIM
! SOH=thdifsn*RHOCSN*(273.15-TSOB)/SNPRIM
SNFLX=SOH
ELSE
SOH=(fsn*thdifsn*rhocsn+fso*thdif(1)*rhcs)* &
(soilt-TSOB)/snprim
!!! (273.15-TSOB)/snprim
SNFLX=SOH
ENDIF
X= (R21+D9SN*R22SN)*(soilt-TNOLD) + &
!!! X= (R21+D9SN*R22SN)*(273.15-TNOLD) + &
XLVM*R210*(QSG-QGOLD)
!-- SNOH is energy flux of snow phase change
SNOH=RNET+QFX +HFX &
+RHOCSN*NEWSNOW/DELT*(min(273.15,TABS)-TN) &
-SOH-X+RAINF*CVW*PRCPMS* &
(max(273.15,TABS)-TN)
SNOH=AMAX1(0.,SNOH)
!-- SMELT is speed of melting in M/S
SMELT= SNOH /XLMELT*1.E-3
SMELT=AMIN1(SMELT,SNWEPR/DELT-BETA*EPOT*RAS)
! SMELT=AMIN1(SMELT,SNWEPR/DELT-BETA*EPOT*RAS*UMVEG)
SNOHGNEW=SMELT*XLMELT*1.E3
SNODIF=AMAX1(0.,(SNOH-SNOHGNEW))
SNOH=SNOHGNEW
! SNOHSMELT*XLMELT*1.E3
!*** From Koren et al. (1999) 13% of snow melt stays in the snow pack
!!! rsm=0.13*smelt*delt
if(snwe.gt.0.) then
rsmfrac=min(0.18,(max(0.08,0.10/snwe*0.13)))
else
rsmfrac=0.13
endif
rsm=rsmfrac*smelt*delt
SMELT=SMELT-rsm/delt
!-- correction of liquid equivalent of snow depth
!-- due to evaporation and snow melt
SNWE = AMAX1(0.,(SNWEPR- &
(SMELT+BETA*EPOT*RAS)*DELT &
! (SMELT+BETA*EPOT*RAS*UMVEG)*DELT &
) )
!--- If all snow melts, then 13% of snow melt we kept in the
!--- snow pack should be added back to snow melt and infiltrate
!--- into soil.
if(snwe.le.rsm) then
smelt=smelt+rsm/delt
snwe=0.
rsm=0.
SOILT=SNODIF*DELT/RHCS*ZSHALF(2) &
+soiltfrac
!!! +273.15
else
!*** Correct snow density on effect of snow melt, melted
!*** from the top of the snow. 13% of melted water
!*** remains in the pack and changes its density.
!*** Eq. 9 (with my correction) in Koren et al. (1999)
if(snwe.gt.snth*rhosn*1.e-3) then
xsn=(rhosn*(snwe-rsm)+1.e3*rsm)/ &
snwe
rhosn=MIN(XSN,400.)
RHOCSN=2090.* RHOSN
thdifsn = 0.265/RHOCSN
endif
SOILT=SOILTFRAC
endif
!--- If there is no snow melting then just evaporation
!--- or condensation cxhanges SNWE
ELSE
EPOT=-QKMS*(QVATM-QSG)
SNWE = AMAX1(0.,(SNWEPR- &
BETA*EPOT*RAS*DELT))
! BETA*EPOT*RAS*UMVEG*DELT))
ENDIF
!*** Correct snow density on effect of snow melt, melted
!*** from the top of the snow. 13% of melted water
!*** remains in the pack and changes its density.
!*** Eq. 9 (with my correction) in Koren et al. (1999)
SNHEI=SNWE *1.E3 / RHOSN
!-- Snow melt from the top is done. But if ground surface temperature
!-- is above freezing snow can melt from the bottom. The following
!-- piece of code will check if bottom melting is possible.
IF(TSO(1).GE.273.15.AND.SNHEI.GT.0.) THEN
soiltfrac=snowfrac*273.15+(1.-snowfrac)*TSO(1)
SNOHG=(TSO(1)-soiltfrac)*(RHCS*zshalf(2)+ &
RHOCSN*0.5*SNHEI) / DELT
SNOHG=AMAX1(0.,SNOHG)
SNODIF=0.
! TSO(1)=273.15
SMELTG=SNOHG/XLMELT*1.E-3
! SMELTG=AMIN1(SMELTG,SNWE/DELT)
if(SNWE-SMELTG*DELT.ge.rsm) then
! SNWE = SNWE-SMELTG*DELT
SNWE = AMAX1(0.,SNWE-SMELTG*DELT)
else
smeltg=snwe/delt
snwe=0.
rsm=0.
endif
SNOHGNEW=SMELTG*XLMELT*1.e3
SNODIF=AMAX1(0.,(SNOHG-SNOHGNEW))
TSO(1)=soiltfrac
if(snwe.eq.0.)then
TSO(1)=SNODIF*DELT/RHCS*zshalf(2) + soiltfrac
!!! TSO(1)=SNODIF*DELT/RHCS*zshalf(2) + 273.15
endif
SMELT=SMELT+SMELTG
SNOH=SNOH+SNOHGNEW
ENDIF
SNHEI=SNWE *1.E3 / RHOSN
snweprint=snwe
! &
!--- if VEGFRAC.ne.0. then some snow stays on the canopy
!--- and should be added to SNWE for water conservation
! 4 Nov 07 +VEGFRAC*cst
snheiprint=snweprint*1.E3 / RHOSN
IF ( wrf_at_debug_level(LSMRUC_DBG_LVL) ) THEN
print *, 'snweprint : ',snweprint
print *, 'D9SN,SOILT,TSOB : ', D9SN,SOILT,TSOB
ENDIF
!--- Compute flux in the top snow layer
SNFLX=D9SN*(SOILT-TSOB)
IF(SNHEI.GT.0.) THEN
if(ilnb.gt.1) then
tsnav=0.5/snhei*((soilt+soilt1)*deltsn &
+(soilt1+tso(1))*(SNHEI-DELTSN)) &
-273.15
else
tsnav=0.5*(soilt+tso(1)) - 273.15
endif
ENDIF
! return
! end
!------------------------------------------------------------------------
END SUBROUTINE SNOWTEMP
!------------------------------------------------------------------------
SUBROUTINE SOILMOIST (docs) ( & 2
!--input parameters
DELT,NZS,NDDZS,DTDZS,DTDZS2, &
ZSMAIN,ZSHALF,DIFFU,HYDRO, &
QSG,QVG,QCG,QCATM,QVATM,PRCP, &
QKMS,TRANSP,DRIP, &
DEW,SMELT,SOILICE,VEGFRAC, &
!--soil properties
DQM,QMIN,REF,KSAT,RAS,INFMAX, &
!--output
SOILMOIS,MAVAIL,RUNOFF,RUNOFF2,INFILTRP)
!*************************************************************************
! moisture balance equation and Richards eqn.
! are solved here
!
! DELT - time step (s)
! IME,JME,NZS - dimensions of soil domain
! ZSMAIN - main levels in soil (m)
! ZSHALF - middle of the soil layers (m)
! DTDZS - dt/(2.*dzshalf*dzmain)
! DTDZS2 - dt/(2.*dzshalf)
! DIFFU - diffusional conductivity (m^2/s)
! HYDRO - hydraulic conductivity (m/s)
! QSG,QVG,QCG - saturated mixing ratio, mixing ratio of
! water vapor and cloud at the ground
! surface, respectively (kg/kg)
! QCATM,QVATM - cloud and water vapor mixing ratio
! at the first atm. level (kg/kg)
! PRCP - precipitation rate in m/s
! QKMS - exchange coefficient for water vapor in the
! surface layer (m/s)
! TRANSP - transpiration from the soil layers (m/s)
! DRIP - liquid water dripping from the canopy to soil (m)
! DEW - dew in kg/m^2s
! SMELT - melting rate in m/s
! SOILICE - volumetric content of ice in soil (m^3/m^3)
! VEGFRAC - greeness fraction (0-1)
! RAS - ration of air density to soil density
! INFMAX - maximum infiltration rate (kg/m^2/s)
!
! SOILMOIS - volumetric soil moisture, 6 levels (m^3/m^3)
! MAVAIL - fraction of maximum soil moisture in the top
! layer (0-1)
! RUNOFF - surface runoff (m/s)
! RUNOFF2 - underground runoff (m)
! INFILTRP - point infiltration flux into soil (m/s)
! /(snow bottom runoff) (mm/s)
!
! COSMC, RHSMC - coefficients for implicit solution of
! Richards equation
!******************************************************************
IMPLICIT NONE
!------------------------------------------------------------------
!--- input variables
REAL, INTENT(IN ) :: DELT
INTEGER, INTENT(IN ) :: NZS,NDDZS
! input variables
REAL, DIMENSION(1:NZS), INTENT(IN ) :: ZSMAIN, &
ZSHALF, &
DIFFU, &
HYDRO, &
TRANSP, &
SOILICE, &
DTDZS2
REAL, DIMENSION(1:NDDZS), INTENT(IN) :: DTDZS
REAL, INTENT(IN ) :: QSG,QVG,QCG,QCATM,QVATM , &
QKMS,VEGFRAC,DRIP,PRCP , &
DEW,SMELT , &
DQM,QMIN,REF,KSAT,RAS
! output
REAL, DIMENSION( 1:nzs ) , &
INTENT(INOUT) :: SOILMOIS
REAL, INTENT(INOUT) :: MAVAIL,RUNOFF,RUNOFF2,INFILTRP, &
INFMAX
! local variables
REAL, DIMENSION( 1:nzs ) :: COSMC,RHSMC
REAL :: DZS,R1,R2,R3,R4,R5,R6,R7,R8,R9,R10
REAL :: REFKDT,REFDK,DELT1,F1MAX,F2MAX
REAL :: F1,F2,FD,KDT,VAL,DDT,PX
REAL :: QQ,UMVEG,INFMAX1,TRANS
REAL :: TOTLIQ,FLX,FLXSAT,QTOT
REAL :: DID,X1,X2,X4,DENOM,Q2,Q4
REAL :: dice,fcr,acrt,frzx,sum,cvfrz
INTEGER :: NZS1,NZS2,K,KK,K1,KN,ialp1,jj,jk
!******************************************************************************
! COEFFICIENTS FOR THOMAS ALGORITHM FOR SOILMOIS
!******************************************************************************
NZS1=NZS-1
NZS2=NZS-2
118 format(6(10Pf23.19))
do k=1,nzs
cosmc(k)=0.
rhsmc(k)=0.
enddo
DID=(ZSMAIN(NZS)-ZSHALF(NZS))*2.
X1=ZSMAIN(NZS)-ZSMAIN(NZS1)
! DENOM=DID/DELT+DIFFU(NZS1)/X1
! COSMC(1)=DIFFU(NZS1)/X1/DENOM
! RHSMC(1)=(SOILMOIS(NZS)*DID/DELT
! 1 +TRANSP(NZS)-(HYDRO(NZS)*SOILMOIS(NZS)
! 1 -HYDRO(NZS1)*SOILMOIS(NZS1))*DID
! 1 /X1) /DENOM
DENOM=(1.+DIFFU(nzs1)/X1/DID*DELT+HYDRO(NZS)/(2.*DID)*DELT)
COSMC(1)=DELT*(DIFFU(nzs1)/DID/X1 &
+HYDRO(NZS1)/2./DID)/DENOM
RHSMC(1)=(SOILMOIS(NZS)+TRANSP(NZS)*DELT/ &
DID)/DENOM
DO 330 K=1,NZS2
KN=NZS-K
K1=2*KN-3
X4=2.*DTDZS(K1)*DIFFU(KN-1)
X2=2.*DTDZS(K1+1)*DIFFU(KN)
Q4=X4+HYDRO(KN-1)*DTDZS2(KN-1)
Q2=X2-HYDRO(KN+1)*DTDZS2(KN-1)
DENOM=1.+X2+X4-Q2*COSMC(K)
COSMC(K+1)=Q4/DENOM
330 RHSMC(K+1)=(SOILMOIS(KN)+Q2*RHSMC(K) &
+TRANSP(KN) &
/(ZSHALF(KN+1)-ZSHALF(KN)) &
*DELT)/DENOM
! --- MOISTURE BALANCE BEGINS HERE
TRANS=TRANSP(1)
UMVEG=1.-VEGFRAC
RUNOFF=0.
RUNOFF2=0.
DZS=ZSMAIN(2)
R1=COSMC(NZS1)
R2= RHSMC(NZS1)
R3=DIFFU(1)/DZS
R4=R3+HYDRO(1)*.5
R5=R3-HYDRO(2)*.5
R6=QKMS*RAS
!-- Total liquid water available on the top of soil domain
!-- Without snow - 3 sources of water: precipitation,
!-- water dripping from the canopy and dew
!-- With snow - only one source of water - snow melt
! print *,'PRCP,DRIP,DEW,umveg,ras,smelt',
! 1 PRCP,DRIP,DEW,umveg,ras,smelt
! if (drip.ne.0.) then
! print *,'DRIP non-zero'
! write(6,191) drip
! write (6,191)soilmois(1)
! write (6,191)soilmois(2)
! endif
191 format (f23.19)
TOTLIQ=UMVEG*PRCP-DRIP/DELT-UMVEG*DEW*RAS-SMELT
FLX=TOTLIQ
INFILTRP=TOTLIQ
! ----------- FROZEN GROUND VERSION -------------------------
! REFERENCE FROZEN GROUND PARAMETER, CVFRZ, IS A SHAPE PARAMETER OF
! AREAL DISTRIBUTION FUNCTION OF SOIL ICE CONTENT WHICH EQUALS 1/CV.
! CV IS A COEFFICIENT OF SPATIAL VARIATION OF SOIL ICE CONTENT.
! BASED ON FIELD DATA CV DEPENDS ON AREAL MEAN OF FROZEN DEPTH, AND IT
! CLOSE TO CONSTANT = 0.6 IF AREAL MEAN FROZEN DEPTH IS ABOVE 20 CM.
! THAT IS WHY PARAMETER CVFRZ = 3 (INT{1/0.6*0.6})
!
! Current logic doesn't allow CVFRZ be bigger than 3
CVFRZ = 3.
!-- SCHAAKE/KOREN EXPRESSION for calculation of max infiltration
REFKDT=3.
REFDK=3.4341E-6
DELT1=DELT/86400.
F1MAX=DQM*ZSHALF(2)
F2MAX=DQM*(ZSHALF(3)-ZSHALF(2))
F1=F1MAX*(1.-SOILMOIS(1)/DQM)
F2=F2MAX*(1.-SOILMOIS(2)/DQM)
FD=F1+F2
KDT=REFKDT*KSAT/REFDK
VAL=(1.-EXP(-KDT*DELT1))
DDT = FD*VAL
PX= - TOTLIQ * DELT
IF(PX.LT.0.0) PX = 0.0
if(ddt.eq.0.) then
infmax1=ksat
else
INFMAX1 = (PX*(DDT/(PX+DDT)))/DELT
INFMAX1 = MIN(INFMAX1, KSAT)
endif
! print *,'INFMAX1=,ksat',infmax1,ksat,f1,f2,kdt,val,ddt,px
! ----------- FROZEN GROUND VERSION --------------------------
! REDUCTION OF INFILTRATION BASED ON FROZEN GROUND PARAMETERS
!
! ------------------------------------------------------------------
DICE = soilice(1)*zshalf(2)
DO K=2,NZS1
DICE = DICE + ( ZSHALF(K+1) - ZSHALF(K) ) * soilice(k)
ENDDO
FRZX= 0.28*((dqm+qmin)/ref) * (0.400 / 0.482)
FCR = 1.
IF ( DICE .GT. 1.E-2) THEN
ACRT = CVFRZ * FRZX / DICE
SUM = 1.
IALP1 = CVFRZ - 1
DO JK = 1,IALP1
K = 1
DO JJ = JK+1, IALP1
K = K * JJ
END DO
SUM = SUM + (ACRT ** ( CVFRZ-JK)) / FLOAT (K)
END DO
FCR = 1. - EXP(-ACRT) * SUM
END IF
! print *,'FCR--------',fcr
INFMAX1 = INFMAX1* FCR
INFMAX1 = MIN(INFMAX1, KSAT)
! -------------------------------------------------------------------
INFMAX = MIN(INFMAX,INFMAX1)
!----
IF (-TOTLIQ.GE.INFMAX)THEN
RUNOFF=-TOTLIQ-INFMAX
FLX=-INFMAX
ENDIF
! INFILTRP is total infiltration flux in M/S
INFILTRP=FLX
! print *,'PRCIP',infiltrp,flx,infmax
! Solution of moisture budget
R7=.5*DZS/DELT
R4=R4+R7
FLX=FLX-SOILMOIS(1)*R7
R8=UMVEG*R6
QTOT=QVATM+QCATM
R9=TRANS
R10=QTOT-QSG
!-- evaporation regime
IF(R10.LE.0.) THEN
QQ=(R5*R2-FLX+R9)/(R4-R5*R1-R10*R8/(REF-QMIN))
FLXSAT=-DQM*(R4-R5*R1-R10*R8/(REF-QMIN)) &
+R5*R2+R9
ELSE
!-- dew formation regime
QQ=(R2*R5-FLX+R8*(QTOT-QCG-QVG)+R9)/(R4-R1*R5)
FLXSAT=-DQM*(R4-R1*R5)+R2*R5+R8*(QTOT-QVG-QCG)+R9
END IF
IF(QQ.LT.0.) THEN
SOILMOIS(1)=0.
ELSE IF(QQ.GT.DQM) THEN
!-- saturation
SOILMOIS(1)=DQM
RUNOFF2=runoff2+(FLXSAT-FLX)*DELT
RUNOFF=RUNOFF+(FLXSAT-FLX)
ELSE
SOILMOIS(1)=max(1.e-8,QQ)
END IF
!--- FINAL SOLUTION FOR SOILMOIS
! DO K=2,NZS
DO K=2,NZS-1
KK=NZS-K+1
QQ=COSMC(KK)*SOILMOIS(K-1)+RHSMC(KK)
IF (QQ.LT.0.) THEN
SOILMOIS(K)=0.
ELSE IF(QQ.GT.DQM) THEN
!-- saturation
SOILMOIS(K)=DQM
IF(K.EQ.NZS)THEN
RUNOFF2=RUNOFF2+(QQ-DQM)*(ZSMAIN(K)-ZSHALF(K))
ELSE
RUNOFF2=RUNOFF2+(QQ-DQM)*(ZSMAIN(K+1)-ZSHALF(K))
ENDIF
ELSE
SOILMOIS(K)=max(1.e-8,QQ)
END IF
END DO
! MAVAIL=min(1.,SOILMOIS(1)/(REF-QMIN))
MAVAIL=min(1.,SOILMOIS(1)/DQM)
if (MAVAIL.EQ.0.) MAVAIL=.00001
! RETURN
! END
!-------------------------------------------------------------------
END SUBROUTINE SOILMOIST
!-------------------------------------------------------------------
SUBROUTINE SOILPROP (docs) ( & 3
!--- input variables
nzs,fwsat,lwsat,tav,keepfr, &
soilmois,soiliqw,soilice, &
soilmoism,soiliqwm,soilicem, &
!--- soil fixed fields
QWRTZ,rhocs,dqm,qmin,psis,bclh,ksat, &
!--- constants
riw,xlmelt,CP,G0_P,cvw,ci, &
kqwrtz,kice,kwt, &
!--- output variables
thdif,diffu,hydro,cap)
!******************************************************************
! SOILPROP computes thermal diffusivity, and diffusional and
! hydraulic condeuctivities
!******************************************************************
! NX,NY,NZS - dimensions of soil domain
! FWSAT, LWSAT - volumetric content of frozen and liquid water
! for saturated condition at given temperatures (m^3/m^3)
! TAV - temperature averaged for soil layers (K)
! SOILMOIS - volumetric soil moisture at the main soil levels (m^3/m^3)
! SOILMOISM - volumetric soil moisture averaged for layers (m^3/m^3)
! SOILIQWM - volumetric liquid soil moisture averaged for layers (m^3/m^3)
! SOILICEM - volumetric content of soil ice averaged for layers (m^3/m^3)
! THDIF - thermal diffusivity for soil layers (W/m/K)
! DIFFU - diffusional conductivity (m^2/s)
! HYDRO - hydraulic conductivity (m/s)
! CAP - volumetric heat capacity (J/m^3/K)
!
!******************************************************************
IMPLICIT NONE
!-----------------------------------------------------------------
!--- soil properties
INTEGER, INTENT(IN ) :: NZS
REAL , &
INTENT(IN ) :: RHOCS, &
BCLH, &
DQM, &
KSAT, &
PSIS, &
QWRTZ, &
QMIN
REAL, DIMENSION( 1:nzs ) , &
INTENT(IN ) :: SOILMOIS, &
keepfr
REAL, INTENT(IN ) :: CP, &
CVW, &
RIW, &
kqwrtz, &
kice, &
kwt, &
XLMELT, &
G0_P
!--- output variables
REAL, DIMENSION(1:NZS) , &
INTENT(INOUT) :: cap,diffu,hydro , &
thdif,tav , &
soilmoism , &
soiliqw,soilice , &
soilicem,soiliqwm , &
fwsat,lwsat
!--- local variables
REAL, DIMENSION(1:NZS) :: hk,detal,kasat,kjpl
REAL :: x,x1,x2,x4,ws,wd,fact,fach,facd,psif,ci
REAL :: tln,tavln,tn,pf,a,am,ame,h
INTEGER :: nzs1,k
!-- for Johansen thermal conductivity
REAL :: kzero,gamd,kdry,kas,x5,sr,ke
nzs1=nzs-1
!-- Constants for Johansen (1975) thermal conductivity
kzero =2. ! if qwrtz > 0.2
do k=1,nzs
detal (k)=0.
kasat (k)=0.
kjpl (k)=0.
hk (k)=0.
enddo
ws=dqm+qmin
x1=xlmelt/(g0_p*psis)
x2=x1/bclh*ws
x4=(bclh+1.)/bclh
!--- Next 3 lines are for Johansen thermal conduct.
gamd=(1.-ws)*2700.
kdry=(0.135*gamd+64.7)/(2700.-0.947*gamd)
kas=kqwrtz**qwrtz*kzero**(1.-qwrtz)
DO K=1,NZS1
tn=tav(k) - 273.15
wd=ws - riw*soilicem(k)
psif=psis*100.*(wd/(soiliqwm(k)+qmin))**bclh &
* (ws/wd)**3.
!--- PSIF should be in [CM] to compute PF
pf=log10(abs(psif))
fact=1.+riw*soilicem(k)
!--- HK is for McCumber thermal conductivity
IF(PF.LE.5.2) THEN
HK(K)=420.*EXP(-(PF+2.7))*fact
ELSE
HK(K)=.1744*fact
END IF
IF(soilicem(k).NE.0.AND.TN.LT.0.) then
!--- DETAL is taking care of energy spent on freezing or released from
! melting of soil water
DETAL(K)=273.15*X2/(TAV(K)*TAV(K))* &
(TAV(K)/(X1*TN))**X4
if(keepfr(k).eq.1.) then
detal(k)=0.
endif
ENDIF
!--- Next 10 lines calculate Johansen thermal conductivity KJPL
kasat(k)=kas**(1.-ws)*kice**fwsat(k) &
*kwt**lwsat(k)
X5=(soilmoism(k)+qmin)/ws
if(soilicem(k).eq.0.) then
sr=max(0.101,x5)
ke=log10(sr)+1.
!--- next 2 lines - for coarse soils
! sr=max(0.0501,x5)
! ke=0.7*log10(sr)+1.
else
ke=x5
endif
kjpl(k)=ke*(kasat(k)-kdry)+kdry
!--- CAP -volumetric heat capacity
CAP(K)=(1.-WS)*RHOCS &
+ (soiliqwm(K)+qmin)*CVW &
+ soilicem(K)*CI &
+ (dqm-soilmoism(k))*CP*1.2 &
- DETAL(K)*1.e3*xlmelt
a=RIW*soilicem(K)
if((ws-a).lt.0.12)then
diffu(K)=0.
else
H=max(0.,(soilmoism(K)-a)/(max(1.e-8,(dqm-a))))
facd=1.
if(a.ne.0.)facd=1.-a/max(1.e-8,soilmoism(K))
ame=max(1.e-8,dqm-riw*soilicem(K))
!--- DIFFU is diffusional conductivity of soil water
diffu(K)=-BCLH*KSAT*PSIS/ame* &
(dqm/ame)**3. &
*H**(BCLH+2.)*facd
endif
! diffu(K)=-BCLH*KSAT*PSIS/dqm &
! *H**(BCLH+2.)
!--- thdif - thermal diffusivity
! thdif(K)=HK(K)/CAP(K)
!--- Use thermal conductivity from Johansen (1975)
thdif(K)=KJPL(K)/CAP(K)
END DO
DO K=1,NZS
if((ws-riw*soilice(k)).lt.0.12)then
hydro(k)=0.
else
fach=1.
if(soilice(k).ne.0.) &
fach=1.-riw*soilice(k)/max(1.e-8,soilmois(k))
am=max(1.e-8,dqm-riw*soilice(k))
!--- HYDRO is hydraulic conductivity of soil water
hydro(K)=KSAT/am* &
(soiliqw(K)/am) &
**(2.*BCLH+2.) &
* fach
endif
ENDDO
! RETURN
! END
!-----------------------------------------------------------------------
END SUBROUTINE SOILPROP
!-----------------------------------------------------------------------
SUBROUTINE TRANSF (docs) ( & 2
!--- input variables
nzs,nroot,soiliqw,tabs, &
!--- soil fixed fields
dqm,qmin,ref,wilt,zshalf, &
!--- output variables
tranf,transum)
!-------------------------------------------------------------------
!--- TRANF(K) - THE TRANSPIRATION FUNCTION (Smirnova et al. 1996, EQ. 18,19)
!*******************************************************************
! NX,NY,NZS - dimensions of soil domain
! SOILIQW - volumetric liquid soil moisture at the main levels (m^3/m^3)
! TRANF - the transpiration function at levels (m)
! TRANSUM - transpiration function integrated over the rooting zone (m)
!
!*******************************************************************
IMPLICIT NONE
!-------------------------------------------------------------------
!--- input variables
INTEGER, INTENT(IN ) :: nroot,nzs
REAL , &
INTENT(IN ) :: TABS
!--- soil properties
REAL , &
INTENT(IN ) :: DQM, &
QMIN, &
REF, &
WILT
REAL, DIMENSION(1:NZS), INTENT(IN) :: soiliqw, &
ZSHALF
!-- output
REAL, DIMENSION(1:NZS), INTENT(OUT) :: TRANF
REAL, INTENT(OUT) :: TRANSUM
!-- local variables
REAL :: totliq, did
INTEGER :: k
!-- for non-linear root distribution
REAL :: gx,sm1,sm2,sm3,sm4,ap0,ap1,ap2,ap3,ap4
REAL :: FTEM
REAL, DIMENSION(1:NZS) :: PART
!--------------------------------------------------------------------
do k=1,nzs
part(k)=0.
enddo
transum=0.
totliq=soiliqw(1)+qmin
sm1=totliq
sm2=sm1*sm1
sm3=sm2*sm1
sm4=sm3*sm1
ap0=0.299
ap1=-8.152
ap2=61.653
ap3=-115.876
ap4=59.656
gx=ap0+ap1*sm1+ap2*sm2+ap3*sm3+ap4*sm4
if(totliq.ge.ref) gx=1.
if(totliq.le.0.) gx=0.
if(gx.gt.1.) gx=1.
if(gx.lt.0.) gx=0.
DID=zshalf(2)
part(1)=DID*gx
!--- air temperature function
! Avissar (1985) and AX 7/95
IF (TABS .LE. 302.15) THEN
FTEM = 1.0 / (1.0 + EXP(-0.41 * (TABS - 282.05)))
ELSE
FTEM = 1.0 / (1.0 + EXP(0.5 * (TABS - 314.0)))
ENDIF
!---
IF(TOTLIQ.GT.REF) THEN
TRANF(1)=DID
ELSE IF(TOTLIQ.LE.WILT) THEN
TRANF(1)=0.
ELSE
TRANF(1)=(TOTLIQ-WILT)/(REF-WILT)*DID
ENDIF
!-- uncomment next line for non-linear root distribution
!cc TRANF(1)=part(1)
TRANF(1)=TRANF(1)*FTEM
DO K=2,NROOT
totliq=soiliqw(k)+qmin
sm1=totliq
sm2=sm1*sm1
sm3=sm2*sm1
sm4=sm3*sm1
gx=ap0+ap1*sm1+ap2*sm2+ap3*sm3+ap4*sm4
if(totliq.ge.ref) gx=1.
if(totliq.le.0.) gx=0.
if(gx.gt.1.) gx=1.
if(gx.lt.0.) gx=0.
DID=zshalf(K+1)-zshalf(K)
part(k)=did*gx
IF(totliq.GE.REF) THEN
TRANF(K)=DID
ELSE IF(totliq.LE.WILT) THEN
TRANF(K)=0.
ELSE
TRANF(K)=(totliq-WILT) &
/(REF-WILT)*DID
ENDIF
!-- uncomment next line for non-linear root distribution
!cc TRANF(k)=part(k)
TRANF(k)=TRANF(k)*FTEM
END DO
!-- TRANSUM - total for the rooting zone
transum=0.
DO K=1,NROOT
transum=transum+tranf(k)
END DO
! RETURN
! END
!-----------------------------------------------------------------
END SUBROUTINE TRANSF
!-----------------------------------------------------------------
SUBROUTINE VILKA (docs) (TN,D1,D2,PP,QS,TS,TT,NSTEP,ii,j,iland,isoil) 3,1
!--------------------------------------------------------------
!--- VILKA finds the solution of energy budget at the surface
!--- using table T,QS computed from Clausius-Klapeiron
!--------------------------------------------------------------
REAL, DIMENSION(1:4001), INTENT(IN ) :: TT
REAL, INTENT(IN ) :: TN,D1,D2,PP
INTEGER, INTENT(IN ) :: NSTEP,ii,j,iland,isoil
REAL, INTENT(OUT ) :: QS, TS
REAL :: F1,T1,T2,RN
INTEGER :: I,I1
I=(TN-1.7315E2)/.05+1
T1=173.1+FLOAT(I)*.05
F1=T1+D1*TT(I)-D2
I1=I-F1/(.05+D1*(TT(I+1)-TT(I)))
I=I1
IF(I.GT.4000.OR.I.LT.1) GOTO 1
10 I1=I
T1=173.1+FLOAT(I)*.05
F1=T1+D1*TT(I)-D2
RN=F1/(.05+D1*(TT(I+1)-TT(I)))
I=I-INT(RN)
IF(I.GT.4000.OR.I.LT.1) GOTO 1
IF(I1.NE.I) GOTO 10
TS=T1-.05*RN
QS=(TT(I)+(TT(I)-TT(I+1))*RN)/PP
GOTO 20
1 PRINT *,' AVOST IN VILKA '
! WRITE(12,*)'AVOST',TN,D1,D2,PP,NSTEP
PRINT *,TN,D1,D2,PP,NSTEP,I,TT(i),ii,j,iland,isoil
CALL wrf_error_fatal (' AVOST IN VILKA ' )
20 CONTINUE
! RETURN
! END
!-----------------------------------------------------------------------
END SUBROUTINE VILKA
!-----------------------------------------------------------------------
SUBROUTINE SOILVEGIN (docs) ( IVGTYP,ISLTYP,MYJ, & 1
IFOREST,EMISS,PC,ZNT,QWRTZ, &
RHOCS,BCLH,DQM,KSAT,PSIS,QMIN,REF,WILT )
!************************************************************************
! Set-up soil and vegetation Parameters in the case when
! snow disappears during the forecast and snow parameters
! shold be replaced by surface parameters according to
! soil and vegetation types in this point.
!
! Output:
!
!
! Soil parameters:
! DQM: MAX soil moisture content - MIN (m^3/m^3)
! REF: Reference soil moisture (m^3/m^3)
! WILT: Wilting PT soil moisture contents (m^3/m^3)
! QMIN: Air dry soil moist content limits (m^3/m^3)
! PSIS: SAT soil potential coefs. (m)
! KSAT: SAT soil diffusivity/conductivity coefs. (m/s)
! BCLH: Soil diffusivity/conductivity exponent.
!
! ************************************************************************
IMPLICIT NONE
!---------------------------------------------------------------------------
integer, parameter :: nsoilclas=19
integer, parameter :: nvegclas=24
integer, parameter :: iwater=16
integer, parameter :: ilsnow=99
!--- soiltyp classification according to STATSGO(nclasses=16)
!
! 1 SAND SAND
! 2 LOAMY SAND LOAMY SAND
! 3 SANDY LOAM SANDY LOAM
! 4 SILT LOAM SILTY LOAM
! 5 SILT SILTY LOAM
! 6 LOAM LOAM
! 7 SANDY CLAY LOAM SANDY CLAY LOAM
! 8 SILTY CLAY LOAM SILTY CLAY LOAM
! 9 CLAY LOAM CLAY LOAM
! 10 SANDY CLAY SANDY CLAY
! 11 SILTY CLAY SILTY CLAY
! 12 CLAY LIGHT CLAY
! 13 ORGANIC MATERIALS LOAM
! 14 WATER
! 15 BEDROCK
! Bedrock is reclassified as class 14
! 16 OTHER (land-ice)
! 17 Playa
! 18 Lava
! 19 White Sand
!
!----------------------------------------------------------------------
REAL LQMA(nsoilclas),LRHC(nsoilclas), &
LPSI(nsoilclas),LQMI(nsoilclas), &
LBCL(nsoilclas),LKAS(nsoilclas), &
LWIL(nsoilclas),LREF(nsoilclas), &
DATQTZ(nsoilclas)
!-- LQMA Rawls et al.[1982]
! DATA LQMA /0.417, 0.437, 0.453, 0.501, 0.486, 0.463, 0.398,
! & 0.471, 0.464, 0.430, 0.479, 0.475, 0.439, 1.0, 0.20, 0.401/
!---
!-- Clapp, R. and G. Hornberger, 1978: Empirical equations for some soil
! hydraulic properties, Water Resour. Res., 14, 601-604.
!-- Clapp et al. [1978]
DATA LQMA /0.395, 0.410, 0.435, 0.485, 0.485, 0.451, 0.420, &
0.477, 0.476, 0.426, 0.492, 0.482, 0.451, 1.0, &
0.20, 0.435, 0.468, 0.200, 0.339/
!-- LREF Rawls et al.[1982]
! DATA LREF /0.091, 0.125, 0.207, 0.330, 0.360, 0.270, 0.255,
! & 0.366, 0.318, 0.339, 0.387, 0.396, 0.329, 1.0, 0.108, 0.283/
!-- Clapp et al. [1978]
DATA LREF /0.174, 0.179, 0.249, 0.369, 0.369, 0.314, 0.299, &
0.357, 0.391, 0.316, 0.409, 0.400, 0.314, 1., &
0.1, 0.249, 0.454, 0.17, 0.236/
!-- LWIL Rawls et al.[1982]
! DATA LWIL/0.033, 0.055, 0.095, 0.133, 0.133, 0.117, 0.148,
! & 0.208, 0.197, 0.239, 0.250, 0.272, 0.066, 0.0, 0.006, 0.029/
!-- Clapp et al. [1978]
DATA LWIL/0.068, 0.075, 0.114, 0.179, 0.179, 0.155, 0.175, &
0.218, 0.250, 0.219, 0.283, 0.286, 0.155, 0.0, &
0.006, 0.114, 0.030, 0.006, 0.01/
! DATA LQMI/0.010, 0.028, 0.047, 0.084, 0.084, 0.066, 0.067,
! & 0.120, 0.103, 0.100, 0.126, 0.138, 0.066, 0.0, 0.006, 0.028/
!-- Carsel and Parrish [1988]
DATA LQMI/0.045, 0.057, 0.065, 0.067, 0.034, 0.078, 0.10, &
0.089, 0.095, 0.10, 0.070, 0.068, 0.078, 0.0, &
0.004, 0.065, 0.020, 0.004, 0.008/
!-- LPSI Cosby et al[1984]
! DATA LPSI/0.060, 0.036, 0.141, 0.759, 0.759, 0.355, 0.135,
! & 0.617, 0.263, 0.098, 0.324, 0.468, 0.355, 0.0, 0.069, 0.036/
! & 0.617, 0.263, 0.098, 0.324, 0.468, 0.355, 0.0, 0.069, 0.036/
!-- Clapp et al. [1978]
DATA LPSI/0.121, 0.090, 0.218, 0.786, 0.786, 0.478, 0.299, &
0.356, 0.630, 0.153, 0.490, 0.405, 0.478, 0.0, &
0.121, 0.218, 0.468, 0.069, 0.069/
!-- LKAS Rawls et al.[1982]
! DATA LKAS/5.83E-5, 1.70E-5, 7.19E-6, 1.89E-6, 1.89E-6,
! & 3.67E-6, 1.19E-6, 4.17E-7, 6.39E-7, 3.33E-7, 2.50E-7,
! & 1.67E-7, 3.38E-6, 0.0, 1.41E-4, 1.41E-5/
!-- Clapp et al. [1978]
DATA LKAS/1.76E-4, 1.56E-4, 3.47E-5, 7.20E-6, 7.20E-6, &
6.95E-6, 6.30E-6, 1.70E-6, 2.45E-6, 2.17E-6, &
1.03E-6, 1.28E-6, 6.95E-6, 0.0, 1.41E-4, &
3.47E-5, 1.28E-6, 1.41E-4, 1.76E-4/
!-- LBCL Cosby et al [1984]
! DATA LBCL/2.79, 4.26, 4.74, 5.33, 5.33, 5.25, 6.66,
! & 8.72, 8.17, 10.73, 10.39, 11.55, 5.25, 0.0, 2.79, 4.26/
!-- Clapp et al. [1978]
DATA LBCL/4.05, 4.38, 4.90, 5.30, 5.30, 5.39, 7.12, &
7.75, 8.52, 10.40, 10.40, 11.40, 5.39, 0.0, &
4.05, 4.90, 11.55, 2.79, 2.79/
DATA LRHC /1.47,1.41,1.34,1.27,1.27,1.21,1.18,1.32,1.23, &
1.18,1.15,1.09,1.21,4.18,2.03,2.10,1.09,2.03,1.47/
DATA DATQTZ/0.92,0.82,0.60,0.25,0.10,0.40,0.60,0.10,0.35, &
0.52,0.10,0.25,0.00,0.,0.60,0.0,0.25,0.60,0.92/
!--------------------------------------------------------------------------
!
! USGS Vegetation Types
!
! 1: Urban and Built-Up Land
! 2: Dryland Cropland and Pasture
! 3: Irrigated Cropland and Pasture
! 4: Mixed Dryland/Irrigated Cropland and Pasture
! 5: Cropland/Grassland Mosaic
! 6: Cropland/Woodland Mosaic
! 7: Grassland
! 8: Shrubland
! 9: Mixed Shrubland/Grassland
! 10: Savanna
! 11: Deciduous Broadleaf Forest
! 12: Deciduous Needleleaf Forest
! 13: Evergreen Broadleaf Forest
! 14: Evergreen Needleleaf Fores
! 15: Mixed Forest
! 16: Water Bodies
! 17: Herbaceous Wetland
! 18: Wooded Wetland
! 19: Barren or Sparsely Vegetated
! 20: Herbaceous Tundra
! 21: Wooded Tundra
! 22: Mixed Tundra
! 23: Bare Ground Tundra
! 24: Snow or Ice
!
! 25: Playa
! 26: Lava
! 27: White Sand
!---- Below are the arrays for the vegetation parameters
REAL LALB(nvegclas),LMOI(nvegclas),LEMI(nvegclas), &
LROU(nvegclas),LTHI(nvegclas),LSIG(nvegclas), &
LPC(nvegclas), NROTBL(nvegclas)
!************************************************************************
!---- vegetation parameters
!
!-- USGS model
!
DATA LALB/.18,.17,.18,.18,.18,.16,.19,.22,.20,.20,.16,.14, &
.12,.12,.13,.08,.14,.14,.25,.15,.15,.15,.25,.55/
DATA LEMI/.88,4*.92,.93,.92,.88,.9,.92,.93,.94, &
.95,.95,.94,.98,.95,.95,.85,.92,.93,.92,.85,.95/
!-- Roughness length is changed for forests and some others
! DATA LROU/.5,.06,.075,.065,.05,.2,.075,.1,.11,.15,.8,.85, &
! 2.0,1.0,.563,.0001,.2,.4,.05,.1,.15,.1,.065,.05/
DATA LROU/.5,.06,.075,.065,.05,.2,.075,.1,.11,.15,.5,.5, &
.5,.5,.5,.0001,.2,.4,.05,.1,.15,.1,.065,.05/
DATA LMOI/.1,.3,.5,.25,.25,.35,.15,.1,.15,.15,.3,.3, &
.5,.3,.3,1.,.6,.35,.02,.5,.5,.5,.02,.95/
!
!---- still needs to be corrected
!
! DATA LPC/ 15*.8,0.,.8,.8,.5,.5,.5,.5,.5,.0/
DATA LPC /0.4,0.3,0.4,0.4,0.4,0.4,0.4,0.4,0.4,0.4,5*0.55,0.,0.55,0.55, &
0.3,0.3,0.4,0.4,0.3,0./
! DATA LPC /0.6,6*0.8,0.7,0.75,6*0.8,0.,0.8,0.8, &
! 0.5,0.7,0.6,0.7,0.5,0./
!***************************************************************************
INTEGER :: &
IVGTYP, &
ISLTYP
LOGICAL, INTENT(IN ) :: myj
REAL , &
INTENT ( OUT) :: pc
REAL , &
INTENT (INOUT ) :: emiss, &
znt
!--- soil properties
REAL , &
INTENT( OUT) :: RHOCS, &
BCLH, &
DQM, &
KSAT, &
PSIS, &
QMIN, &
QWRTZ, &
REF, &
WILT
INTEGER, DIMENSION( 1:(nvegclas+3) ) , &
INTENT ( OUT) :: iforest
INTEGER, DIMENSION( 1:(nvegclas+3) ) :: if1
INTEGER :: kstart, kfin, lstart, lfin
INTEGER :: i,j,k
!***********************************************************************
! DATA ZS1/0.0,0.05,0.20,0.40,1.6,3.0/ ! o - levels in soil
! DATA ZS2/0.0,0.025,0.125,0.30,1.,2.3/ ! x - levels in soil
DATA IF1/12*0,1,1,1,12*0/
do k=1,nvegclas+3
iforest(k)=if1(k)
enddo
! EMISS = LEMI(IVGTYP)
EMISS = LEMITBL(IVGTYP)
! When MYJ sfc scheme is used - better use recommended in MYJSFCINIT
! values of roughness length, and not redefine it here.
! The table in this routine is the one we use in RUC with RUC LSM.
!tgs 3 Oct 2007 - MYJSFCINIT roughness produced unrealistic fluxes,
!tgs - will not use it any more!
!tgs if (.not. myj) then
! ZNT = LROU(IVGTYP)
ZNT = Z0TBL(IVGTYP)
!tgs endif
! PC = LPC (IVGTYP)
PC = PCTBL(IVGTYP)
! RHOCS = LRHC(ISLTYP)*1.E6
RHOCS = HC(ISLTYP)*1.E6
!tgs - parameters from SOILPARM.TBL
BCLH = BB(ISLTYP)
DQM = MAXSMC(ISLTYP)- &
DRYSMC(ISLTYP)
KSAT = SATDK(ISLTYP)
PSIS = - SATPSI(ISLTYP)
QMIN = DRYSMC(ISLTYP)
REF = REFSMC(ISLTYP)
WILT = WLTSMC(ISLTYP)
QWRTZ = QTZ(ISLTYP)
! BCLH = LBCL(ISLTYP)
! DQM = LQMA(ISLTYP)- &
! LQMI(ISLTYP)
! KSAT = LKAS(ISLTYP)
! PSIS = - LPSI(ISLTYP)
! QMIN = LQMI(ISLTYP)
! REF = LREF(ISLTYP)
! WILT = LWIL(ISLTYP)
! QWRTZ = DATQTZ(ISLTYP)
!--------------------------------------------------------------------------
END SUBROUTINE SOILVEGIN
!--------------------------------------------------------------------------
SUBROUTINE SNOWFREE (docs) (ivgtyp,myj,emiss,znt,iland) 1
!************************************************************************
! Set-up soil and vegetation Parameters in the case when
! snow disappears during the forecast and snow parameters
! shold be replaced by surface parameters according to
! soil and vegetation types in this point.
!
!***************************************************************************
IMPLICIT NONE
!---------------------------------------------------------------------------
integer, parameter :: nvegclas=24
INTEGER :: IVGTYP
LOGICAL, INTENT(IN ) :: myj
REAL, INTENT(INOUT) :: &
emiss, &
znt
INTEGER, INTENT(INOUT) :: ILAND
!---- Below are the arrays for the vegetation parameters
REAL, DIMENSION( 1:nvegclas ) :: LALB, &
LEMI, &
LROU_MYJ,&
LROU
!************************************************************************
!-- USGS model
!
DATA LALB/.18,.17,.18,.18,.18,.16,.19,.22,.20,.20,.16,.14, &
.12,.12,.13,.08,.14,.14,.25,.15,.15,.15,.25,.55/
DATA LEMI/.88,4*.92,.93,.92,.88,.9,.92,.93,.94, &
.95,.95,.94,.98,.95,.95,.85,.92,.93,.92,.85,.95/
!-- Roughness length is changed for forests and some others
! next 2 lines - table from RUC
! DATA LROU/.5,.06,.075,.065,.05,.2,.075,.1,.11,.15,.8,.85, &
! 2.0,1.0,.563,.0001,.2,.4,.05,.1,.15,.1,.065,.05/
DATA LROU/.5,.06,.075,.065,.05,.2,.075,.1,.11,.15,.5,.5, &
.5,.5,.5,.0001,.2,.4,.05,.1,.15,.1,.065,.05/
! With MYJSFC better use the table from MYJSFCINIT
DATA LROU_MYJ/1.0,.07,.07,.07,.07,.15,.08,.03,.05,.86,.8,.85, &
2.65,1.09,.8,.001,.04,.05,.01,.04,.06,.05,.03,.001/
!--------------------------------------------------------------------------
EMISS = LEMITBL(IVGTYP)
!tgs 3 Oct 2007 - LROU_MYJ gives unrealistic surface fluxes with RUC LSM with RUC LSM
! if(myj) then
! ZNT = LROU_MYJ(IVGTYP)
! else
ZNT = Z0TBL(IVGTYP)
!!! ZNT = LROU(IVGTYP)
! endif
ILAND = IVGTYP
! ---
! RETURN
! END
!--------------------------------------------------------------------------
END SUBROUTINE SNOWFREE
SUBROUTINE LSMRUCINIT (docs) ( SMFR3D,TSLB,SMOIS,ISLTYP,mavail, & 1,5
nzs, restart, &
allowed_to_read , &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
#ifdef WRF_CHEM
USE module_data_gocart_dust
#endif
IMPLICIT NONE
INTEGER, INTENT(IN ) :: ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte, &
nzs
REAL, DIMENSION( ims:ime, 1:nzs, jms:jme ) , &
INTENT(IN) :: TSLB, &
SMOIS
INTEGER, DIMENSION( ims:ime, jms:jme ) , &
INTENT(INOUT) :: ISLTYP
REAL, DIMENSION( ims:ime, 1:nzs, jms:jme ) , &
INTENT(INOUT) :: SMFR3D
REAL, DIMENSION( ims:ime, jms:jme ) , &
INTENT(INOUT) :: MAVAIL
REAL, DIMENSION ( 1:nzs ) :: SOILIQW
LOGICAL , INTENT(IN) :: restart, allowed_to_read
!
INTEGER :: I,J,L,itf,jtf
REAL :: RIW,XLMELT,TLN,DQM,REF,PSIS,QMIN,BCLH
INTEGER :: errflag
! itf=min0(ite,ide-1)
! jtf=min0(jte,jde-1)
RIW=900.*1.e-3
XLMELT=3.335E+5
! initialize three LSM related tables
IF ( allowed_to_read ) THEN
CALL wrf_message( 'INITIALIZE THREE LSM RELATED TABLES' )
CALL RUCLSM_PARM_INIT
ENDIF
IF(.not.restart)THEN
itf=min0(ite,ide-1)
jtf=min0(jte,jde-1)
errflag = 0
DO j = jts,jtf
DO i = its,itf
IF ( ISLTYP( i,j ) .LT. 1 ) THEN
errflag = 1
WRITE(err_message,*)"module_sf_ruclsm.F: lsminit: out of range ISLTYP ",i,j,ISLTYP( i,j )
CALL wrf_message(err_message)
ENDIF
ENDDO
ENDDO
IF ( errflag .EQ. 1 ) THEN
CALL wrf_error_fatal( "module_sf_ruclsm.F: lsminit: out of range value "// &
"of ISLTYP. Is this field in the input?" )
ENDIF
#ifdef WRF_CHEM
!
! need this parameter for dust parameterization in wrf/chem
!
do I=1,NSLTYPE
porosity(i)=maxsmc(i)
enddo
#endif
DO J=jts,jtf
DO I=its,itf
! CALL SOILIN ( ISLTYP(I,J), DQM, REF, PSIS, QMIN, BCLH )
!--- Computation of volumetric content of ice in soil
!--- and initialize MAVAIL
DQM = MAXSMC (ISLTYP(I,J)) - &
DRYSMC (ISLTYP(I,J))
REF = REFSMC (ISLTYP(I,J))
PSIS = - SATPSI (ISLTYP(I,J))
QMIN = DRYSMC (ISLTYP(I,J))
BCLH = BB (ISLTYP(I,J))
!!! IF (.not.restart) THEN
if(isltyp(i,j).ne.14) then
mavail(i,j) = max(0.00001,min(1.,smois(i,1,j)/dqm))
! mavail(i,j) = max(0.00001,min(1.,smois(i,1,j)/(ref-qmin)))
else
mavail(i,j) = 1.
endif
DO L=1,NZS
if(isltyp(i,j).ne.14) then
!-- for land points initialize soil ice
tln=log(TSLB(i,l,j)/273.15)
if(tln.lt.0.) then
soiliqw(l)=(dqm+qmin)*(XLMELT* &
(tslb(i,l,j)-273.15)/tslb(i,l,j)/9.81/psis) &
**(-1./bclh)-qmin
soiliqw(l)=max(0.,soiliqw(l))
soiliqw(l)=min(soiliqw(l),smois(i,l,j))
smfr3d(i,l,j)=(smois(i,l,j)-soiliqw(l))/RIW
else
smfr3d(i,l,j)=0.
endif
else
!-- for water points
smfr3d(i,l,j)=0.
endif
ENDDO
! ENDIF
ENDDO
ENDDO
ENDIF
END SUBROUTINE lsmrucinit
!
!-----------------------------------------------------------------
SUBROUTINE RUCLSM_PARM_INIT (docs) 1,1
!-----------------------------------------------------------------
character*8 :: MMINLU, MMINSL
MMINLU='USGS-RUC'
MMINSL='STAS-RUC'
call RUCLSM_SOILVEGPARM( MMINLU, MMINSL)
!-----------------------------------------------------------------
END SUBROUTINE RUCLSM_PARM_INIT
!-----------------------------------------------------------------
!-----------------------------------------------------------------
SUBROUTINE RUCLSM_SOILVEGPARM (docs) ( MMINLU, MMINSL) 1,64
!-----------------------------------------------------------------
IMPLICIT NONE
integer :: LUMATCH, IINDEX, LC, NUM_SLOPE
integer :: ierr
INTEGER , PARAMETER :: OPEN_OK = 0
character*8 :: MMINLU, MMINSL
character*128 :: mess , message, vege_parm_string
logical, external :: wrf_dm_on_monitor
!-----SPECIFY VEGETATION RELATED CHARACTERISTICS :
! ALBBCK: SFC albedo (in percentage)
! Z0: Roughness length (m)
! LEMI: Emissivity
! PC: Plant coefficient for transpiration function
! -- the rest of the parameters are read in but not used currently
! SHDFAC: Green vegetation fraction (in percentage)
! Note: The ALBEDO, Z0, and SHDFAC values read from the following table
! ALBEDO, amd Z0 are specified in LAND-USE TABLE; and SHDFAC is
! the monthly green vegetation data
! CMXTBL: MAX CNPY Capacity (m)
! NROTBL: Rooting depth (layer)
! RSMIN: Mimimum stomatal resistance (s m-1)
! RSMAX: Max. stomatal resistance (s m-1)
! RGL: Parameters used in radiation stress function
! HS: Parameter used in vapor pressure deficit functio
! TOPT: Optimum transpiration air temperature. (K)
! CMCMAX: Maximum canopy water capacity
! CFACTR: Parameter used in the canopy inteception calculati
! SNUP: Threshold snow depth (in water equivalent m) that
! implies 100% snow cover
! LAI: Leaf area index (dimensionless)
! MAXALB: Upper bound on maximum albedo over deep snow
!
!-----READ IN VEGETAION PROPERTIES FROM VEGPARM.TBL
!
IF ( wrf_dm_on_monitor() ) THEN
OPEN(19, FILE='VEGPARM.TBL',FORM='FORMATTED',STATUS='OLD',IOSTAT=ierr)
IF(ierr .NE. OPEN_OK ) THEN
WRITE(message,FMT='(A)') &
'module_sf_ruclsm.F: soil_veg_gen_parm: failure opening VEGPARM.TBL'
CALL wrf_error_fatal ( message )
END IF
WRITE ( mess, * ) 'INPUT VEGPARM FOR ',MMINLU
CALL wrf_message( mess )
LUMATCH=0
2000 FORMAT (A8)
READ (19,'(A)') vege_parm_string
outer : DO
READ (19,2000,END=2002)LUTYPE
READ (19,*)LUCATS,IINDEX
WRITE( mess , * ) 'VEGPARM FOR ',LUTYPE,' FOUND', LUCATS,' CATEGORIES'
CALL wrf_message( mess )
IF(LUTYPE.NE.MMINLU)THEN ! Skip over the undesired table
write ( mess , * ) 'Skipping ', LUTYPE, ' table'
CALL wrf_message( mess )
DO LC=1,LUCATS
READ (19,*)
ENDDO
inner : DO ! Find the next "Vegetation Parameters"
READ (19,'(A)',END=2002) vege_parm_string
IF (TRIM(vege_parm_string) .EQ. "Vegetation Parameters") THEN
EXIT inner
END IF
ENDDO inner
ELSE
LUMATCH=1
write ( mess , * ) 'Found ', LUTYPE, ' table'
CALL wrf_message( mess )
EXIT outer ! Found the table, read the data
END IF
ENDDO outer
IF (LUMATCH == 1) then
write ( mess , * ) 'Reading ',LUTYPE,' table'
CALL wrf_message( mess )
DO LC=1,LUCATS
READ (19,*)IINDEX,ALBTBL(LC),Z0TBL(LC),LEMITBL(LC),PCTBL(LC), &
SHDTBL(LC),NROTBL(LC),RSTBL(LC),RGLTBL(LC), &
HSTBL(LC),SNUPTBL(LC),LAITBL(LC),MAXALB(LC)
ENDDO
!
READ (19,*)
READ (19,*)TOPT_DATA
READ (19,*)
READ (19,*)CMCMAX_DATA
READ (19,*)
READ (19,*)CFACTR_DATA
READ (19,*)
READ (19,*)RSMAX_DATA
READ (19,*)
READ (19,*)BARE
READ (19,*)
READ (19,*)NATURAL
ENDIF
2002 CONTINUE
CLOSE (19)
IF (LUMATCH == 0) then
CALL wrf_error_fatal ("Land Use Dataset '"//MMINLU//"' not found in VEGPARM.TBL.")
ENDIF
END IF
CALL wrf_dm_bcast_string ( LUTYPE , 8 )
CALL wrf_dm_bcast_integer ( LUCATS , 1 )
CALL wrf_dm_bcast_integer ( IINDEX , 1 )
CALL wrf_dm_bcast_integer ( LUMATCH , 1 )
CALL wrf_dm_bcast_real ( ALBTBL , NLUS )
CALL wrf_dm_bcast_real ( Z0TBL , NLUS )
CALL wrf_dm_bcast_real ( LEMITBL , NLUS )
CALL wrf_dm_bcast_real ( PCTBL , NLUS )
CALL wrf_dm_bcast_real ( SHDTBL , NLUS )
CALL wrf_dm_bcast_real ( NROTBL , NLUS )
CALL wrf_dm_bcast_real ( RSTBL , NLUS )
CALL wrf_dm_bcast_real ( RGLTBL , NLUS )
CALL wrf_dm_bcast_real ( HSTBL , NLUS )
CALL wrf_dm_bcast_real ( SNUPTBL , NLUS )
CALL wrf_dm_bcast_real ( LAITBL , NLUS )
CALL wrf_dm_bcast_real ( MAXALB , NLUS )
CALL wrf_dm_bcast_real ( TOPT_DATA , 1 )
CALL wrf_dm_bcast_real ( CMCMAX_DATA , 1 )
CALL wrf_dm_bcast_real ( CFACTR_DATA , 1 )
CALL wrf_dm_bcast_real ( RSMAX_DATA , 1 )
CALL wrf_dm_bcast_integer ( BARE , 1 )
!
!-----READ IN SOIL PROPERTIES FROM SOILPARM.TBL
!
IF ( wrf_dm_on_monitor() ) THEN
OPEN(19, FILE='SOILPARM.TBL',FORM='FORMATTED',STATUS='OLD',IOSTAT=ierr)
IF(ierr .NE. OPEN_OK ) THEN
WRITE(message,FMT='(A)') &
'module_sf_ruclsm.F: soil_veg_gen_parm: failure opening SOILPARM.TBL'
CALL wrf_error_fatal ( message )
END IF
WRITE(mess,*) 'INPUT SOIL TEXTURE CLASSIFICAION = ',MMINSL
CALL wrf_message( mess )
LUMATCH=0
READ (19,*)
READ (19,2000,END=2003)SLTYPE
READ (19,*)SLCATS,IINDEX
IF(SLTYPE.NE.MMINSL)THEN
DO LC=1,SLCATS
READ (19,*) IINDEX,BB(LC),DRYSMC(LC),HC(LC),MAXSMC(LC),&
REFSMC(LC),SATPSI(LC),SATDK(LC), SATDW(LC), &
WLTSMC(LC), QTZ(LC)
ENDDO
ENDIF
READ (19,*)
READ (19,2000,END=2003)SLTYPE
READ (19,*)SLCATS,IINDEX
IF(SLTYPE.EQ.MMINSL)THEN
WRITE( mess , * ) 'SOIL TEXTURE CLASSIFICATION = ',SLTYPE,' FOUND', &
SLCATS,' CATEGORIES'
CALL wrf_message ( mess )
LUMATCH=1
ENDIF
IF(SLTYPE.EQ.MMINSL)THEN
DO LC=1,SLCATS
READ (19,*) IINDEX,BB(LC),DRYSMC(LC),HC(LC),MAXSMC(LC),&
REFSMC(LC),SATPSI(LC),SATDK(LC), SATDW(LC), &
WLTSMC(LC), QTZ(LC)
ENDDO
ENDIF
2003 CONTINUE
CLOSE (19)
ENDIF
CALL wrf_dm_bcast_integer ( LUMATCH , 1 )
CALL wrf_dm_bcast_string ( SLTYPE , 8 )
CALL wrf_dm_bcast_string ( MMINSL , 8 ) ! since this is reset above, see oct2 ^
CALL wrf_dm_bcast_integer ( SLCATS , 1 )
CALL wrf_dm_bcast_integer ( IINDEX , 1 )
CALL wrf_dm_bcast_real ( BB , NSLTYPE )
CALL wrf_dm_bcast_real ( DRYSMC , NSLTYPE )
CALL wrf_dm_bcast_real ( HC , NSLTYPE )
CALL wrf_dm_bcast_real ( MAXSMC , NSLTYPE )
CALL wrf_dm_bcast_real ( REFSMC , NSLTYPE )
CALL wrf_dm_bcast_real ( SATPSI , NSLTYPE )
CALL wrf_dm_bcast_real ( SATDK , NSLTYPE )
CALL wrf_dm_bcast_real ( SATDW , NSLTYPE )
CALL wrf_dm_bcast_real ( WLTSMC , NSLTYPE )
CALL wrf_dm_bcast_real ( QTZ , NSLTYPE )
IF(LUMATCH.EQ.0)THEN
CALL wrf_message( 'SOIl TEXTURE IN INPUT FILE DOES NOT ' )
CALL wrf_message( 'MATCH SOILPARM TABLE' )
CALL wrf_error_fatal ( 'INCONSISTENT OR MISSING SOILPARM FILE' )
ENDIF
!
!-----READ IN GENERAL PARAMETERS FROM GENPARM.TBL
!
IF ( wrf_dm_on_monitor() ) THEN
OPEN(19, FILE='GENPARM.TBL',FORM='FORMATTED',STATUS='OLD',IOSTAT=ierr)
IF(ierr .NE. OPEN_OK ) THEN
WRITE(message,FMT='(A)') &
'module_sf_ruclsm.F: soil_veg_gen_parm: failure opening GENPARM.TBL'
CALL wrf_error_fatal ( message )
END IF
READ (19,*)
READ (19,*)
READ (19,*) NUM_SLOPE
SLPCATS=NUM_SLOPE
DO LC=1,SLPCATS
READ (19,*)SLOPE_DATA(LC)
ENDDO
READ (19,*)
READ (19,*)SBETA_DATA
READ (19,*)
READ (19,*)FXEXP_DATA
READ (19,*)
READ (19,*)CSOIL_DATA
READ (19,*)
READ (19,*)SALP_DATA
READ (19,*)
READ (19,*)REFDK_DATA
READ (19,*)
READ (19,*)REFKDT_DATA
READ (19,*)
READ (19,*)FRZK_DATA
READ (19,*)
READ (19,*)ZBOT_DATA
READ (19,*)
READ (19,*)CZIL_DATA
READ (19,*)
READ (19,*)SMLOW_DATA
READ (19,*)
READ (19,*)SMHIGH_DATA
CLOSE (19)
ENDIF
CALL wrf_dm_bcast_integer ( NUM_SLOPE , 1 )
CALL wrf_dm_bcast_integer ( SLPCATS , 1 )
CALL wrf_dm_bcast_real ( SLOPE_DATA , NSLOPE )
CALL wrf_dm_bcast_real ( SBETA_DATA , 1 )
CALL wrf_dm_bcast_real ( FXEXP_DATA , 1 )
CALL wrf_dm_bcast_real ( CSOIL_DATA , 1 )
CALL wrf_dm_bcast_real ( SALP_DATA , 1 )
CALL wrf_dm_bcast_real ( REFDK_DATA , 1 )
CALL wrf_dm_bcast_real ( REFKDT_DATA , 1 )
CALL wrf_dm_bcast_real ( FRZK_DATA , 1 )
CALL wrf_dm_bcast_real ( ZBOT_DATA , 1 )
CALL wrf_dm_bcast_real ( CZIL_DATA , 1 )
CALL wrf_dm_bcast_real ( SMLOW_DATA , 1 )
CALL wrf_dm_bcast_real ( SMHIGH_DATA , 1 )
!-----------------------------------------------------------------
END SUBROUTINE RUCLSM_SOILVEGPARM
!-----------------------------------------------------------------
SUBROUTINE SOILIN (docs) (ISLTYP, DQM, REF, PSIS, QMIN, BCLH )
!--- soiltyp classification according to STATSGO(nclasses=16)
!
! 1 SAND SAND
! 2 LOAMY SAND LOAMY SAND
! 3 SANDY LOAM SANDY LOAM
! 4 SILT LOAM SILTY LOAM
! 5 SILT SILTY LOAM
! 6 LOAM LOAM
! 7 SANDY CLAY LOAM SANDY CLAY LOAM
! 8 SILTY CLAY LOAM SILTY CLAY LOAM
! 9 CLAY LOAM CLAY LOAM
! 10 SANDY CLAY SANDY CLAY
! 11 SILTY CLAY SILTY CLAY
! 12 CLAY LIGHT CLAY
! 13 ORGANIC MATERIALS LOAM
! 14 WATER
! 15 BEDROCK
! Bedrock is reclassified as class 14
! 16 OTHER (land-ice)
! extra classes from Fei Chen
! 17 Playa
! 18 Lava
! 19 White Sand
!
!----------------------------------------------------------------------
integer, parameter :: nsoilclas=19
integer, intent ( in) :: isltyp
real, intent ( out) :: dqm,ref,qmin,psis
REAL LQMA(nsoilclas),LREF(nsoilclas),LBCL(nsoilclas), &
LPSI(nsoilclas),LQMI(nsoilclas)
!-- LQMA Rawls et al.[1982]
! DATA LQMA /0.417, 0.437, 0.453, 0.501, 0.486, 0.463, 0.398,
! & 0.471, 0.464, 0.430, 0.479, 0.475, 0.439, 1.0, 0.20, 0.401/
!---
!-- Clapp, R. and G. Hornberger, Empirical equations for some soil
! hydraulic properties, Water Resour. Res., 14,601-604,1978.
!-- Clapp et al. [1978]
DATA LQMA /0.395, 0.410, 0.435, 0.485, 0.485, 0.451, 0.420, &
0.477, 0.476, 0.426, 0.492, 0.482, 0.451, 1.0, &
0.20, 0.435, 0.468, 0.200, 0.339/
!-- Clapp et al. [1978]
DATA LREF /0.174, 0.179, 0.249, 0.369, 0.369, 0.314, 0.299, &
0.357, 0.391, 0.316, 0.409, 0.400, 0.314, 1., &
0.1, 0.249, 0.454, 0.17, 0.236/
!-- Carsel and Parrish [1988]
DATA LQMI/0.045, 0.057, 0.065, 0.067, 0.034, 0.078, 0.10, &
0.089, 0.095, 0.10, 0.070, 0.068, 0.078, 0.0, &
0.004, 0.065, 0.020, 0.004, 0.008/
!-- Clapp et al. [1978]
DATA LPSI/0.121, 0.090, 0.218, 0.786, 0.786, 0.478, 0.299, &
0.356, 0.630, 0.153, 0.490, 0.405, 0.478, 0.0, &
0.121, 0.218, 0.468, 0.069, 0.069/
!-- Clapp et al. [1978]
DATA LBCL/4.05, 4.38, 4.90, 5.30, 5.30, 5.39, 7.12, &
7.75, 8.52, 10.40, 10.40, 11.40, 5.39, 0.0, &
4.05, 4.90, 11.55, 2.79, 2.79/
DQM = LQMA(ISLTYP)- &
LQMI(ISLTYP)
REF = LREF(ISLTYP)
PSIS = - LPSI(ISLTYP)
QMIN = LQMI(ISLTYP)
BCLH = LBCL(ISLTYP)
END SUBROUTINE SOILIN
END MODULE module_sf_ruclsm