#if ( ! NMM_CORE == 1 )
MODULE module_soil_pre 
(docs) 5
USE module_date_time
USE module_state_description
CONTAINS
SUBROUTINE adjust_for_seaice_pre (docs) ( xice , landmask , tsk , ivgtyp , vegcat , lu_index , & 1,6
xland , landusef , isltyp , soilcat , soilctop , &
soilcbot , tmn , &
seaice_threshold , &
fractional_seaice, &
num_veg_cat , num_soil_top_cat , num_soil_bot_cat , &
iswater , isice , &
scheme , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater , isice
INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme
REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef
REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop
REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot
INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , &
vegcat, xland , soilcat , tmn
REAL , INTENT(IN) :: seaice_threshold
INTEGER :: i , j , num_seaice_changes , loop
CHARACTER (LEN=132) :: message
INTEGER, INTENT(IN) :: fractional_seaice
REAL :: XICE_THRESHOLD
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice_threshold = 0.5
ELSEIF ( FRACTIONAL_SEAICE == 1 ) THEN
xice_threshold = 0.02
ENDIF
num_seaice_changes = 0
fix_seaice : SELECT CASE ( scheme )
CASE ( SLABSCHEME )
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( xice(i,j) .GT. 200.0 ) THEN
xice(i,j) = 0.
num_seaice_changes = num_seaice_changes + 1
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total pre number of sea ice locations removed (due to FLAG values) = ', &
num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
num_seaice_changes = 0
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( ( xice(i,j) .GE. xice_threshold ) .OR. &
( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice(i,j) = 1.0
ENDIF
num_seaice_changes = num_seaice_changes + 1
if(landmask(i,j) .LT. 0.5 )tmn(i,j) = 271.4
vegcat(i,j)=isice
ivgtyp(i,j)=isice
lu_index(i,j)=isice
landmask(i,j)=1.
xland(i,j)=1.
DO loop=1,num_veg_cat
landusef(i,loop,j)=0.
END DO
landusef(i,ivgtyp(i,j),j)=1.
isltyp(i,j) = 16
soilcat(i,j)=isltyp(i,j)
DO loop=1,num_soil_top_cat
soilctop(i,loop,j)=0
END DO
DO loop=1,num_soil_bot_cat
soilcbot(i,loop,j)=0
END DO
soilctop(i,isltyp(i,j),j)=1.
soilcbot(i,isltyp(i,j),j)=1.
ELSE
xice(i,j) = 0.0
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total pre number of sea ice location changes (water to land) = ', num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
CASE ( LSMSCHEME , RUCLSMSCHEME )
num_seaice_changes = 0
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .GT. 0.5 ) THEN
if (xice(i,j).gt.0) num_seaice_changes = num_seaice_changes + 1
xice(i,j) = 0.
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total pre number of land location changes (seaice set to zero) = ', num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
END SELECT fix_seaice
END SUBROUTINE adjust_for_seaice_pre
SUBROUTINE adjust_for_seaice_post (docs) ( xice , landmask , tsk_old , tsk , ivgtyp , vegcat , lu_index , & 1,6
xland , landusef , isltyp , soilcat , soilctop , &
soilcbot , tmn , vegfra , &
tslb , smois , sh2o , &
seaice_threshold , &
fractional_seaice, &
num_veg_cat , num_soil_top_cat , num_soil_bot_cat , &
num_soil_layers , &
iswater , isice , &
scheme , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater , isice
INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme
INTEGER , INTENT(IN) :: num_soil_layers
REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef
REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop
REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot
REAL , DIMENSION(ims:ime,1:num_soil_layers,jms:jme) , INTENT(INOUT):: tslb , smois , sh2o
INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , &
vegcat, xland , soilcat , tmn , &
tsk_old , vegfra
REAL , INTENT(IN) :: seaice_threshold
REAL :: total_depth , mid_point_depth
INTEGER :: i , j , num_seaice_changes , loop
CHARACTER (LEN=132) :: message
INTEGER, INTENT(IN) :: fractional_seaice
real :: xice_threshold
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice_threshold = 0.5
ELSEIF ( FRACTIONAL_SEAICE == 1 ) THEN
xice_threshold = 0.02
ENDIF
num_seaice_changes = 0
fix_seaice : SELECT CASE ( scheme )
CASE ( SLABSCHEME )
CASE ( LSMSCHEME , RUCLSMSCHEME )
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( xice(i,j) .GT. 200.0 ) THEN
xice(i,j) = 0.
num_seaice_changes = num_seaice_changes + 1
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total post number of sea ice locations removed (due to FLAG values) = ', &
num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
num_seaice_changes = 0
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( ( ( tsk(i,j) .LT. 170 ) .OR. ( tsk(i,j) .GT. 400 ) ) .AND. &
( ( tsk_old(i,j) .GT. 170 ) .AND. ( tsk_old(i,j) .LT. 400 ) ) )THEN
tsk(i,j) = tsk_old(i,j)
END IF
IF ( ( ( tsk(i,j) .LT. 170 ) .OR. ( tsk(i,j) .GT. 400 ) ) .AND. &
( ( tsk_old(i,j) .LT. 170 ) .OR. ( tsk_old(i,j) .GT. 400 ) ) )THEN
print *,'TSK woes in seaice post, i,j=',i,j,' tsk = ',tsk(i,j), tsk_old(i,j)
CALL wrf_error_fatal ( 'TSK is unrealistic, problems for seaice post')
ELSE IF ( ( xice(i,j) .GE. xice_threshold ) .OR. &
( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice(i,j) = 1.0
ENDIF
num_seaice_changes = num_seaice_changes + 1
if(landmask(i,j) .LT. 0.5 )tmn(i,j) = 271.4
vegcat(i,j)=isice
ivgtyp(i,j)=isice
lu_index(i,j)=isice
landmask(i,j)=1.
xland(i,j)=1.
vegfra(i,j)=0.
DO loop=1,num_veg_cat
landusef(i,loop,j)=0.
END DO
landusef(i,ivgtyp(i,j),j)=1.
tsk_old(i,j) = tsk(i,j)
isltyp(i,j) = 16
soilcat(i,j)=isltyp(i,j)
DO loop=1,num_soil_top_cat
soilctop(i,loop,j)=0
END DO
DO loop=1,num_soil_bot_cat
soilcbot(i,loop,j)=0
END DO
soilctop(i,isltyp(i,j),j)=1.
soilcbot(i,isltyp(i,j),j)=1.
total_depth = 3. ! ice is 3 m deep, num_soil_layers equispaced layers
DO loop = 1,num_soil_layers
mid_point_depth=(total_depth/num_soil_layers)/2. + &
(loop-1)*(total_depth/num_soil_layers)
tslb(i,loop,j) = ( (total_depth-mid_point_depth)*tsk(i,j) + &
mid_point_depth*tmn(i,j) ) / total_depth
END DO
DO loop=1,num_soil_layers
smois(i,loop,j) = 1.0
sh2o(i,loop,j) = 0.0
END DO
ELSE IF ( xice(i,j) .LT. xice_threshold ) THEN
xice(i,j) = 0.
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total post number of sea ice location changes (water to land) = ', num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
END SELECT fix_seaice
END SUBROUTINE adjust_for_seaice_post
SUBROUTINE process_percent_cat_new (docs) ( landmask , & 3,15
landuse_frac , soil_top_cat , soil_bot_cat , &
isltyp , ivgtyp , &
num_veg_cat , num_soil_top_cat , num_soil_bot_cat , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater
INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat
REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landuse_frac
REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(IN):: soil_top_cat
REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(IN):: soil_bot_cat
INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask
INTEGER :: i , j , l , ll, dominant_index
REAL :: dominant_value
#ifdef WRF_CHEM
! REAL :: lwthresh = .99
REAL :: lwthresh = .50
#else
REAL :: lwthresh = .50
#endif
INTEGER , PARAMETER :: iswater_soil = 14
INTEGER :: iforce
CHARACTER (LEN=132) :: message
integer :: change_water , change_land
change_water = 0
change_land = 0
! Sanity check on the 50/50 points
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
dominant_value = landuse_frac(i,iswater,j)
IF ( dominant_value .EQ. lwthresh ) THEN
DO l = 1 , num_veg_cat
IF ( l .EQ. iswater ) CYCLE
IF ( ( landuse_frac(i,l,j) .EQ. lwthresh ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN
PRINT *,i,j,' water and category ',l,' both at 50%, landmask is ',landmask(i,j)
landuse_frac(i,l,j) = lwthresh - .01
landuse_frac(i,iswater,j) = lwthresh + 0.01
ELSE IF ( ( landuse_frac(i,l,j) .EQ. lwthresh ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN
PRINT *,i,j,' water and category ',l,' both at 50%, landmask is ',landmask(i,j)
landuse_frac(i,l,j) = lwthresh + .01
landuse_frac(i,iswater,j) = lwthresh - 0.01
END IF
END DO
END IF
END DO
END DO
! Compute the dominant VEGETATION INDEX.
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
dominant_value = landuse_frac(i,1,j)
dominant_index = 1
DO l = 2 , num_veg_cat
IF ( l .EQ. iswater ) THEN
! wait a bit
ELSE IF ( ( l .NE. iswater ) .AND. ( landuse_frac(i,l,j) .GT. dominant_value ) ) THEN
dominant_value = landuse_frac(i,l,j)
dominant_index = l
END IF
END DO
IF ( landuse_frac(i,iswater,j) .GT. lwthresh ) THEN
dominant_value = landuse_frac(i,iswater,j)
dominant_index = iswater
ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh) .AND. &
( landmask(i,j) .LT. 0.5) .AND. &
( dominant_value .EQ. lwthresh) ) THEN
dominant_value = landuse_frac(i,iswater,j)
dominant_index = iswater
ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh) .AND. &
( landmask(i,j) .GT. 0.5) .AND. &
( dominant_value .EQ. lwthresh) ) THEN
!no op
ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh ) .AND. &
( dominant_value .LT. lwthresh ) ) THEN
dominant_value = landuse_frac(i,iswater,j)
dominant_index = iswater
END IF
IF ( dominant_index .EQ. iswater ) THEN
if(landmask(i,j).gt.lwthresh) then
!print *,'changing to water at point ',i,j
!print '(24(i3,1x))',1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16, 17,18,19,20,21, 22, 23,24
!print '(24(i3,1x))',nint(landuse_frac(i,:,j)*100)
change_water=change_water+1
endif
landmask(i,j) = 0
ELSE IF ( dominant_index .NE. iswater ) THEN
if(landmask(i,j).lt.lwthresh) then
!print *,'changing to land at point ',i,j
!print '(24(i3,1x))',1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16, 17,18,19,20,21, 22, 23,24
!print '(24(i3,1x))',nint(landuse_frac(i,:,j)*100)
change_land=change_land+1
endif
landmask(i,j) = 1
END IF
ivgtyp(i,j) = dominant_index
END DO
END DO
! Compute the dominant SOIL TEXTURE INDEX, TOP.
iforce = 0
DO i = its , MIN(ide-1,ite)
DO j = jts , MIN(jde-1,jte)
dominant_value = soil_top_cat(i,1,j)
dominant_index = 1
IF ( landmask(i,j) .GT. lwthresh ) THEN
DO l = 2 , num_soil_top_cat
IF ( ( l .NE. iswater_soil ) .AND. ( soil_top_cat(i,l,j) .GT. dominant_value ) ) THEN
dominant_value = soil_top_cat(i,l,j)
dominant_index = l
END IF
END DO
IF ( dominant_value .LT. 0.01 ) THEN
iforce = iforce + 1
WRITE ( message , FMT = '(A,I4,I4)' ) &
'based on landuse, changing soil to land at point ',i,j
CALL wrf_debug(1,message)
WRITE ( message , FMT = '(16(i3,1x))' ) &
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16
CALL wrf_debug(1,message)
WRITE ( message , FMT = '(16(i3,1x))' ) &
nint(soil_top_cat(i,:,j)*100)
CALL wrf_debug(1,message)
dominant_index = 8
END IF
ELSE
dominant_index = iswater_soil
END IF
isltyp(i,j) = dominant_index
END DO
END DO
if(iforce.ne.0)then
WRITE(message,FMT='(A,I4,A,I6)' ) &
'forcing artificial silty clay loam at ',iforce,' points, out of ',&
(MIN(ide-1,ite)-its+1)*(MIN(jde-1,jte)-jts+1)
CALL wrf_debug(0,message)
endif
print *,'LAND CHANGE = ',change_land
print *,'WATER CHANGE = ',change_water
END SUBROUTINE process_percent_cat_new
SUBROUTINE process_soil_real (docs) ( tsk , tmn , tavgsfc, & 2,23
landmask , sst , ht, toposoil, &
st_input , sm_input , sw_input , &
st_levels_input , sm_levels_input , sw_levels_input , &
zs , dzs , tslb , smois , sh2o , &
flag_sst , flag_tavgsfc, flag_soilhgt, &
flag_soil_layers, flag_soil_levels, &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
sf_surface_physics , num_soil_layers , real_data_init_type , &
num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
sf_surface_physics , num_soil_layers , real_data_init_type , &
num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc
INTEGER , INTENT(IN) :: flag_sst, flag_tavgsfc
INTEGER , INTENT(IN) :: flag_soil_layers, flag_soil_levels, flag_soilhgt
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input
INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input
INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input
REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tavgsfc, ht, toposoil
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk, tmn
INTEGER :: i , j , k, l , dominant_index , num_soil_cat , num_veg_cat, closest_layer
REAL :: dominant_value, closest_depth, diff_cm
REAL , ALLOCATABLE , DIMENSION(:) :: depth ! Soil layer thicknesses (cm)
REAL, PARAMETER :: get_temp_closest_to = 30. ! use soil temperature closest to this depth (cm)
REAL, PARAMETER :: something_big = 1.e6 ! Initialize closest depth as something big (cm)
INTEGER :: something_far = 1000 ! Soil array index far away
CHARACTER (LEN=132) :: message
! Case statement for tmn initialization
! Need to have a reasonable default value for annual mean deeeeep soil temperature
! For sf_surface_physics = 1, we want to use close to a 30 cm value
! for the bottom level of the soil temps.
! NOTE: We are assuming that soil_layers are the same for each grid point
fix_bottom_level_for_temp : SELECT CASE ( sf_surface_physics )
CASE (SLABSCHEME)
IF ( flag_tavgsfc .EQ. 1 ) THEN
CALL wrf_debug ( 0 , 'Using average surface temperature for tmn')
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tmn(i,j) = tavgsfc(i,j)
END DO
END DO
ELSE
! Look for soil temp close to 30 cm
closest_layer = something_far
closest_depth = something_big
DO k = 1, num_st_levels_input
diff_cm = abs( st_levels_input(k) - get_temp_closest_to )
IF ( diff_cm < closest_depth ) THEN
closest_depth = diff_cm
closest_layer = k
END IF
END DO
IF ( closest_layer == something_far ) THEN
CALL wrf_debug ( 0 , 'No soil temperature data for grid%tmn near 30 cm')
CALL wrf_debug ( 0 , 'Using 1 degree static annual mean temps' )
ELSE
write(message, FMT='(A,F7.2,A,I3)')&
'Soil temperature closest to ',get_temp_closest_to, &
' at level ',st_levels_input(closest_layer)
CALL wrf_debug ( 0 , message )
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tmn(i,j) = st_input(i,closest_layer+1,j)
END DO
END DO
END IF
END IF
CASE (LSMSCHEME)
CASE (RUCLSMSCHEME)
CASE (PXLSMSCHEME)
! When the input data from met_em is in layers, there is an additional level added to the beginning
! of the array to define the surface, which is why we add the extra value (closest_layer+1)
IF ( flag_tavgsfc .EQ. 1 ) THEN
CALL wrf_debug ( 0 , 'Using average surface temperature for tmn')
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tmn(i,j) = tavgsfc(i,j)
END DO
END DO
ELSE
! Look for soil temp close to 30 cm
closest_layer = num_st_levels_input+1
closest_depth = something_big
DO k = 1, num_st_levels_input
diff_cm = abs( st_levels_input(k) - get_temp_closest_to )
IF ( diff_cm < closest_depth ) THEN
closest_depth = diff_cm
closest_layer = k
END IF
END DO
IF ( closest_layer == num_st_levels_input + 1 ) THEN
CALL wrf_debug ( 0 , 'No soil temperature data for grid%tmn near 30 cm')
CALL wrf_debug ( 0 , 'Using 1 degree static annual mean temps' )
ELSE
write(message, FMT='(A,F7.2,A,I3)')&
'Soil temperature closest to ',get_temp_closest_to, &
' at level ',st_levels_input(closest_layer)
CALL wrf_debug ( 0 , message )
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tmn(i,j) = st_input(i,closest_layer+1,j)
END DO
END DO
END IF
END IF
#if 0
! Loop over layers and do a weighted mean
IF ( ALLOCATED ( depth ) ) DEALLOCATE ( depth )
ALLOCATE ( depth(num_st_levels_input) )
IF ( flag_soil_layers == 1 ) THEN
DO k = num_st_levels_input, 2, -1
depth(k) = st_levels_input(k) - st_levels_input(k-1)
END DO
depth(1) = st_levels_input(1)
ELSE IF ( flag_soil_levels == 1 ) THEN
DO k = 2, num_st_levels_input
depth(k) = st_levels_input(k) - st_levels_input(k-1)
END DO
depth(1) = 0.
END IF
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tmn(i,j) = 0.
DO k = 1, num_st_levels_input
tmn(i,j) = tmn(i,j) + depth(k) * st_input(i,k,j)
END DO
END DO
END DO
DEALLOCATE ( depth )
#endif
END SELECT fix_bottom_level_for_temp
! Adjust the various soil temperature values depending on the difference in
! elevation between the current model's elevation and the incoming data's
! orography.
adjust_soil : SELECT CASE ( sf_surface_physics )
CASE ( SLABSCHEME , LSMSCHEME , RUCLSMSCHEME, PXLSMSCHEME )
CALL adjust_soil_temp_new ( tmn , sf_surface_physics , tsk , ht , &
toposoil , landmask , st_input, st_levels_input, &
flag_soilhgt , flag_tavgsfc , &
flag_soil_layers , flag_soil_levels, &
num_st_levels_input, num_st_levels_alloc, &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
END SELECT adjust_soil
! Initialize the soil depth, and the soil temperature and moisture.
IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_1 ( zs , dzs , num_soil_layers )
CALL init_soil_1_real ( tsk , tmn , tslb , zs , dzs , num_soil_layers , real_data_init_type , &
landmask , sst , flag_sst , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
ELSE IF ( ( sf_surface_physics .EQ. 2 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_2 ( zs , dzs , num_soil_layers )
CALL init_soil_2_real ( tsk , tmn , smois , sh2o , tslb , &
st_input , sm_input , sw_input , landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , sw_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
flag_sst , flag_soil_layers , flag_soil_levels , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_3 ( zs , dzs , num_soil_layers )
CALL init_soil_3_real ( tsk , tmn , smois , tslb , &
st_input , sm_input , landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , &
flag_sst , flag_soil_layers , flag_soil_levels , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
ELSE IF ( ( sf_surface_physics .EQ. 7 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_7 ( zs , dzs , num_soil_layers )
CALL init_soil_7_real ( tsk , tmn , smois , sh2o, tslb , &
st_input , sm_input , sw_input, landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , sw_levels_input, &
num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
flag_sst , flag_soil_layers , flag_soil_levels , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
END IF
END SUBROUTINE process_soil_real
SUBROUTINE process_soil_ideal (docs) ( xland,xice,vegfra,snow,canwat, & 2,10
ivgtyp,isltyp,tslb,smois, &
tsk,tmn,zs,dzs, &
num_soil_layers, &
sf_surface_physics , &
ids,ide, jds,jde, kds,kde,&
ims,ime, jms,jme, kms,kme,&
its,ite, jts,jte, kts,kte )
IMPLICIT NONE
INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte
INTEGER, INTENT(IN) :: num_soil_layers , sf_surface_physics
REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(INOUT) :: smois, tslb
REAL, DIMENSION(num_soil_layers), INTENT(OUT) :: dzs,zs
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(INOUT) :: tsk, tmn
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: xland, snow, canwat, xice, vegfra
INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp
! Local variables.
INTEGER :: itf,jtf
itf=MIN(ite,ide-1)
jtf=MIN(jte,jde-1)
IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_1 ( zs , dzs , num_soil_layers )
CALL init_soil_1_ideal(tsk,tmn,tslb,xland, &
ivgtyp,zs,dzs,num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
ELSE IF ( ( sf_surface_physics .EQ. 2 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_2 ( zs , dzs , num_soil_layers )
CALL init_soil_2_ideal ( xland,xice,vegfra,snow,canwat, &
ivgtyp,isltyp,tslb,smois,tmn, &
num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_3 ( zs , dzs , num_soil_layers )
END IF
END SUBROUTINE process_soil_ideal
SUBROUTINE adjust_soil_temp_new (docs) ( tmn , sf_surface_physics , tsk , ter , & 1,4
toposoil , landmask , st_input , st_levels_input, &
flag_toposoil , flag_tavgsfc , &
flag_soil_layers , flag_soil_levels, &
num_st_levels_input, num_st_levels_alloc, &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: num_st_levels_input, num_st_levels_alloc
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: ter , toposoil , landmask
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tmn , tsk
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(IN) :: st_levels_input
INTEGER , INTENT(IN) :: sf_surface_physics , flag_toposoil , flag_tavgsfc
INTEGER , INTENT(IN) :: flag_soil_layers , flag_soil_levels
INTEGER :: i , j, k , st_near_sfc
REAL :: soil_elev_min_val , soil_elev_max_val , soil_elev_min_dif , soil_elev_max_dif
! Adjust the annual mean temperature as if it is based on from a sea-level elevation
! if the value used is from the actual annula mean data set. If the input field to
! be used for tmn is one of the first-guess input temp fields, need to do an adjustment
! only on the diff in topo from the model terrain and the first-guess terrain.
SELECT CASE ( sf_surface_physics )
CASE (LSMSCHEME)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF (landmask(i,j) .GT. 0.5 ) THEN
tmn(i,j) = tmn(i,j) - 0.0065 * ter(i,j)
END IF
END DO
END DO
CASE (RUCLSMSCHEME)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF (landmask(i,j) .GT. 0.5 ) THEN
tmn(i,j) = tmn(i,j) - 0.0065 * ter(i,j)
END IF
END DO
END DO
END SELECT
! Do we have a soil field with which to modify soil temperatures?
IF ( flag_toposoil .EQ. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
! Is the toposoil field OK, or is it a subversive soil elevation field. We can tell
! usually by looking at values. Anything less than -1000 m (lower than the Dead Sea) is
! bad. Anything larger than 10 km (taller than Everest) is toast. Also, anything where
! the difference between the soil elevation and the terrain is greater than 3 km means
! that the soil data is either all zeros or that the data are inconsistent. Any of these
! three conditions is grievous enough to induce a WRF fatality. However, if they are at
! a water point, then we can safely ignore them.
soil_elev_min_val = toposoil(i,j)
soil_elev_max_val = toposoil(i,j)
soil_elev_min_dif = ter(i,j) - toposoil(i,j)
soil_elev_max_dif = ter(i,j) - toposoil(i,j)
IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN
CYCLE
ELSE IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN
!print *,'no soil temperature elevation adjustment, soil height too small = ',toposoil(i,j)
cycle
! CALL wrf_error_fatal ( 'TOPOSOIL values have large negative values < -1000 m, unrealistic.' )
ENDIF
IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN
CYCLE
ELSE IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN
print *,'no soil temperature elevation adjustment, soil height too high = ',toposoil(i,j)
cycle
CALL wrf_error_fatal ( 'TOPOSOIL values have large positive values > 10,000 m , unrealistic.' )
ENDIF
IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. &
( landmask(i,j) .LT. 0.5 ) ) THEN
CYCLE
ELSE IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. &
( landmask(i,j) .GT. 0.5 ) ) THEN
print *,'no soil temperature elevation adjustment, diff of soil height and terrain = ',ter(i,j) - toposoil(i,j)
cycle
CALL wrf_error_fatal ( 'TOPOSOIL difference with terrain elevation differs by more than 3000 m, unrealistic' )
ENDIF
! For each of the fields that we would like to modify, check to see if it came in from the SI.
! If so, then use a -6.5 K/km lapse rate (based on the elevation diffs). We only adjust when we
! are not at a water point.
IF (landmask(i,j) .GT. 0.5 ) THEN
IF ( sf_surface_physics .EQ. SLABSCHEME ) THEN
st_near_sfc = 0 ! Check if there is a soil layer above 40 cm
DO k = 1, num_st_levels_input
IF ( st_levels_input(k) .LE. 40 ) THEN
st_near_sfc = 1
END IF
END DO
IF ( ( flag_tavgsfc == 1 ) .OR. ( st_near_sfc == 1 ) ) THEN
tmn(i,j) = tmn(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
ELSE
tmn(i,j) = tmn(i,j) - 0.0065 * ter(i,j)
END IF
END IF
tsk(i,j) = tsk(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
IF ( flag_soil_layers == 1 ) THEN
DO k = 2, num_st_levels_input+1
st_input(i,k,j) = st_input(i,k,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END DO
ELSE
DO k = 1, num_st_levels_input
st_input(i,k,j) = st_input(i,k,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END DO
END IF
END IF
END DO
END DO
END IF
END SUBROUTINE adjust_soil_temp_new
SUBROUTINE init_soil_depth_1 (docs) ( zs , dzs , num_soil_layers ) 4,2
IMPLICIT NONE
INTEGER, INTENT(IN) :: num_soil_layers
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
INTEGER :: l
! Define layers (top layer = 0.01 m). Double the thicknesses at each step (dzs values).
! The distance from the ground level to the midpoint of the layer is given by zs.
! ------- Ground Level ---------- || || || ||
! || || || || zs(1) = 0.005 m
! -- -- -- -- -- -- -- -- -- || || || \/
! || || ||
! ----------------------------------- || || || \/ dzs(1) = 0.01 m
! || || ||
! || || || zs(2) = 0.02
! -- -- -- -- -- -- -- -- -- || || \/
! || ||
! || ||
! ----------------------------------- || || \/ dzs(2) = 0.02 m
! || ||
! || ||
! || ||
! || || zs(3) = 0.05
! -- -- -- -- -- -- -- -- -- || \/
! ||
! ||
! ||
! ||
! ----------------------------------- \/ dzs(3) = 0.04 m
IF ( num_soil_layers .NE. 5 ) THEN
PRINT '(A)','Usually, the 5-layer diffusion uses 5 layers. Change this in the namelist.'
CALL wrf_error_fatal ( '5-layer_diffusion_uses_5_layers' )
END IF
dzs(1)=.01
zs(1)=.5*dzs(1)
DO l=2,num_soil_layers
dzs(l)=2*dzs(l-1)
zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l)
ENDDO
END SUBROUTINE init_soil_depth_1
SUBROUTINE init_soil_depth_2 (docs) ( zs , dzs , num_soil_layers ) 4,2
IMPLICIT NONE
INTEGER, INTENT(IN) :: num_soil_layers
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
INTEGER :: l
dzs = (/ 0.1 , 0.3 , 0.6 , 1.0 /)
IF ( num_soil_layers .NE. 4 ) THEN
PRINT '(A)','Usually, the LSM uses 4 layers. Change this in the namelist.'
CALL wrf_error_fatal ( 'LSM_uses_4_layers' )
END IF
zs(1)=.5*dzs(1)
DO l=2,num_soil_layers
zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l)
ENDDO
END SUBROUTINE init_soil_depth_2
SUBROUTINE init_soil_depth_3 (docs) ( zs , dzs , num_soil_layers ) 4,2
IMPLICIT NONE
INTEGER, INTENT(IN) :: num_soil_layers
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
INTEGER :: l
CHARACTER (LEN=132) :: message
! in RUC LSM ZS - soil levels, and DZS - soil layer thicknesses, not used
! ZS is specified in the namelist: num_soil_layers = 6 or 9.
! Other options with number of levels are possible, but
! WRF users should change consistently the namelist entry with the
! ZS array in this subroutine.
IF ( num_soil_layers .EQ. 6) THEN
zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 1.60 , 3.00 /)
! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /)
ELSEIF ( num_soil_layers .EQ. 9) THEN
zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 0.60, 1.00, 1.60 , 2.20, 3.00 /)
! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /)
ENDIF
IF ( num_soil_layers .EQ. 4 .OR. num_soil_layers .EQ. 5 ) THEN
write (message, FMT='(A)') 'The RUC LSM uses 6, 9 or more levels. Change this in the namelist.'
CALL wrf_error_fatal ( message )
END IF
END SUBROUTINE init_soil_depth_3
SUBROUTINE init_soil_depth_7 (docs) ( zs , dzs , num_soil_layers ) 1,1
IMPLICIT NONE
INTEGER, INTENT(IN) :: num_soil_layers
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
INTEGER :: l
dzs = (/ 0.01 , 0.99 /)
IF ( num_soil_layers .NE. 2 ) THEN
PRINT '(A)','Usually, the PX LSM uses 2 layers. Change this in the namelist.'
CALL wrf_error_fatal ( 'PXLSM_uses_2_layers' )
END IF
zs(1) = 0.5 * dzs(1)
zs(2) = dzs(1) + 0.5 * dzs(2)
END SUBROUTINE init_soil_depth_7
SUBROUTINE init_soil_1_real (docs) ( tsk , tmn , tslb , zs , dzs , & 2
num_soil_layers , real_data_init_type , &
landmask , sst , flag_sst , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: num_soil_layers , real_data_init_type , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: flag_sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tsk , tmn
REAL , DIMENSION(num_soil_layers) :: zs , dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb
INTEGER :: i , j , l
! Soil temperature is linearly interpolated between the skin temperature (taken to be at a
! depth of 0.5 cm) and the deep soil, annual temperature (taken to be at a depth of 23 cm).
! The tslb(i,1,j) is the skin temperature, and the tslb(i,num_soil_layers,j) level is the
! annual mean temperature.
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .GT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= ( tsk(i,j) * ( zs(num_soil_layers) - zs(l) ) + &
tmn(i,j) * ( zs( l) - zs(1) ) ) / &
( zs(num_soil_layers) - zs(1) )
END DO
ELSE
IF ( ( real_data_init_type .EQ. 1 ) .AND. ( flag_sst .EQ. 1 ) ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= sst(i,j)
END DO
ELSE
DO l = 1 , num_soil_layers
tslb(i,l,j)= tsk(i,j)
END DO
END IF
END IF
END DO
END DO
END SUBROUTINE init_soil_1_real
SUBROUTINE init_soil_1_ideal (docs) (tsk,tmn,tslb,xland, & 2
ivgtyp,ZS,DZS,num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
IMPLICIT NONE
INTEGER, INTENT(IN ) :: ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte
INTEGER, INTENT(IN ) :: num_soil_layers
REAL, DIMENSION( ims:ime , num_soil_layers , jms:jme ), INTENT(OUT) :: tslb
REAL, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: xland
INTEGER, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: ivgtyp
REAL, DIMENSION(1:), INTENT(IN) :: dzs,zs
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(IN) :: tsk, tmn
! Lcal variables.
INTEGER :: l,j,i,itf,jtf
itf=MIN(ite,ide-1)
jtf=MIN(jte,jde-1)
IF (num_soil_layers.NE.1)THEN
DO j=jts,jtf
DO l=1,num_soil_layers
DO i=its,itf
tslb(i,l,j)=( tsk(i,j)*(zs(num_soil_layers)-zs(l)) + tmn(i,j)*(zs(l)-zs(1)) ) / &
( zs(num_soil_layers)-zs(1) )
ENDDO
ENDDO
ENDDO
ENDIF
! DO j=jts,jtf
! DO i=its,itf
! xland(i,j) = 2
! ivgtyp(i,j) = 7
! ENDDO
! ENDDO
END SUBROUTINE init_soil_1_ideal
SUBROUTINE init_soil_2_real (docs) ( tsk , tmn , smois , sh2o , tslb , & 2,6
st_input , sm_input , sw_input , landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , sw_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
flag_sst , flag_soil_layers , flag_soil_levels , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: num_soil_layers , &
num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: flag_sst, flag_soil_layers, flag_soil_levels
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input
INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input
INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input
REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk
REAL , DIMENSION(num_soil_layers) :: zs , dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o
REAL , ALLOCATABLE , DIMENSION(:) :: zhave
INTEGER :: i , j , l , lout , lin , lwant , lhave , num
REAL :: temp
LOGICAL :: found_levels
CHARACTER (LEN=132) :: message
! Are there any soil temp and moisture levels - ya know, they are mandatory.
num = num_st_levels_input * num_sm_levels_input
IF ( num .GE. 1 ) THEN
! Ordered levels that we have data for.
!tgs add option to initialize from RUCLSM
IF ( flag_soil_levels == 1 ) THEN
write(message, FMT='(A)') ' Assume RUC LSM 6-level input'
CALL wrf_message ( message )
ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) ) )
ELSE
write(message, FMT='(A)') ' Assume Noah LSM input'
CALL wrf_message ( message )
ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) +2) )
END IF
! Sort the levels for temperature.
outert : DO lout = 1 , num_st_levels_input-1
innert : DO lin = lout+1 , num_st_levels_input
IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN
temp = st_levels_input(lout)
st_levels_input(lout) = st_levels_input(lin)
st_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = st_input(i,lout+1,j)
st_input(i,lout+1,j) = st_input(i,lin+1,j)
st_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innert
END DO outert
!tgs add IF
IF ( flag_soil_layers == 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
st_input(i,1,j) = tsk(i,j)
st_input(i,num_st_levels_input+2,j) = tmn(i,j)
END DO
END DO
ENDIF
! Sort the levels for moisture.
outerm: DO lout = 1 , num_sm_levels_input-1
innerm : DO lin = lout+1 , num_sm_levels_input
IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN
temp = sm_levels_input(lout)
sm_levels_input(lout) = sm_levels_input(lin)
sm_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sm_input(i,lout+1,j)
sm_input(i,lout+1,j) = sm_input(i,lin+1,j)
sm_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innerm
END DO outerm
!tgs add IF
IF ( flag_soil_layers == 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sm_input(i,1,j) = sm_input(i,2,j)
sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j)
END DO
END DO
ENDIF
! Sort the levels for liquid moisture.
outerw: DO lout = 1 , num_sw_levels_input-1
innerw : DO lin = lout+1 , num_sw_levels_input
IF ( sw_levels_input(lout) .GT. sw_levels_input(lin) ) THEN
temp = sw_levels_input(lout)
sw_levels_input(lout) = sw_levels_input(lin)
sw_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sw_input(i,lout+1,j)
sw_input(i,lout+1,j) = sw_input(i,lin+1,j)
sw_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innerw
END DO outerw
IF ( num_sw_levels_input .GT. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sw_input(i,1,j) = sw_input(i,2,j)
sw_input(i,num_sw_levels_input+2,j) = sw_input(i,num_sw_levels_input+1,j)
END DO
END DO
END IF
found_levels = .TRUE.
ELSE IF ( ( num .LE. 0 ) .AND. ( start_date .NE. current_date ) ) THEN
found_levels = .FALSE.
ELSE
CALL wrf_error_fatal ( &
'No input soil level data (temperature, moisture or liquid, or all are missing). Required for LSM.' )
END IF
! Is it OK to continue?
IF ( found_levels ) THEN
!tgs: Here are the levels that we have from the input for temperature.
IF ( flag_soil_levels == 1 ) THEN
DO l = 1 , num_st_levels_input
zhave(l) = st_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt : DO lwant = 1 , num_soil_layers
z_havet : DO lhave = 1 , num_st_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet
END IF
END DO z_havet
END DO z_wantt
ELSE
! Here are the levels that we have from the input for temperature. The input levels plus
! two more: the skin temperature at 0 cm, and the annual mean temperature at 300 cm.
zhave(1) = 0.
DO l = 1 , num_st_levels_input
zhave(l+1) = st_levels_input(l) / 100.
END DO
zhave(num_st_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt_2: DO lwant = 1 , num_soil_layers
z_havet_2 : DO lhave = 1 , num_st_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet_2
END IF
END DO z_havet_2
END DO z_wantt_2
END IF
!tgs:
IF ( flag_soil_levels == 1 ) THEN
DO l = 1 , num_sm_levels_input
zhave(l) = sm_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantm : DO lwant = 1 , num_soil_layers
z_havem : DO lhave = 1 , num_sm_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem
END IF
END DO z_havem
END DO z_wantm
ELSE
! Here are the levels that we have from the input for moisture. The input levels plus
! two more: a value at 0 cm and one at 300 cm. The 0 cm value is taken to be identical
! to the most shallow layer's value. Similarly, the 300 cm value is taken to be the same
! as the most deep layer's value.
zhave(1) = 0.
DO l = 1 , num_sm_levels_input
zhave(l+1) = sm_levels_input(l) / 100.
END DO
zhave(num_sm_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantm_2 : DO lwant = 1 , num_soil_layers
z_havem_2 : DO lhave = 1 , num_sm_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem_2
END IF
END DO z_havem_2
END DO z_wantm_2
ENDIF
! Any liquid soil moisture to worry about?
IF ( num_sw_levels_input .GT. 1 ) THEN
zhave(1) = 0.
DO l = 1 , num_sw_levels_input
zhave(l+1) = sw_levels_input(l) / 100.
END DO
zhave(num_sw_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantw : DO lwant = 1 , num_soil_layers
z_havew : DO lhave = 1 , num_sw_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sh2o(i,lwant,j)= ( sw_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
sw_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havew
END IF
END DO z_havew
END DO z_wantw
END IF
! Over water, put in reasonable values for soil temperature and moisture. These won't be
! used, but they will make a more continuous plot.
IF ( flag_sst .EQ. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= sst(i,j)
smois(i,l,j)= 1.0
sh2o (i,l,j)= 1.0
END DO
END IF
END DO
END DO
ELSE
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= tsk(i,j)
smois(i,l,j)= 1.0
sh2o (i,l,j)= 1.0
END DO
END IF
END DO
END DO
END IF
DEALLOCATE (zhave)
END IF
END SUBROUTINE init_soil_2_real
SUBROUTINE init_soil_2_ideal (docs) ( xland,xice,vegfra,snow,canwat, & 2
ivgtyp,isltyp,tslb,smois,tmn, &
num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
IMPLICIT NONE
INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte
INTEGER, INTENT(IN) ::num_soil_layers
REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(OUT) :: smois, tslb
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(IN) :: xland
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: snow, canwat, xice, vegfra, tmn
INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp
INTEGER :: icm,jcm,itf,jtf
INTEGER :: i,j,l
itf=min0(ite,ide-1)
jtf=min0(jte,jde-1)
icm = ide/2
jcm = jde/2
DO j=jts,jtf
DO l=1,num_soil_layers
DO i=its,itf
if (xland(i,j) .lt. 1.5) then
smois(i,1,j)=0.30
smois(i,2,j)=0.30
smois(i,3,j)=0.30
smois(i,4,j)=0.30
tslb(i,1,j)=290.
tslb(i,2,j)=290.
tslb(i,3,j)=290.
tslb(i,4,j)=290.
endif
ENDDO
ENDDO
ENDDO
END SUBROUTINE init_soil_2_ideal
SUBROUTINE init_soil_3_real (docs) ( tsk , tmn , smois , tslb , & 2,4
st_input , sm_input , landmask, sst, &
zs , dzs , &
st_levels_input , sm_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , &
flag_sst , flag_soil_layers , flag_soil_levels , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: num_soil_layers , &
num_st_levels_input , num_sm_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: flag_sst, flag_soil_layers, flag_soil_levels
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input
INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk
REAL , DIMENSION(num_soil_layers) :: zs , dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois
REAL , ALLOCATABLE , DIMENSION(:) :: zhave
INTEGER :: i , j , l , lout , lin , lwant , lhave, k
REAL :: temp
CHARACTER (LEN=132) :: message
! Allocate the soil layer array used for interpolating.
IF ( ( num_st_levels_input .LE. 0 ) .OR. &
( num_sm_levels_input .LE. 0 ) ) THEN
write (message, FMT='(A)')&
'No input soil level data (either temperature or moisture, or both are missing). Required for RUC LSM.'
CALL wrf_error_fatal ( message )
ELSE
IF ( flag_soil_levels == 1 ) THEN
write(message, FMT='(A)') ' Assume RUC LSM 6-level input'
CALL wrf_message ( message )
ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input) ) )
ELSE
write(message, FMT='(A)') ' Assume non-RUC LSM input'
CALL wrf_message ( message )
ALLOCATE ( zhave( MAX(num_st_levels_input,num_soil_layers) ) )
END IF
END IF
! Sort the levels for temperature.
outert : DO lout = 1 , num_st_levels_input-1
innert : DO lin = lout+1 , num_st_levels_input
IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN
temp = st_levels_input(lout)
st_levels_input(lout) = st_levels_input(lin)
st_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = st_input(i,lout,j)
st_input(i,lout,j) = st_input(i,lin,j)
st_input(i,lin,j) = temp
END DO
END DO
END IF
END DO innert
END DO outert
IF ( flag_soil_layers == 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
st_input(i,1,j) = tsk(i,j)
st_input(i,num_st_levels_input+2,j) = tmn(i,j)
END DO
END DO
END IF
! Sort the levels for moisture.
outerm: DO lout = 1 , num_sm_levels_input-1
innerm : DO lin = lout+1 , num_sm_levels_input
IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN
temp = sm_levels_input(lout)
sm_levels_input(lout) = sm_levels_input(lin)
sm_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sm_input(i,lout,j)
sm_input(i,lout,j) = sm_input(i,lin,j)
sm_input(i,lin,j) = temp
END DO
END DO
END IF
END DO innerm
END DO outerm
IF ( flag_soil_layers == 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sm_input(i,1,j) = (sm_input(i,2,j)-sm_input(i,3,j))/ &
(st_levels_input(2)-st_levels_input(1))*st_levels_input(1)+ &
sm_input(i,2,j)
! sm_input(i,1,j) = sm_input(i,2,j)
sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j)
END DO
END DO
END IF
! Here are the levels that we have from the input for temperature.
IF ( flag_soil_levels == 1 ) THEN
DO l = 1 , num_st_levels_input
zhave(l) = st_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt : DO lwant = 1 , num_soil_layers
z_havet : DO lhave = 1 , num_st_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet
END IF
END DO z_havet
END DO z_wantt
ELSE
zhave(1) = 0.
DO l = 1 , num_st_levels_input
zhave(l+1) = st_levels_input(l) / 100.
END DO
zhave(num_st_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt_2 : DO lwant = 1 , num_soil_layers
z_havet_2 : DO lhave = 1 , num_st_levels_input +2
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet_2
END IF
END DO z_havet_2
END DO z_wantt_2
END IF
! Here are the levels that we have from the input for moisture.
IF ( flag_soil_levels .EQ. 1 ) THEN
DO l = 1 , num_sm_levels_input
zhave(l) = sm_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantm : DO lwant = 1 , num_soil_layers
z_havem : DO lhave = 1 , num_sm_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem
END IF
END DO z_havem
END DO z_wantm
ELSE
zhave(1) = 0.
DO l = 1 , num_sm_levels_input
zhave(l+1) = sm_levels_input(l) / 100.
END DO
zhave(num_sm_levels_input+2) = 300. / 100.
z_wantm_2 : DO lwant = 1 , num_soil_layers
z_havem_2 : DO lhave = 1 , num_sm_levels_input +2
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem_2
END IF
END DO z_havem_2
END DO z_wantm_2
END IF
! Over water, put in reasonable values for soil temperature and moisture. These won't be
! used, but they will make a more continuous plot.
IF ( flag_sst .EQ. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j) = sst(i,j)
tsk(i,j) = sst(i,j)
smois(i,l,j)= 1.0
END DO
END IF
END DO
END DO
ELSE
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= tsk(i,j)
smois(i,l,j)= 1.0
END DO
END IF
END DO
END DO
END IF
DEALLOCATE (zhave)
END SUBROUTINE init_soil_3_real
SUBROUTINE init_soil_7_real (docs) ( tsk , tmn , smois , sh2o , tslb , & 1,3
st_input , sm_input , sw_input , landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , sw_levels_input , &
num_soil_layers , num_st_levels_input , &
num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , &
num_sw_levels_alloc , &
flag_sst , flag_soil_layers , flag_soil_levels , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
! for soil temperature and moisture initialization for the PX LSM
IMPLICIT NONE
INTEGER , INTENT(IN) :: num_soil_layers , &
num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: flag_sst, flag_soil_layers, flag_soil_levels
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input
INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input
INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input
REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk
REAL , DIMENSION(num_soil_layers) :: zs , dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o
REAL , ALLOCATABLE , DIMENSION(:) :: zhave
INTEGER :: i , j , l , lout , lin , lwant , lhave , num
REAL :: temp
LOGICAL :: found_levels
! Are there any soil temp and moisture levels - ya know, they are mandatory.
num = num_st_levels_input * num_sm_levels_input
IF ( num .GE. 1 ) THEN
! Ordered levels that we have data for.
ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) +2) )
! Sort the levels for temperature.
outert : DO lout = 1 , num_st_levels_input-1
innert : DO lin = lout+1 , num_st_levels_input
IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN
temp = st_levels_input(lout)
st_levels_input(lout) = st_levels_input(lin)
st_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = st_input(i,lout+1,j)
st_input(i,lout+1,j) = st_input(i,lin+1,j)
st_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innert
END DO outert
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
st_input(i,1,j) = tsk(i,j)
st_input(i,num_st_levels_input+2,j) = tmn(i,j)
END DO
END DO
! Sort the levels for moisture.
outerm: DO lout = 1 , num_sm_levels_input-1
innerm : DO lin = lout+1 , num_sm_levels_input
IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN
temp = sm_levels_input(lout)
sm_levels_input(lout) = sm_levels_input(lin)
sm_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sm_input(i,lout+1,j)
sm_input(i,lout+1,j) = sm_input(i,lin+1,j)
sm_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innerm
END DO outerm
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sm_input(i,1,j) = sm_input(i,2,j)
sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j)
END DO
END DO
! Sort the levels for liquid moisture.
outerw: DO lout = 1 , num_sw_levels_input-1
innerw : DO lin = lout+1 , num_sw_levels_input
IF ( sw_levels_input(lout) .GT. sw_levels_input(lin) ) THEN
temp = sw_levels_input(lout)
sw_levels_input(lout) = sw_levels_input(lin)
sw_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sw_input(i,lout+1,j)
sw_input(i,lout+1,j) = sw_input(i,lin+1,j)
sw_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innerw
END DO outerw
IF ( num_sw_levels_input .GT. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sw_input(i,1,j) = sw_input(i,2,j)
sw_input(i,num_sw_levels_input+2,j) = sw_input(i,num_sw_levels_input+1,j)
END DO
END DO
END IF
found_levels = .TRUE.
ELSE IF ( ( num .LE. 0 ) .AND. ( start_date .NE. current_date ) ) THEN
found_levels = .FALSE.
ELSE
CALL wrf_error_fatal ( &
'No input soil level data (temperature, moisture or liquid, or all are missing). Required for PX LSM.' )
END IF
! Is it OK to continue?
IF ( found_levels ) THEN
! Here are the levels that we have from the input for temperature. The input levels plus
! two more: the skin temperature at 0 cm, and the annual mean temperature at 300 cm.
zhave(1) = 0.
DO l = 1 , num_st_levels_input
zhave(l+1) = st_levels_input(l) / 100.
END DO
zhave(num_st_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt : DO lwant = 1 , num_soil_layers
z_havet : DO lhave = 1 , num_st_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet
END IF
END DO z_havet
END DO z_wantt
! Here are the levels that we have from the input for moisture. The input levels plus
! two more: a value at 0 cm and one at 300 cm. The 0 cm value is taken to be identical
! to the most shallow layer's value. Similarly, the 300 cm value is taken to be the same
! as the most deep layer's value.
zhave(1) = 0.
DO l = 1 , num_sm_levels_input
zhave(l+1) = sm_levels_input(l) / 100.
END DO
zhave(num_sm_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantm : DO lwant = 1 , num_soil_layers
z_havem : DO lhave = 1 , num_sm_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem
END IF
END DO z_havem
END DO z_wantm
! Any liquid soil moisture to worry about?
IF ( num_sw_levels_input .GT. 1 ) THEN
zhave(1) = 0.
DO l = 1 , num_sw_levels_input
zhave(l+1) = sw_levels_input(l) / 100.
END DO
zhave(num_sw_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantw : DO lwant = 1 , num_soil_layers
z_havew : DO lhave = 1 , num_sw_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sh2o(i,lwant,j)= ( sw_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
sw_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havew
END IF
END DO z_havew
END DO z_wantw
END IF
! Over water, put in reasonable values for soil temperature and moisture. These won't be
! used, but they will make a more continuous plot.
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,1,j)= tsk(i,j)
tslb(i,2,j)= tmn(i,j)
END DO
END DO
IF ( flag_sst .EQ. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= sst(i,j)
smois(i,l,j)= 1.0
sh2o (i,l,j)= 1.0
END DO
END IF
END DO
END DO
ELSE
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= tsk(i,j)
smois(i,l,j)= 1.0
sh2o (i,l,j)= 1.0
END DO
END IF
END DO
END DO
END IF
DEALLOCATE (zhave)
END IF
END SUBROUTINE init_soil_7_real
END MODULE module_soil_pre
#else
MODULE module_soil_pre (docs) 5
USE module_date_time
USE module_state_description
CONTAINS
SUBROUTINE adjust_for_seaice_pre (docs) ( xice , landmask , tsk , ivgtyp , vegcat , lu_index , & 1,6
xland , landusef , isltyp , soilcat , soilctop , &
soilcbot , tmn , &
seaice_threshold , &
fractional_seaice, &
num_veg_cat , num_soil_top_cat , num_soil_bot_cat , &
iswater , isice , &
scheme , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater , isice
INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme
REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef
REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop
REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot
INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , &
vegcat, xland , soilcat , tmn
REAL , INTENT(IN) :: seaice_threshold
INTEGER :: i , j , num_seaice_changes , loop
CHARACTER (LEN=132) :: message
integer, intent(in) :: fractional_seaice
real :: xice_threshold
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice_threshold = 0.5
ELSEIF ( FRACTIONAL_SEAICE == 1 ) THEN
CALL WRF_ERROR_FATAL("NMM cannot use FRACTIONAL_SEAICE = 1")
xice_threshold = 0.02
ENDIF
fix_seaice : SELECT CASE ( scheme )
CASE ( SLABSCHEME )
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( xice(i,j) .GT. 200.0 ) THEN
xice(i,j) = 0.
num_seaice_changes = num_seaice_changes + 1
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total pre number of sea ice locations removed (due to FLAG values) = ', &
num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
num_seaice_changes = 0
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( ( xice(i,j) .GE. xice_threshold ) .OR. &
( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice(i,j) = 1.0
ENDIF
num_seaice_changes = num_seaice_changes + 1
tmn(i,j) = 271.4
vegcat(i,j)=isice
lu_index(i,j)=ivgtyp(i,j)
landmask(i,j)=1.
xland(i,j)=1.
DO loop=1,num_veg_cat
landusef(i,loop,j)=0.
END DO
landusef(i,ivgtyp(i,j),j)=1.
isltyp(i,j) = 16
soilcat(i,j)=isltyp(i,j)
DO loop=1,num_soil_top_cat
soilctop(i,loop,j)=0
END DO
DO loop=1,num_soil_bot_cat
soilcbot(i,loop,j)=0
END DO
soilctop(i,isltyp(i,j),j)=1.
soilcbot(i,isltyp(i,j),j)=1.
ELSE
xice(i,j) = 0.0
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total pre number of sea ice location changes (water to land) = ', num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
CASE ( LSMSCHEME )
CASE ( RUCLSMSCHEME )
END SELECT fix_seaice
END SUBROUTINE adjust_for_seaice_pre
SUBROUTINE adjust_for_seaice_post (docs) ( xice , landmask , tsk , ivgtyp , vegcat , lu_index , & 1,6
xland , landusef , isltyp , soilcat , soilctop , &
soilcbot , tmn , &
tslb , smois , sh2o , &
seaice_threshold , &
fractional_seaice, &
num_veg_cat , num_soil_top_cat , num_soil_bot_cat , &
num_soil_layers , &
iswater , isice , &
scheme , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater , isice
INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat , scheme
INTEGER , INTENT(IN) :: num_soil_layers
REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landusef
REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(INOUT):: soilctop
REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(INOUT):: soilcbot
REAL , DIMENSION(ims:ime,1:num_soil_layers,jms:jme) , INTENT(INOUT):: tslb , smois , sh2o
INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask , xice , tsk , lu_index , &
vegcat, xland , soilcat , tmn
REAL , INTENT(IN) :: seaice_threshold
REAL :: total_depth , mid_point_depth
INTEGER :: i , j , num_seaice_changes , loop
CHARACTER (LEN=132) :: message
integer, intent(in) :: fractional_seaice
real :: xice_threshold
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice_threshold = 0.5
ELSEIF ( FRACTIONAL_SEAICE == 1 ) THEN
CALL WRF_ERROR_FATAL("NMM cannot use FRACTIONAL_SEAICE = 1")
xice_threshold = 0.02
ENDIF
fix_seaice : SELECT CASE ( scheme )
CASE ( SLABSCHEME )
!SBAO
CASE ( LSMSCHEME, GFDLSLAB )
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( xice(i,j) .GT. 200.0 ) THEN
xice(i,j) = 0.
num_seaice_changes = num_seaice_changes + 1
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total post number of sea ice locations removed (due to FLAG values) = ', &
num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
num_seaice_changes = 0
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( ( xice(i,j) .GE. xice_threshold ) .OR. &
( ( landmask(i,j) .LT. 0.5 ) .AND. ( tsk(i,j) .LT. seaice_threshold ) ) ) THEN
IF ( FRACTIONAL_SEAICE == 0 ) THEN
xice(i,j) = 1.0
ENDIF
num_seaice_changes = num_seaice_changes + 1
tmn(i,j) = 271.16
vegcat(i,j)=isice
lu_index(i,j)=ivgtyp(i,j)
landmask(i,j)=1.
xland(i,j)=1.
DO loop=1,num_veg_cat
landusef(i,loop,j)=0.
END DO
landusef(i,ivgtyp(i,j),j)=1.
isltyp(i,j) = 16
soilcat(i,j)=isltyp(i,j)
DO loop=1,num_soil_top_cat
soilctop(i,loop,j)=0
END DO
DO loop=1,num_soil_bot_cat
soilcbot(i,loop,j)=0
END DO
soilctop(i,isltyp(i,j),j)=1.
soilcbot(i,isltyp(i,j),j)=1.
total_depth = 3. ! ice is 3 m deep, num_soil_layers equispaced layers
DO loop = 1,num_soil_layers
mid_point_depth=(total_depth/num_soil_layers)/2. + &
(loop-1)*(total_depth/num_soil_layers)
tslb(i,loop,j) = ( (total_depth-mid_point_depth)*tsk(i,j) + &
mid_point_depth*tmn(i,j) ) / total_depth
END DO
DO loop=1,num_soil_layers
smois(i,loop,j) = 1.0
sh2o(i,loop,j) = 0.0
END DO
ELSE
xice(i,j) = 0.0
END IF
END DO
END DO
IF ( num_seaice_changes .GT. 0 ) THEN
WRITE ( message , FMT='(A,I6)' ) &
'Total post number of sea ice location changes (water to land) = ', num_seaice_changes
CALL wrf_debug ( 0 , message )
END IF
CASE ( RUCLSMSCHEME )
END SELECT fix_seaice
END SUBROUTINE adjust_for_seaice_post
SUBROUTINE process_percent_cat_new (docs) ( landmask , & 3,15
landuse_frac , soil_top_cat , soil_bot_cat , &
isltyp , ivgtyp , &
num_veg_cat , num_soil_top_cat , num_soil_bot_cat , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
iswater
INTEGER , INTENT(IN) :: num_veg_cat , num_soil_top_cat , num_soil_bot_cat
REAL , DIMENSION(ims:ime,1:num_veg_cat,jms:jme) , INTENT(INOUT):: landuse_frac
REAL , DIMENSION(ims:ime,1:num_soil_top_cat,jms:jme) , INTENT(IN):: soil_top_cat
REAL , DIMENSION(ims:ime,1:num_soil_bot_cat,jms:jme) , INTENT(IN):: soil_bot_cat
INTEGER , DIMENSION(ims:ime,jms:jme), INTENT(OUT) :: isltyp , ivgtyp
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: landmask
INTEGER :: i , j , l , ll, dominant_index
REAL :: dominant_value
#ifdef WRF_CHEM
! REAL :: lwthresh = .99
REAL :: lwthresh = .50
#else
REAL :: lwthresh = .50
#endif
INTEGER , PARAMETER :: iswater_soil = 14
INTEGER :: iforce
CHARACTER (LEN=1024) :: message
! Sanity check on the 50/50 points
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
dominant_value = landuse_frac(i,iswater,j)
IF ( dominant_value .EQ. lwthresh ) THEN
DO l = 1 , num_veg_cat
IF ( l .EQ. iswater ) CYCLE
IF ( landuse_frac(i,l,j) .EQ. lwthresh ) THEN
write(message, FMT='(I4,I4,A,I4,A,F12.4)') i,j,' water and category ',l,' both at 50%, landmask is ',landmask(i,j)
call wrf_message ( message )
landuse_frac(i,l,j) = lwthresh - .01
landuse_frac(i,iswater,j) = 1. - (lwthresh + 0.01)
END IF
END DO
END IF
END DO
END DO
! Compute the dominant VEGETATION INDEX.
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
dominant_value = landuse_frac(i,1,j)
dominant_index = 1
DO l = 2 , num_veg_cat
IF ( l .EQ. iswater ) THEN
! wait a bit
ELSE IF ( ( l .NE. iswater ) .AND. ( landuse_frac(i,l,j) .GT. dominant_value ) ) THEN
dominant_value = landuse_frac(i,l,j)
dominant_index = l
END IF
END DO
IF ( landuse_frac(i,iswater,j) .GT. lwthresh ) THEN
dominant_value = landuse_frac(i,iswater,j)
dominant_index = iswater
#if 0
si needs to beef up consistency checks before we can use this part
ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh) .AND. &
( dominant_value .EQ. lwthresh) ) THEN
! no op
#else
ELSEIF((landuse_frac(i,iswater,j).EQ.lwthresh).AND.(dominant_value.EQ.lwthresh).and.(dominant_index.LT.iswater))THEN
write(message,*)'temporary SI landmask fix'
call wrf_message(trim(message))
! no op
ELSEIF((landuse_frac(i,iswater,j).EQ.lwthresh).AND.(dominant_value.EQ.lwthresh).and.(dominant_index.GT.iswater))THEN
write(message,*)'temporary SI landmask fix'
call wrf_message(trim(message))
dominant_value = landuse_frac(i,iswater,j)
dominant_index = iswater
#endif
ELSE IF ( ( landuse_frac(i,iswater,j) .EQ. lwthresh ) .AND. &
( dominant_value .LT. lwthresh ) ) THEN
dominant_value = landuse_frac(i,iswater,j)
dominant_index = iswater
END IF
IF ( dominant_index .EQ. iswater ) THEN
if(landmask(i,j).gt.lwthresh) then
write(message,*) 'changing to water at point ',i,j
call wrf_message(trim(message))
write(message,*) nint(landuse_frac(i,:,j)*100)
call wrf_message(trim(message))
endif
landmask(i,j) = 0
ELSE IF ( dominant_index .NE. iswater ) THEN
if(landmask(i,j).lt.lwthresh) then
write(message,*) 'changing to land at point ',i,j
call wrf_message(trim(message))
write(message,*) nint(landuse_frac(i,:,j)*100)
call wrf_message(trim(message))
endif
landmask(i,j) = 1
END IF
ivgtyp(i,j) = dominant_index
END DO
END DO
! Compute the dominant SOIL TEXTURE INDEX, TOP.
iforce = 0
DO i = its , MIN(ide-1,ite)
DO j = jts , MIN(jde-1,jte)
dominant_value = soil_top_cat(i,1,j)
dominant_index = 1
IF ( landmask(i,j) .GT. lwthresh ) THEN
DO l = 2 , num_soil_top_cat
IF ( ( l .NE. iswater_soil ) .AND. ( soil_top_cat(i,l,j) .GT. dominant_value ) ) THEN
dominant_value = soil_top_cat(i,l,j)
dominant_index = l
END IF
END DO
IF ( dominant_value .LT. 0.01 ) THEN
iforce = iforce + 1
WRITE ( message , FMT = '(A,I4,I4)' ) &
'based on landuse, changing soil to land at point ',i,j
CALL wrf_debug(1,message)
WRITE ( message , FMT = '(16(i3,1x))' ) &
1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11,12, 13, 14, 15, 16
CALL wrf_debug(1,message)
WRITE ( message , FMT = '(16(i3,1x))' ) &
nint(soil_top_cat(i,:,j)*100)
CALL wrf_debug(1,message)
dominant_index = 8
END IF
ELSE
dominant_index = iswater_soil
END IF
isltyp(i,j) = dominant_index
END DO
END DO
if(iforce.ne.0)then
WRITE(message,FMT='(A,I4,A,I6)' ) &
'forcing artificial silty clay loam at ',iforce,' points, out of ',&
(MIN(ide-1,ite)-its+1)*(MIN(jde-1,jte)-jts+1)
CALL wrf_debug(0,message)
endif
END SUBROUTINE process_percent_cat_new
SUBROUTINE process_soil_real (docs) ( tsk , tmn , & 2,23
landmask , sst , &
st_input , sm_input , sw_input , st_levels_input , sm_levels_input , sw_levels_input , &
zs , dzs , tslb , smois , sh2o , &
flag_sst , flag_soilt000, flag_soilm000, &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
sf_surface_physics , num_soil_layers , real_data_init_type , &
num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte , &
sf_surface_physics , num_soil_layers , real_data_init_type , &
num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc
INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input
INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input
INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input
REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk
INTEGER :: i , j , l , dominant_index , num_soil_cat , num_veg_cat
REAL :: dominant_value
! Initialize the soil depth, and the soil temperature and moisture.
IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_1 ( zs , dzs , num_soil_layers )
CALL init_soil_1_real ( tsk , tmn , tslb , zs , dzs , num_soil_layers , real_data_init_type , &
landmask , sst , flag_sst , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
ELSE IF ( ( sf_surface_physics .EQ. 2 .or. sf_surface_physics .EQ. 99 .or. sf_surface_physics .eq. 88 ) .AND. &
( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_2 ( zs , dzs , num_soil_layers )
CALL init_soil_2_real ( tsk , tmn , smois , sh2o , tslb , &
st_input , sm_input , sw_input , landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , sw_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
flag_sst , flag_soilt000 , flag_soilm000 , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
! CALL init_soil_old ( tsk , tmn , &
! smois , tslb , zs , dzs , num_soil_layers , &
! st000010_input , st010040_input , st040100_input , st100200_input , &
! st010200_input , &
! sm000010_input , sm010040_input , sm040100_input , sm100200_input , &
! sm010200_input , &
! landmask_input , sst_input , &
! ids , ide , jds , jde , kds , kde , &
! ims , ime , jms , jme , kms , kme , &
! its , ite , jts , jte , kts , kte )
ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_3 ( zs , dzs , num_soil_layers )
CALL init_soil_3_real ( tsk , tmn , smois , tslb , &
st_input , sm_input , landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , &
flag_sst , flag_soilt000 , flag_soilm000 , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
END IF
END SUBROUTINE process_soil_real
SUBROUTINE process_soil_ideal (docs) ( xland,xice,vegfra,snow,canwat, & 2,10
ivgtyp,isltyp,tslb,smois, &
tsk,tmn,zs,dzs, &
num_soil_layers, &
sf_surface_physics , &
ids,ide, jds,jde, kds,kde,&
ims,ime, jms,jme, kms,kme,&
its,ite, jts,jte, kts,kte )
IMPLICIT NONE
INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte
INTEGER, INTENT(IN) :: num_soil_layers , sf_surface_physics
REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(INOUT) :: smois, tslb
REAL, DIMENSION(num_soil_layers), INTENT(OUT) :: dzs,zs
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(INOUT) :: tsk, tmn
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: xland, snow, canwat, xice, vegfra
INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp
! Local variables.
INTEGER :: itf,jtf
itf=MIN(ite,ide-1)
jtf=MIN(jte,jde-1)
IF ( ( sf_surface_physics .EQ. 1 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_1 ( zs , dzs , num_soil_layers )
CALL init_soil_1_ideal(tsk,tmn,tslb,xland, &
ivgtyp,zs,dzs,num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
ELSE IF ( ( sf_surface_physics .EQ. 2 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_2 ( zs , dzs , num_soil_layers )
CALL init_soil_2_ideal ( xland,xice,vegfra,snow,canwat, &
ivgtyp,isltyp,tslb,smois,tmn, &
num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
ELSE IF ( ( sf_surface_physics .EQ. 3 ) .AND. ( num_soil_layers .GT. 1 ) ) THEN
CALL init_soil_depth_3 ( zs , dzs , num_soil_layers )
END IF
END SUBROUTINE process_soil_ideal
SUBROUTINE adjust_soil_temp_new (docs) ( tmn , sf_surface_physics , & 1,4
tsk , ter , toposoil , landmask , flag_toposoil , &
st000010 , st010040 , st040100 , st100200 , st010200 , &
flag_st000010 , flag_st010040 , flag_st040100 , flag_st100200 , flag_st010200 , &
soilt000 , soilt005 , soilt020 , soilt040 , soilt160 , soilt300 , &
flag_soilt000 , flag_soilt005 , flag_soilt020 , flag_soilt040 , flag_soilt160 , flag_soilt300 , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: ter , toposoil , landmask
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tmn , tsk
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: st000010 , st010040 , st040100 , st100200 , st010200
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: soilt000 , soilt005 , soilt020 , soilt040 , soilt160 , soilt300
INTEGER , INTENT(IN) :: flag_st000010 , flag_st010040 , flag_st040100 , flag_st100200 , flag_st010200
INTEGER , INTENT(IN) :: flag_soilt000 , flag_soilt005 , flag_soilt020 , flag_soilt040 , flag_soilt160 , flag_soilt300
INTEGER , INTENT(IN) :: sf_surface_physics , flag_toposoil
INTEGER :: i , j
REAL :: soil_elev_min_val , soil_elev_max_val , soil_elev_min_dif , soil_elev_max_dif
! Do we have a soil field with which to modify soil temperatures?
IF ( flag_toposoil .EQ. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
! Is the toposoil field OK, or is it a subversive soil elevation field. We can tell
! usually by looking at values. Anything less than -1000 m (lower than the Dead Sea) is
! bad. Anything larger than 10 km (taller than Everest) is toast. Also, anything where
! the difference between the soil elevation and the terrain is greater than 3 km means
! that the soil data is either all zeros or that the data are inconsistent. Any of these
! three conditions is grievous enough to induce a WRF fatality. However, if they are at
! a water point, then we can safely ignore them.
soil_elev_min_val = toposoil(i,j)
soil_elev_max_val = toposoil(i,j)
soil_elev_min_dif = ter(i,j) - toposoil(i,j)
soil_elev_max_dif = ter(i,j) - toposoil(i,j)
IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN
CYCLE
ELSE IF ( ( soil_elev_min_val .LT. -1000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN
!print *,'no soil temperature elevation adjustment, soil height too small = ',toposoil(i,j)
cycle
! CALL wrf_error_fatal ( 'TOPOSOIL values have large negative values < -1000 m, unrealistic.' )
ENDIF
IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .LT. 0.5 ) ) THEN
CYCLE
ELSE IF ( ( soil_elev_max_val .GT. 10000 ) .AND. ( landmask(i,j) .GT. 0.5 ) ) THEN
print *,'no soil temperature elevation adjustment, soil height too high = ',toposoil(i,j)
cycle
CALL wrf_error_fatal ( 'TOPOSOIL values have large positive values > 10,000 m , unrealistic.' )
ENDIF
IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. &
( landmask(i,j) .LT. 0.5 ) ) THEN
CYCLE
ELSE IF ( ( ( soil_elev_min_dif .LT. -3000 ) .OR. ( soil_elev_max_dif .GT. 3000 ) ) .AND. &
( landmask(i,j) .GT. 0.5 ) ) THEN
print *,'no soil temperature elevation adjustment, diff of soil height and terrain = ',ter(i,j) - toposoil(i,j)
cycle
CALL wrf_error_fatal ( 'TOPOSOIL difference with terrain elevation differs by more than 3000 m, unrealistic' )
ENDIF
! For each of the fields that we would like to modify, check to see if it came in from the SI.
! If so, then use a -6.5 K/km lapse rate (based on the elevation diffs). We only adjust when we
! are not at a water point.
IF (landmask(i,j) .GT. 0.5 ) THEN
IF ( sf_surface_physics .EQ. 1 .OR. sf_surface_physics .EQ. 7) THEN
tmn(i,j) = tmn(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
tsk(i,j) = tsk(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
IF ( flag_st000010 .EQ. 1 ) THEN
st000010(i,j) = st000010(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_st010040 .EQ. 1 ) THEN
st010040(i,j) = st010040(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_st040100 .EQ. 1 ) THEN
st040100(i,j) = st040100(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_st100200 .EQ. 1 ) THEN
st100200(i,j) = st100200(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_st010200 .EQ. 1 ) THEN
st010200(i,j) = st010200(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_soilt000 .EQ. 1 ) THEN
soilt000(i,j) = soilt000(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_soilt005 .EQ. 1 ) THEN
soilt005(i,j) = soilt005(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_soilt020 .EQ. 1 ) THEN
soilt020(i,j) = soilt020(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_soilt040 .EQ. 1 ) THEN
soilt040(i,j) = soilt040(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_soilt160 .EQ. 1 ) THEN
soilt160(i,j) = soilt160(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
IF ( flag_soilt300 .EQ. 1 ) THEN
soilt300(i,j) = soilt300(i,j) - 0.0065 * ( ter(i,j) - toposoil(i,j) )
END IF
END IF
END DO
END DO
END IF
END SUBROUTINE adjust_soil_temp_new
SUBROUTINE init_soil_depth_1 (docs) ( zs , dzs , num_soil_layers ) 4,2
IMPLICIT NONE
INTEGER, INTENT(IN) :: num_soil_layers
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
INTEGER :: l
CHARACTER (LEN=132) :: message
! Define layers (top layer = 0.01 m). Double the thicknesses at each step (dzs values).
! The distance from the ground level to the midpoint of the layer is given by zs.
! ------- Ground Level ---------- || || || ||
! || || || || zs(1) = 0.005 m
! -- -- -- -- -- -- -- -- -- || || || \/
! || || ||
! ----------------------------------- || || || \/ dzs(1) = 0.01 m
! || || ||
! || || || zs(2) = 0.02
! -- -- -- -- -- -- -- -- -- || || \/
! || ||
! || ||
! ----------------------------------- || || \/ dzs(2) = 0.02 m
! || ||
! || ||
! || ||
! || || zs(3) = 0.05
! -- -- -- -- -- -- -- -- -- || \/
! ||
! ||
! ||
! ||
! ----------------------------------- \/ dzs(3) = 0.04 m
IF ( num_soil_layers .NE. 5 ) THEN
write(message,FMT= '(A)') 'Usually, the 5-layer diffusion uses 5 layers. Change this in the namelist.'
CALL wrf_error_fatal ( message )
END IF
dzs(1)=.01
zs(1)=.5*dzs(1)
DO l=2,num_soil_layers
dzs(l)=2*dzs(l-1)
zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l)
ENDDO
END SUBROUTINE init_soil_depth_1
SUBROUTINE init_soil_depth_2 (docs) ( zs , dzs , num_soil_layers ) 4,2
IMPLICIT NONE
INTEGER, INTENT(IN) :: num_soil_layers
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
INTEGER :: l
CHARACTER (LEN=132) :: message
dzs = (/ 0.1 , 0.3 , 0.6 , 1.0 /)
IF ( num_soil_layers .NE. 4 ) THEN
write(message,FMT='(A)') 'Usually, the LSM uses 4 layers. Change this in the namelist.'
CALL wrf_error_fatal ( message )
END IF
zs(1)=.5*dzs(1)
DO l=2,num_soil_layers
zs(l)=zs(l-1)+.5*dzs(l-1)+.5*dzs(l)
ENDDO
END SUBROUTINE init_soil_depth_2
SUBROUTINE init_soil_depth_3 (docs) ( zs , dzs , num_soil_layers ) 4,2
IMPLICIT NONE
INTEGER, INTENT(IN) :: num_soil_layers
REAL, DIMENSION(1:num_soil_layers), INTENT(OUT) :: zs,dzs
INTEGER :: l
CHARACTER (LEN=132) :: message
! in RUC LSM ZS - soil levels, and DZS - soil layer thicknesses, not used
! ZS is specified in the namelist: num_soil_layers = 6 or 9.
! Other options with number of levels are possible, but
! WRF users should change consistently the namelist entry with the
! ZS array in this subroutine.
IF ( num_soil_layers .EQ. 6) THEN
zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 1.60 , 3.00 /)
! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /)
ELSEIF ( num_soil_layers .EQ. 9) THEN
zs = (/ 0.00 , 0.05 , 0.20 , 0.40 , 0.60, 1.00, 1.60 , 2.20, 3.00 /)
! dzs = (/ 0.00 , 0.125, 0.175 , 0.70 , 1.30 , 1.40 /)
ENDIF
IF ( num_soil_layers .EQ. 4 .OR. num_soil_layers .EQ. 5 ) THEN
WRITE(message,FMT= '(A)')'Usually, the RUC LSM uses 6, 9 or more levels. Change this in the namelist.'
CALL wrf_error_fatal ( message )
END IF
END SUBROUTINE init_soil_depth_3
SUBROUTINE init_soil_1_real (docs) ( tsk , tmn , tslb , zs , dzs , & 2
num_soil_layers , real_data_init_type , &
landmask , sst , flag_sst , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: num_soil_layers , real_data_init_type , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: flag_sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tsk , tmn
REAL , DIMENSION(num_soil_layers) :: zs , dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb
INTEGER :: i , j , l
! Soil temperature is linearly interpolated between the skin temperature (taken to be at a
! depth of 0.5 cm) and the deep soil, annual temperature (taken to be at a depth of 23 cm).
! The tslb(i,1,j) is the skin temperature, and the tslb(i,num_soil_layers,j) level is the
! annual mean temperature.
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .GT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= ( tsk(i,j) * ( zs(num_soil_layers) - zs(l) ) + &
tmn(i,j) * ( zs( l) - zs(1) ) ) / &
( zs(num_soil_layers) - zs(1) )
END DO
ELSE
IF ( ( real_data_init_type .EQ. 1 ) .AND. ( flag_sst .EQ. 1 ) ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= sst(i,j)
END DO
ELSE
DO l = 1 , num_soil_layers
tslb(i,l,j)= tsk(i,j)
END DO
END IF
END IF
END DO
END DO
END SUBROUTINE init_soil_1_real
SUBROUTINE init_soil_1_ideal (docs) (tsk,tmn,tslb,xland, & 2
ivgtyp,ZS,DZS,num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
IMPLICIT NONE
INTEGER, INTENT(IN ) :: ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte
INTEGER, INTENT(IN ) :: num_soil_layers
REAL, DIMENSION( ims:ime , 1 , jms:jme ), INTENT(OUT) :: tslb
REAL, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: xland
INTEGER, DIMENSION( ims:ime , jms:jme ), INTENT(OUT) :: ivgtyp
REAL, DIMENSION(1:), INTENT(IN) :: dzs,zs
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(IN) :: tsk, tmn
! Lcal variables.
INTEGER :: l,j,i,itf,jtf
itf=MIN(ite,ide-1)
jtf=MIN(jte,jde-1)
IF (num_soil_layers.NE.1)THEN
DO j=jts,jtf
DO l=1,num_soil_layers
DO i=its,itf
tslb(i,l,j)=( tsk(i,j)*(zs(num_soil_layers)-zs(l)) + tmn(i,j)*(zs(l)-zs(1)) ) / &
( zs(num_soil_layers)-zs(1) )
ENDDO
ENDDO
ENDDO
ENDIF
DO j=jts,jtf
DO i=its,itf
xland(i,j) = 2
ivgtyp(i,j) = 7
ENDDO
ENDDO
END SUBROUTINE init_soil_1_ideal
SUBROUTINE init_soil_2_real (docs) ( tsk , tmn , smois , sh2o , tslb , & 2,6
st_input , sm_input , sw_input , landmask , sst , &
zs , dzs , &
st_levels_input , sm_levels_input , sw_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
flag_sst , flag_soilt000 , flag_soilm000 , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: num_soil_layers , &
num_st_levels_input , num_sm_levels_input , num_sw_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , num_sw_levels_alloc , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input
INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input
INTEGER , DIMENSION(1:num_sw_levels_input) , INTENT(INOUT) :: sw_levels_input
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input
REAL , DIMENSION(ims:ime,1:num_sw_levels_alloc,jms:jme) , INTENT(INOUT) :: sw_input
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk
REAL , DIMENSION(num_soil_layers) :: zs , dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois , sh2o
REAL , ALLOCATABLE , DIMENSION(:) :: zhave
INTEGER :: i , j , l , lout , lin , lwant , lhave , num
REAL :: temp
LOGICAL :: found_levels
CHARACTER (LEN=132) :: message
! Are there any soil temp and moisture levels - ya know, they are mandatory.
num = num_st_levels_input * num_sm_levels_input
IF ( num .GE. 1 ) THEN
! Ordered levels that we have data for.
IF ( flag_soilt000 .eq. 1 ) THEN
write(message, FMT='(A)') ' Assume RUC LSM 6-level input'
CALL wrf_message ( message )
ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) ) )
ELSE
write(message, FMT='(A)') ' Assume Noah LSM input'
CALL wrf_message ( message )
ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input,num_sw_levels_input) +2) )
END IF
! Sort the levels for temperature.
!print*,'num_st_levels_input, st_levels_input', num_st_levels_input, st_levels_input
!print*,'num_sm_levels_input,num_sw_levels_input',num_sm_levels_input,num_sw_levels_input
outert : DO lout = 1 , num_st_levels_input-1
innert : DO lin = lout+1 , num_st_levels_input
IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN
temp = st_levels_input(lout)
st_levels_input(lout) = st_levels_input(lin)
st_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = st_input(i,lout+1,j)
st_input(i,lout+1,j) = st_input(i,lin+1,j)
st_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innert
END DO outert
!tgs add IF
IF ( flag_soilt000 .NE. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
st_input(i,1,j) = tsk(i,j)
st_input(i,num_st_levels_input+2,j) = tmn(i,j)
END DO
END DO
ENDIF
#if ( NMM_CORE == 1 )
!new
! write(0,*) 'st_input(1) in init_soil_2_real'
! DO J=MIN(jde-1,jte),JTS, -MIN(jde-1,jte)/15
! write(0,616) (st_input(I,1,J),I=its , MIN(ide-1,ite),MIN(ide-1,ite)/10)
! ENDDO
! write(0,*) 'st_input(2) in init_soil_2_real'
! DO J=MIN(jde-1,jte),JTS, -MIN(jde-1,jte)/15
! write(0,616) (st_input(I,2,J),I=its , MIN(ide-1,ite),MIN(ide-1,ite)/10)
! ENDDO
616 format(20(f4.0,1x))
#endif
! Sort the levels for moisture.
outerm: DO lout = 1 , num_sm_levels_input-1
innerm : DO lin = lout+1 , num_sm_levels_input
IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN
temp = sm_levels_input(lout)
sm_levels_input(lout) = sm_levels_input(lin)
sm_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sm_input(i,lout+1,j)
sm_input(i,lout+1,j) = sm_input(i,lin+1,j)
sm_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innerm
END DO outerm
!tgs add IF
IF ( flag_soilm000 .NE. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sm_input(i,1,j) = sm_input(i,2,j)
sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j)
END DO
END DO
ENDIF
! Sort the levels for liquid moisture.
outerw: DO lout = 1 , num_sw_levels_input-1
innerw : DO lin = lout+1 , num_sw_levels_input
IF ( sw_levels_input(lout) .GT. sw_levels_input(lin) ) THEN
temp = sw_levels_input(lout)
sw_levels_input(lout) = sw_levels_input(lin)
sw_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sw_input(i,lout+1,j)
sw_input(i,lout+1,j) = sw_input(i,lin+1,j)
sw_input(i,lin+1,j) = temp
END DO
END DO
END IF
END DO innerw
END DO outerw
IF ( num_sw_levels_input .GT. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sw_input(i,1,j) = sw_input(i,2,j)
sw_input(i,num_sw_levels_input+2,j) = sw_input(i,num_sw_levels_input+1,j)
END DO
END DO
END IF
found_levels = .TRUE.
ELSE IF ( ( num .LE. 0 ) .AND. ( start_date .NE. current_date ) ) THEN
found_levels = .FALSE.
ELSE
CALL wrf_error_fatal ( &
'No input soil level data (temperature, moisture or liquid, or all are missing). Required for LSM.' )
END IF
! Is it OK to continue?
IF ( found_levels ) THEN
!tgs add IF
IF ( flag_soilt000 .NE.1) THEN
!tgs initialize from Noah data
! Here are the levels that we have from the input for temperature. The input levels plus
! two more: the skin temperature at 0 cm, and the annual mean temperature at 300 cm.
zhave(1) = 0.
DO l = 1 , num_st_levels_input
zhave(l+1) = st_levels_input(l) / 100.
END DO
zhave(num_st_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt : DO lwant = 1 , num_soil_layers
z_havet : DO lhave = 1 , num_st_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet
END IF
END DO z_havet
END DO z_wantt
ELSE
!tgs initialize from RUCLSM data
DO l = 1 , num_st_levels_input
zhave(l) = st_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt_2 : DO lwant = 1 , num_soil_layers
z_havet_2 : DO lhave = 1 , num_st_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet_2
END IF
END DO z_havet_2
END DO z_wantt_2
ENDIF
IF ( flag_soilm000 .NE. 1 ) THEN
!tgs initialize from Noah
! Here are the levels that we have from the input for moisture. The input levels plus
! two more: a value at 0 cm and one at 300 cm. The 0 cm value is taken to be identical
! to the most shallow layer's value. Similarly, the 300 cm value is taken to be the same
! as the most deep layer's value.
zhave(1) = 0.
DO l = 1 , num_sm_levels_input
zhave(l+1) = sm_levels_input(l) / 100.
END DO
zhave(num_sm_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantm : DO lwant = 1 , num_soil_layers
z_havem : DO lhave = 1 , num_sm_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem
END IF
END DO z_havem
END DO z_wantm
ELSE
!tgs initialize from RUCLSM data
DO l = 1 , num_sm_levels_input
zhave(l) = sm_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantm_2 : DO lwant = 1 , num_soil_layers
z_havem_2 : DO lhave = 1 , num_sm_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem_2
END IF
END DO z_havem_2
END DO z_wantm_2
ENDIF
! Any liquid soil moisture to worry about?
IF ( num_sw_levels_input .GT. 1 ) THEN
zhave(1) = 0.
DO l = 1 , num_sw_levels_input
zhave(l+1) = sw_levels_input(l) / 100.
END DO
zhave(num_sw_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantw : DO lwant = 1 , num_soil_layers
z_havew : DO lhave = 1 , num_sw_levels_input +2 -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sh2o(i,lwant,j)= ( sw_input(i,lhave ,j) * ( zhave(lhave+1) - zs (lwant) ) + &
sw_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havew
END IF
END DO z_havew
END DO z_wantw
END IF
! Over water, put in reasonable values for soil temperature and moisture. These won't be
! used, but they will make a more continuous plot.
IF ( flag_sst .EQ. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= sst(i,j)
!tgs add line for tsk
tsk(i,j) = sst(i,j)
smois(i,l,j)= 1.0
sh2o (i,l,j)= 1.0
END DO
END IF
END DO
END DO
ELSE
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= tsk(i,j)
smois(i,l,j)= 1.0
sh2o (i,l,j)= 1.0
END DO
END IF
END DO
END DO
END IF
DEALLOCATE (zhave)
END IF
END SUBROUTINE init_soil_2_real
SUBROUTINE init_soil_2_ideal (docs) ( xland,xice,vegfra,snow,canwat, & 2
ivgtyp,isltyp,tslb,smois,tmn, &
num_soil_layers, &
ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte )
IMPLICIT NONE
INTEGER, INTENT(IN) ::ids,ide, jds,jde, kds,kde, &
ims,ime, jms,jme, kms,kme, &
its,ite, jts,jte, kts,kte
INTEGER, INTENT(IN) ::num_soil_layers
REAL, DIMENSION( ims:ime, num_soil_layers, jms:jme ) , INTENT(OUT) :: smois, tslb
REAL, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: xland, snow, canwat, xice, vegfra, tmn
INTEGER, DIMENSION( ims:ime, jms:jme ) , INTENT(OUT) :: ivgtyp, isltyp
INTEGER :: icm,jcm,itf,jtf
INTEGER :: i,j,l
itf=min0(ite,ide-1)
jtf=min0(jte,jde-1)
icm = ide/2
jcm = jde/2
DO j=jts,jtf
DO l=1,num_soil_layers
DO i=its,itf
smois(i,1,j)=0.10
smois(i,2,j)=0.10
smois(i,3,j)=0.10
smois(i,4,j)=0.10
tslb(i,1,j)=295.
tslb(i,2,j)=297.
tslb(i,3,j)=293.
tslb(i,4,j)=293.
ENDDO
ENDDO
ENDDO
DO j=jts,jtf
DO i=its,itf
xland(i,j) = 2
tmn(i,j) = 294.
xice(i,j) = 0.
vegfra(i,j) = 0.
snow(i,j) = 0.
canwat(i,j) = 0.
ivgtyp(i,j) = 7
isltyp(i,j) = 8
ENDDO
ENDDO
END SUBROUTINE init_soil_2_ideal
SUBROUTINE init_soil_3_real (docs) ( tsk , tmn , smois , tslb , & 2,4
st_input , sm_input , landmask, sst, &
zs , dzs , &
st_levels_input , sm_levels_input , &
num_soil_layers , num_st_levels_input , num_sm_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , &
flag_sst , flag_soilt000 , flag_soilm000 , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte )
IMPLICIT NONE
INTEGER , INTENT(IN) :: num_soil_layers , &
num_st_levels_input , num_sm_levels_input , &
num_st_levels_alloc , num_sm_levels_alloc , &
ids , ide , jds , jde , kds , kde , &
ims , ime , jms , jme , kms , kme , &
its , ite , jts , jte , kts , kte
INTEGER , INTENT(IN) :: flag_sst, flag_soilt000, flag_soilm000
INTEGER , DIMENSION(1:num_st_levels_input) , INTENT(INOUT) :: st_levels_input
INTEGER , DIMENSION(1:num_sm_levels_input) , INTENT(INOUT) :: sm_levels_input
REAL , DIMENSION(ims:ime,1:num_st_levels_alloc,jms:jme) , INTENT(INOUT) :: st_input
REAL , DIMENSION(ims:ime,1:num_sm_levels_alloc,jms:jme) , INTENT(INOUT) :: sm_input
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: landmask , sst
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(IN) :: tmn
REAL , DIMENSION(ims:ime,jms:jme) , INTENT(INOUT) :: tsk
REAL , DIMENSION(num_soil_layers) :: zs , dzs
REAL , DIMENSION(ims:ime,num_soil_layers,jms:jme) , INTENT(OUT) :: tslb , smois
REAL , ALLOCATABLE , DIMENSION(:) :: zhave
INTEGER :: i , j , l , lout , lin , lwant , lhave
REAL :: temp
! Allocate the soil layer array used for interpolating.
IF ( ( num_st_levels_input .LE. 0 ) .OR. &
( num_sm_levels_input .LE. 0 ) ) THEN
PRINT '(A)','No input soil level data (either temperature or moisture, or both are missing). Required for RUC LSM.'
CALL wrf_error_fatal ( 'no soil data' )
ELSE
IF ( flag_soilt000 .eq. 1 ) THEN
PRINT '(A)',' Assume RUC LSM 6-level input'
ALLOCATE ( zhave( MAX(num_st_levels_input,num_sm_levels_input) ) )
ELSE
PRINT '(A)',' Assume non-RUC LSM input'
ALLOCATE ( zhave( MAX(num_st_levels_input,num_soil_layers) ) )
END IF
END IF
! Sort the levels for temperature.
outert : DO lout = 1 , num_st_levels_input-1
innert : DO lin = lout+1 , num_st_levels_input
IF ( st_levels_input(lout) .GT. st_levels_input(lin) ) THEN
temp = st_levels_input(lout)
st_levels_input(lout) = st_levels_input(lin)
st_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = st_input(i,lout,j)
st_input(i,lout,j) = st_input(i,lin,j)
st_input(i,lin,j) = temp
END DO
END DO
END IF
END DO innert
END DO outert
IF ( flag_soilt000 .NE. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
st_input(i,1,j) = tsk(i,j)
st_input(i,num_st_levels_input+2,j) = tmn(i,j)
END DO
END DO
END IF
! Sort the levels for moisture.
outerm: DO lout = 1 , num_sm_levels_input-1
innerm : DO lin = lout+1 , num_sm_levels_input
IF ( sm_levels_input(lout) .GT. sm_levels_input(lin) ) THEN
temp = sm_levels_input(lout)
sm_levels_input(lout) = sm_levels_input(lin)
sm_levels_input(lin) = NINT(temp)
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
temp = sm_input(i,lout,j)
sm_input(i,lout,j) = sm_input(i,lin,j)
sm_input(i,lin,j) = temp
END DO
END DO
END IF
END DO innerm
END DO outerm
IF ( flag_soilm000 .NE. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
sm_input(i,1,j) = sm_input(i,2,j)
sm_input(i,num_sm_levels_input+2,j) = sm_input(i,num_sm_levels_input+1,j)
END DO
END DO
END IF
! Here are the levels that we have from the input for temperature.
IF ( flag_soilt000 .EQ. 1 ) THEN
DO l = 1 , num_st_levels_input
zhave(l) = st_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt : DO lwant = 1 , num_soil_layers
z_havet : DO lhave = 1 , num_st_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet
END IF
END DO z_havet
END DO z_wantt
ELSE
zhave(1) = 0.
DO l = 1 , num_st_levels_input
zhave(l+1) = st_levels_input(l) / 100.
END DO
zhave(num_st_levels_input+2) = 300. / 100.
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantt_2 : DO lwant = 1 , num_soil_layers
z_havet_2 : DO lhave = 1 , num_st_levels_input +2
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
tslb(i,lwant,j)= ( st_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
st_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havet_2
END IF
END DO z_havet_2
END DO z_wantt_2
END IF
! Here are the levels that we have from the input for moisture.
IF ( flag_soilm000 .EQ. 1 ) THEN
DO l = 1 , num_sm_levels_input
zhave(l) = sm_levels_input(l) / 100.
END DO
! Interpolate between the layers we have (zhave) and those that we want (zs).
z_wantm : DO lwant = 1 , num_soil_layers
z_havem : DO lhave = 1 , num_sm_levels_input -1
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem
END IF
END DO z_havem
END DO z_wantm
ELSE
zhave(1) = 0.
DO l = 1 , num_sm_levels_input
zhave(l+1) = sm_levels_input(l) / 100.
END DO
zhave(num_sm_levels_input+2) = 300. / 100.
z_wantm_2 : DO lwant = 1 , num_soil_layers
z_havem_2 : DO lhave = 1 , num_sm_levels_input +2
IF ( ( zs(lwant) .GE. zhave(lhave ) ) .AND. &
( zs(lwant) .LE. zhave(lhave+1) ) ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
smois(i,lwant,j)= ( sm_input(i,lhave,j ) * ( zhave(lhave+1) - zs (lwant) ) + &
sm_input(i,lhave+1,j) * ( zs (lwant ) - zhave(lhave) ) ) / &
( zhave(lhave+1) - zhave(lhave) )
END DO
END DO
EXIT z_havem_2
END IF
END DO z_havem_2
END DO z_wantm_2
END IF
! Over water, put in reasonable values for soil temperature and moisture. These won't be
! used, but they will make a more continuous plot.
IF ( flag_sst .EQ. 1 ) THEN
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j) = sst(i,j)
tsk(i,j) = sst(i,j)
smois(i,l,j)= 1.0
END DO
END IF
END DO
END DO
ELSE
DO j = jts , MIN(jde-1,jte)
DO i = its , MIN(ide-1,ite)
IF ( landmask(i,j) .LT. 0.5 ) THEN
DO l = 1 , num_soil_layers
tslb(i,l,j)= tsk(i,j)
smois(i,l,j)= 1.0
END DO
END IF
END DO
END DO
END IF
DEALLOCATE (zhave)
END SUBROUTINE init_soil_3_real
END MODULE module_soil_pre
#endif