<HTML> <BODY BGCOLOR=#ccccdd LINK=#0000aa VLINK=#0000ff ALINK=#ff0000 ><BASE TARGET="bottom_target"><PRE>
<A NAME='UFBINT'><A href='../../html_code/bufr/ufbint.f.html#UFBINT' TARGET='top_target'><IMG SRC="../../gif/bar_red.gif" border=0></A>
SUBROUTINE UFBINT(LUNIN,USR,I1,I2,IRET,STR) 55,48
C$$$ SUBPROGRAM DOCUMENTATION BLOCK
C
C SUBPROGRAM: UFBINT
C PRGMMR: WOOLLEN ORG: NP20 DATE: 1994-01-06
C
C ABSTRACT: THIS SUBROUTINE WRITES OR READS SPECIFIED VALUES TO OR FROM
C THE CURRENT BUFR DATA SUBSET WITHIN INTERNAL ARRAYS, WITH THE
C DIRECTION OF THE DATA TRANSFER DETERMINED BY THE CONTEXT OF
C ABS(LUNIN) (I.E., IF ABS(LUNIN) POINTS TO A BUFR FILE THAT IS OPEN
C FOR INPUT, THEN DATA VALUES ARE READ FROM THE INTERNAL DATA SUBSET;
C OTHERWISE, DATA VALUES ARE WRITTEN TO THE INTERNAL DATA SUBSET).
C THE DATA VALUES CORRESPOND TO MNEMONICS WHICH ARE PART OF A
C DELAYED-REPLICATION SEQUENCE, OR FOR WHICH THERE IS NO REPLICATION
C AT ALL. IF UFBINT IS READING VALUES, THEN EITHER BUFR ARCHIVE
C LIBRARY SUBROUTINE READSB OR READNS MUST HAVE BEEN PREVIOUSLY
C CALLED TO READ THE SUBSET FROM UNIT ABS(LUNIN) INTO
C INTERNAL MEMORY. IF IT IS WRITING VALUES, THEN EITHER BUFR ARCHIVE
C LIBRARY SUBROUTINE OPENMG OR OPENMB MUST HAVE BEEN PREVIOUSLY
C CALLED TO OPEN AND INITIALIZE A BUFR MESSAGE WITHIN MEMORY FOR THIS
C ABS(LUNIN).
C
C PROGRAM HISTORY LOG:
C 1994-01-06 J. WOOLLEN -- ORIGINAL AUTHOR
C 1996-11-25 J. WOOLLEN -- MODIFIED TO ADD A RETURN CODE WHEN
C MNEMONICS ARE NOT FOUND WHEN READING
C 1996-12-11 J. WOOLLEN -- REMOVED A HARD ABORT FOR USERS WHO TRY TO
C WRITE NON-EXISTING MNEMONICS
C 1996-12-17 J. WOOLLEN -- MODIFIED TO ALWAYS INITIALIZE "USR" ARRAY
C TO MISSING (10E10) WHEN BUFR FILE IS BEING
C READ
C 1998-07-08 J. WOOLLEN -- REPLACED CALL TO CRAY LIBRARY ROUTINE
C "ABORT" WITH CALL TO NEW INTERNAL BUFRLIB
C ROUTINE "BORT"; IMPROVED MACHINE
C PORTABILITY
C 1999-11-18 J. WOOLLEN -- THE NUMBER OF BUFR FILES WHICH CAN BE
C OPENED AT ONE TIME INCREASED FROM 10 TO 32
C (NECESSARY IN ORDER TO PROCESS MULTIPLE
C BUFR FILES UNDER THE MPI)
C 2002-05-14 J. WOOLLEN -- REMOVED OLD CRAY COMPILER DIRECTIVES
C 2003-11-04 S. BENDER -- ADDED REMARKS/BUFRLIB ROUTINE
C INTERDEPENDENCIES
C 2003-11-04 D. KEYSER -- MAXJL (MAXIMUM NUMBER OF JUMP/LINK ENTRIES)
C INCREASED FROM 15000 TO 16000 (WAS IN
C VERIFICATION VERSION); UNIFIED/PORTABLE FOR
C WRF; ADDED DOCUMENTATION (INCLUDING
C HISTORY); OUTPUTS MORE COMPLETE DIAGNOSTIC
C INFO WHEN ROUTINE TERMINATES ABNORMALLY OR
C UNUSUAL THINGS HAPPEN; CHANGED CALL FROM
C BORT TO BORT2 IN SOME CASES
C 2004-08-18 J. ATOR -- ADDED SAVE FOR IFIRST1 AND IFIRST2 FLAGS
C 2009-04-21 J. ATOR -- USE ERRWRT
C
C USAGE: CALL UFBINT (LUNIN, USR, I1, I2, IRET, STR)
C INPUT ARGUMENT LIST:
C LUNIN - INTEGER: ABSOLUTE VALUE IS FORTRAN LOGICAL UNIT NUMBER
C FOR BUFR FILE
C - IF BUFR FILE OPEN FOR OUTPUT AND LUNIN IS LESS
C THAN ZERO, UFBINT TREATS THE BUFR FILE AS THOUGH
C IT WERE OPEN FOR INPUT
C USR - ONLY IF BUFR FILE OPEN FOR OUTPUT:
C REAL*8: (I1,I2) STARTING ADDRESS OF DATA VALUES
C WRITTEN TO DATA SUBSET
C I1 - INTEGER: LENGTH OF FIRST DIMENSION OF USR OR THE
C NUMBER OF BLANK-SEPARATED MNEMONICS IN STR (FORMER
C MUST BE AT LEAST AS LARGE AS LATTER)
C I2 - INTEGER:
C - IF BUFR FILE OPEN FOR INPUT: LENGTH OF SECOND
C DIMENSION OF USR
C - IF BUFR FILE OPEN FOR OUTPUT: NUMBER OF "LEVELS"
C OF DATA VALUES TO BE WRITTEN TO DATA SUBSET
C STR - CHARACTER*(*): STRING OF BLANK-SEPARATED TABLE B
C MNEMONICS IN ONE-TO-ONE CORRESPONDENCE WITH FIRST
C DIMENSION OF USR
C - IF BUFR FILE OPEN FOR INPUT: THIS CAN ALSO BE A
C SINGLE TABLE D (SEQUENCE) MNEMONIC WITH EITHER 8-
C OR 16-BIT DELAYED REPLICATION (SEE REMARKS 1)
C - IF BUFR FILE OPEN FOR INPUT: THERE ARE THREE
C "GENERIC" MNEMONICS NOT RELATED TO TABLE B OR D,
C THESE RETURN THE FOLLOWING INFORMATION IN
C CORRESPONDING USR LOCATION:
C 'NUL' WHICH ALWAYS RETURNS BMISS ("MISSING")
C 'IREC' WHICH ALWAYS RETURNS THE CURRENT BUFR
C MESSAGE (RECORD) NUMBER IN WHICH THIS
C SUBSET RESIDES
C 'ISUB' WHICH ALWAYS RETURNS THE CURRENT SUBSET
C NUMBER OF THIS SUBSET WITHIN THE BUFR
C MESSAGE (RECORD) NUMBER 'IREC'
C
C OUTPUT ARGUMENT LIST:
C USR - ONLY IF BUFR FILE OPEN FOR INPUT:
C REAL*8: (I1,I2) STARTING ADDRESS OF DATA VALUES
C READ FROM DATA SUBSET
C IRET - INTEGER:
C - IF BUFR FILE OPEN FOR INPUT: NUMBER OF "LEVELS" OF
C DATA VALUES READ FROM DATA SUBSET (MUST BE NO
C LARGER THAN I2)
C - IF BUFR FILE OPEN FOR OUTPUT: NUMBER OF "LEVELS"
C OF DATA VALUES WRITTEN TO DATA SUBSET (SHOULD BE
C SAME AS I2)
C
C REMARKS:
C 1) UFBINT CAN ALSO BE CALLED TO PROVIDE INFORMATION ABOUT A SINGLE
C TABLE D (SEQUENCE) MNEMONIC WITH EITHER 8- OR 16-BIT DELAYED
C REPLICATION IN A SUBSET WHEN THE BUFR FILE IS OPEN FOR INPUT.
C THE MNEMONIC IN STR MUST APPEAR AS IT DOES IN THE BUFR TABLE,
C I.E., BRACKETED BY "{" AND "}" OR "[" AND "]" FOR 8-BIT DELAYED
C REPLICATION, OR BRACKETED BY "(" AND ")" FOR 16-BIT DELAYED
C REPLICATION. {NOTE: THIS WILL NOT WORK FOR SEQUENCES WITH
C 1-BIT DELAYED REPLICATION (BRACKETED BY "<" AND ">"), STANDARD
C REPLICATION (BRACKETED BY "'s), OR NO REPLICATION (NO
C BRACKETING SYMBOLS).}
C
C FOR EXAMPLE:
C
C CALL UFBINT(LUNIN,PLEVL,1, 50,IRET,'{PLEVL}')
C
C WILL RETURN WITH IRET EQUAL TO THE NUMBER OF OCCURRENCES OF THE
C 8-BIT DELAYED REPLICATION SEQUENCE PLEVL IN THE SUBSET AND WITH
C (PLEVL(I),I=1,IRET) EQUAL TO THE NUMBER OF REPLICATIONS IN EACH
C OCCURRENCE OF PLEVL IN THE SUBSET. IF THERE ARE NO OCCURRENCES
C OF PLEVL IN THE SUBSET, IRET IS RETURNED AS ZERO.
C
C 2) WHEN THE BUFR FILE IS OPEN FOR OUTPUT, UFBINT CAN BE USED TO
C PRE-ALLOCATE SPACE FOR SOME OR ALL MNEMONICS WITHIN DELAYED
C REPLICATION SEQUENCES. A SUBSEQUENT CALL TO BUFR ARCHIVE
C LIBRARY ROUTINE UFBREP OR UFBSEQ THEN ACTUALLY STORES THE
C VALUES INTO THE BUFR FILES. HERE ARE TWO EXAMPLES OF THIS:
C
C EXAMPLE 1) PROBLEM: AN OUTPUT SUBSET "SEQNCE" IS LAID OUT AS
C FOLLOWS IN A BUFR TABLE (NOTE 16 CHARACTERS HAVE BEEN
C REMOVED FROM THE LAST COLUMN TO ALLOW THE TABLE TO FIT IN
C THIS DOCBLOCK):
C
C | SEQNCE | {PLEVL} |
C | PLEVL | WSPD WDIR TSIG PRLC TSIG PRLC TSIG PRLC |
C
C -- OR --
C
C | SEQNCE | {PLEVL} |
C | PLEVL | WSPD WDIR "PSEQ"3 |
C | PSEQ | TSIG PRLC |
C
C IN THIS CASE THE APPLICATION PROGRAM MUST STORE VALUES WHICH
C HAVE STANDARD REPLICATION NESTED INSIDE OF A DELAYED
C REPLICATION SEQUENCE. FOR EXAMPLE, ASSUME 50 LEVELS OF WIND
C SPEED, WIND DIRECTION, OBSERVED PRESSURE, FIRST GUESS
c PRESSURE AND ANALYZED PRESSURE ARE TO BE WRITTEN TO "SEQNCE".
C
C THE FOLLOWING LOGIC WOULD ENCODE VALUES PROPERLY:
C.....................................................................
C ....
C REAL*8 DROBS(2,50)
C REAL*8 SROBS(2,150)
C ....
C DO I=1,50
C DROBS(1,I) = Value of wind speed on level "I"
C DROBS(2,I) = Value of wind direction on level "I"
C SROBS(1,I*3-2) = Value of observed pressure on level "I"
C SROBS(2,I*3-2) = 25. ! Value in Code Table 0-08-021 (TSIG)
C ! for time sigificance (Nominal
C ! reporting time) for observed
C ! pressure on level "I"
C SROBS(1,I*3-1) = Value of first guess pressure on level "I"
C SROBS(2,I*3-1) = 27. ! Value in Code Table 0-08-021 (TSIG)
C ! for time sigificance (First guess)
C ! for first guess pressure on level "I"
C SROBS(1,I*3) = Value of analyzed pressure on level "I"
C SROBS(2,I*3) = 16. ! Value in Code Table 0-08-021 (TSIG)
C ! for time sigificance (Analysis) for
C ! analyzed pressure on level "I"
C ENDDO
C
C ! The call to UFBINT here will not only store the 50
C ! values of WSPD and WDIR into the BUFR subset, it
C ! will also allocate the space to store three
C ! replications of TSIG and PRLC on each of the 50
C ! delayed-replication "levels"
C CALL UFBINT(LUNIN,DROBS,2, 50,IRET,'WSPD WDIR')
C
C ! The call to UFBREP here will actually store the 150
C ! values of both TSIG and PRLC (three values for each
C ! on 50 delayed-replication "levels")
C CALL UFBREP(LUNIN,SROBS,2,150,IRET,'TSIG PRLC')
C ....
C STOP
C END
C.....................................................................
C
C A SIMILAR EXAMPLE COULD BE PROVIDED FOR READING VALUES WHICH
C HAVE STANDARD REPLICATION NESTED WITHIN DELAYED REPLICATION,
C FROM BUFR FILES OPEN FOR INPUT. (NOT SHOWN HERE.)
C
C
C EXAMPLE 2) PROBLEM: AN INPUT SUBSET, "REPT_IN", AND AN OUTPUT
C SUBSET "REPT_OUT", ARE LAID OUT AS FOLLOWS IN A BUFR TABLE
C (NOTE 16 CHARACTERS HAVE BEEN REMOVED FROM THE LAST COLUMN
C TO ALLOW THE TABLE TO FIT IN THIS DOCBLOCK):
C
C | REPT_IN | YEAR MNTH DAYS HOUR MINU {PLEVL} CLAT CLON |
C | REPT_OUT | YEAR DOYR HOUR MINU {PLEVL} CLAT CLON |
C | PLEVL | PRLC TMBD REHU WDIR WSPD
C
C IN THIS CASE THE APPLICATION PROGRAM IS READING IN VALUES
C FROM A BUFR FILE CONTAINING SUBSET "REPT_IN", CONVERTING
C MONTH AND DAY TO DAY OF YEAR, AND THEN WRITING VALUES TO
C SUBSET "REPT_OUT" IN ANOTHER BUFR FILE. A CONVENIENT WAY TO
C DO THIS IS TO CALL UFBSEQ TO READ IN AND WRITE OUT THE
C VALUES, HOWEVER THIS IS COMPLICATED BY THE PRESENCE OF THE
C DELAYED-RELICATION SEQUENCE "PLEVL" BECAUSE THE OUTPUT CALL
C TO UFBSEQ DOES NOT KNOW A-PRIORI HOW MANY REPLICATIONS ARE
C NEEDED TO STORE THE CONTENTS OF "PLEVL" (IT SETS THE NUMBER
C TO ZERO BY DEFUALT). A CALL TO UFBINT IS FIRST NEEDED TO
C ALLOCATE THE SPACE AND DETERMINE THE NUMBER OF LEVELS NEEDED
C TO STORE ALL VALUES IN "PLEVL".
C
C THE FOLLOWING LOGIC WOULD PEFORM THE READ/WRITE PROPERLY:
C.....................................................................
C ....
C REAL*8 OBSI(2000),OBSO(1999),PLEVL(5,255),REPS_8
C CHARACTER*8 SUBSET
C ....
C
C CALL DATELEN(10)
C
C ! Open input BUFR file in LUBFI and open output BUFR file in
C ! LUBFJ, both use the BUFR table in LINDX
C CALL OPENBF(LUBFI,'IN', LINDX)
C CALL OPENBF(LUBFJ,'OUT',LINDX)
C
C ! Read through the BUFR messages in the input file
C DO WHILE(IREADMG(LUBFI,SUBSET,IDATE).GE.0)
C
C ! Open message (for writing) in output file
C CALL OPENMB(LUBFJ,'REPT_OUT',IDATE)
C
C ! Read through the subsets in this input BUFR messages
C DO WHILE(IREADSB(LUBFI).EQ.0)
C
C ! This call to UFBSEQ will read in the entire contents
C ! of subset "REPT_IN", storing them into array OBSI
C ! (Note: On input, UFBSEQ knows how many replications
C of "PLEV" are present)
C CALL UFBSEQ(LUBFI,OBSI,2000,1,IRET,'REPT_IN')
C
C ! This call to UFBINT will return the number of
C ! replications ("levels") in "PLEVL" for subset
C ! "REPT_IN"" ! {see 1) above in REMARKS}
C CALL UFBINT(LUBFI,REPS_8,1,1,IRET,'{PLEVL}')
C IREPS = REPS_8
C
C IYR = OBSI(1)
C IMO = OBSI(2)
C IDA = OBSI(3)
C CALL xxxx(IYR, IMO, IDA, JDY) ! convert month and day
C ! to day of year (JDY)
C OBSO(1) = OBSI(1)
C OBSO(2) = JDY
C DO I = 3,1999
C OBSO(I) = OBSI(1+1)
C ENDDO
C
C PLEVL = GETBMISS()
C
C ! The call to UFBINT here will allocate the space to
C ! later allow UFBSEQ to store IREPS replications of
C ! "PLEVL" into the output BUFR subset "REPT_OUT" (note
C ! here it is simply storing missing values)
C CALL UFBINT(LUBFJ,PLEVL,5,IREPS,IRET,
C $ 'PRLC TMBD REHU WDIR WSPD')
C
C ! The call to UFBSEQ here will write out the entire
C ! contents of subset "REPT_OUT", reading them from
C ! array OBSO
C CALL UFBSEQ(LUBFJ,OBSO,1999,1,IRET,'REPT_OUT')
C
C ! Write the subset into the output BUFR message
C CALL WRITSB(LUBFJ)
C ENDDO
C
C ! All done
C
C STOP
C END
C.....................................................................
C
C
C THIS ROUTINE CALLS: BORT BORT2 ERRWRT STATUS
C STRING TRYBUMP UFBRW
C THIS ROUTINE IS CALLED BY: UFBINX UFBRMS
C Also called by application programs.
C
C ATTRIBUTES:
C LANGUAGE: FORTRAN 77
C MACHINE: PORTABLE TO ALL PLATFORMS
C
C$$$
INCLUDE 'bufrlib.prm'
COMMON /MSGCWD/ NMSG(NFILES),NSUB(NFILES),MSUB(NFILES),
. INODE(NFILES),IDATE(NFILES)
COMMON /USRSTR/ NNOD,NCON,NODS(20),NODC(10),IVLS(10),KONS(10)
COMMON /USRINT/ NVAL(NFILES),INV(MAXSS,NFILES),VAL(MAXSS,NFILES)
COMMON /QUIET / IPRT
CHARACTER*(*) STR
CHARACTER*128 BORT_STR1,BORT_STR2,ERRSTR
REAL*8 USR(I1,I2),VAL
DATA IFIRST1/0/,IFIRST2/0/
SAVE IFIRST1, IFIRST2
C----------------------------------------------------------------------
C----------------------------------------------------------------------
IRET = 0
C CHECK THE FILE STATUS AND I-NODE
C --------------------------------
LUNIT = ABS(LUNIN)
CALL STATUS(LUNIT,LUN,IL,IM)
IF(IL.EQ.0) GOTO 900
IF(IM.EQ.0) GOTO 901
IF(INODE(LUN).NE.INV(1,LUN)) GOTO 902
IO = MIN(MAX(0,IL),1)
IF(LUNIT.NE.LUNIN) IO = 0
IF(I1.LE.0) THEN
IF(IPRT.GE.0) THEN
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
ERRSTR = 'BUFRLIB: UFBINT - 3rd ARG. (INPUT) IS .LE. 0, ' //
. 'SO RETURN WITH 5th ARG. (IRET) = 0; 6th ARG. (STR) ='
CALL ERRWRT(ERRSTR)
CALL ERRWRT(STR)
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
CALL ERRWRT(' ')
ENDIF
GOTO 100
ELSEIF(I2.LE.0) THEN
IF(IPRT.EQ.-1) IFIRST1 = 1
IF(IO.EQ.0 .OR. IFIRST1.EQ.0 .OR. IPRT.GE.1) THEN
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
ERRSTR = 'BUFRLIB: UFBINT - 4th ARG. (INPUT) IS .LE. 0, ' //
. 'SO RETURN WITH 5th ARG. (IRET) = 0; 6th ARG. (STR) ='
CALL ERRWRT(ERRSTR)
CALL ERRWRT(STR)
IF(IPRT.EQ.0 .AND. IO.EQ.1) THEN
ERRSTR = 'Note: Only the first occurrence of this WARNING ' //
. 'message is printed, there may be more. To output all ' //
. 'such messages,'
CALL ERRWRT(ERRSTR)
ERRSTR = 'modify your application program to add ' //
. '"CALL OPENBF(0,''QUIET'',1)" prior to the first call ' //
. 'to a BUFRLIB routine.'
CALL ERRWRT(ERRSTR)
ENDIF
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
CALL ERRWRT(' ')
IFIRST1 = 1
ENDIF
GOTO 100
ENDIF
C PARSE OR RECALL THE INPUT STRING
C --------------------------------
CALL STRING(STR,LUN,I1,IO)
C INITIALIZE USR ARRAY PRECEEDING AN INPUT OPERATION
C --------------------------------------------------
IF(IO.EQ.0) THEN
DO J=1,I2
DO I=1,I1
USR(I,J) = BMISS
ENDDO
ENDDO
ENDIF
C CALL THE MNEMONIC READER/WRITER
C -------------------------------
CALL UFBRW(LUN,USR,I1,I2,IO,IRET)
C IF INCOMPLETE WRITE TRY TO INITIALIZE REPLICATION SEQUENCE OR RETURN
C ---------------------------------------------------------------------
IF(IO.EQ.1 .AND. IRET.NE.I2 .AND. IRET.GE.0) THEN
CALL TRYBUMP(LUNIT,LUN,USR,I1,I2,IO,IRET)
IF(IRET.NE.I2) GOTO 903
ELSEIF(IRET.EQ.-1) THEN
IRET = 0
ENDIF
IF(IRET.EQ.0) THEN
IF(IO.EQ.0) THEN
IF(IPRT.GE.1) THEN
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
ERRSTR = 'BUFRLIB: UFBINT - NO SPECIFIED VALUES READ IN, ' //
. 'SO RETURN WITH 5th ARG. (IRET) = 0; 6th ARG. (STR) ='
CALL ERRWRT(ERRSTR)
CALL ERRWRT(STR)
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
CALL ERRWRT(' ')
ENDIF
ELSE
IF(IPRT.EQ.-1) IFIRST2 = 1
IF(IFIRST2.EQ.0 .OR. IPRT.GE.1) THEN
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
ERRSTR = 'BUFRLIB: UFBINT - NO SPECIFIED VALUES WRITTEN OUT, ' //
. 'SO RETURN WITH 5th ARG. (IRET) = 0; 6th ARG. (STR) ='
CALL ERRWRT(ERRSTR)
CALL ERRWRT(STR)
CALL ERRWRT('MAY NOT BE IN THE BUFR TABLE(?)')
IF(IPRT.EQ.0) THEN
ERRSTR = 'Note: Only the first occurrence of this WARNING ' //
. 'message is printed, there may be more. To output all ' //
. 'such messages,'
CALL ERRWRT(ERRSTR)
ERRSTR = 'modify your application program to add ' //
. '"CALL OPENBF(0,''QUIET'',1)" prior to the first call ' //
. 'to a BUFRLIB routine.'
CALL ERRWRT(ERRSTR)
ENDIF
CALL ERRWRT('+++++++++++++++++++++WARNING+++++++++++++++++++++++')
CALL ERRWRT(' ')
IFIRST2 = 1
ENDIF
ENDIF
ENDIF
C EXITS
C -----
100 RETURN
900 CALL BORT('BUFRLIB: UFBINT - BUFR FILE IS CLOSED, IT MUST BE'//
. ' OPEN')
901 CALL BORT('BUFRLIB: UFBINT - A MESSAGE MUST BE OPEN IN BUFR '//
. 'FILE, NONE ARE')
902 CALL BORT('BUFRLIB: UFBINT - LOCATION OF INTERNAL TABLE FOR '//
. 'BUFR FILE DOES NOT AGREE WITH EXPECTED LOCATION IN INTERNAL '//
. 'SUBSET ARRAY')
903 WRITE(BORT_STR1,'("BUFRLIB: UFBINT - MNEMONIC STRING READ IN IS'//
. ': ",A)') STR
WRITE(BORT_STR2,'(18X,"THE NUMBER OF ''LEVELS'' ACTUALLY '//
. 'WRITTEN (",I3,") DOES NOT EQUAL THE NUMBER REQUESTED (",I3,")'//
. ' - INCOMPLETE WRITE")') IRET,I2
CALL BORT2(BORT_STR1,BORT_STR2)
END