<HTML> <BODY BGCOLOR=#ccccdd LINK=#0000aa VLINK=#0000ff ALINK=#ff0000 ><BASE TARGET="bottom_target"><PRE>
<A NAME='UFDUMP'><A href='../../html_code/bufr/ufdump.f.html#UFDUMP' TARGET='top_target'><IMG SRC="../../gif/bar_red.gif" border=0></A>
SUBROUTINE UFDUMP(LUNIT,LUPRT) 1
C$$$ SUBPROGRAM DOCUMENTATION BLOCK
C
C SUBPROGRAM: UFDUMP
C PRGMMR: WOOLLEN ORG: NP20 DATE: 2002-05-14
C
C ABSTRACT: THIS SUBROUTINE DUMPS A DETAILED PRINT LISTING OF THE
C CONTENTS OF THE UNPACKED DATA SUBSET CURRENTLY RESIDING IN THE
C INTERNAL ARRAYS ASSOCIATED WITH THE BUFR FILE IN LOGICAL UNIT LUNIT.
C LUNIT MUST HAVE BEEN OPENED FOR INPUT VIA A PREVIOUS CALL TO BUFR
C ARCHIVE LIBRARY SUBROUTINE OPENBF. THE DATA SUBSET MUST HAVE BEEN
C SUBSEQUENTLY READ INTO THE INTERNAL BUFR ARCHIVE LIBRARY ARRAYS VIA
C A CALL TO BUFR ARCHIVE LIBRARY SUBROUTINE READMG OR READERME,
<A NAME='READSB'><A href='../../html_code/bufr/ufdump.f.html#READSB' TARGET='top_target'><IMG SRC="../../gif/bar_red.gif" border=0></A>
C FOLLOWED BY A CALL TO BUFR ARCHIVE LIBRARY SUBROUTINE READSB (OR VIA 10,10
<A NAME='READNS'><A href='../../html_code/bufr/ufdump.f.html#READNS' TARGET='top_target'><IMG SRC="../../gif/bar_red.gif" border=0></A>
C A SINGLE CALL TO BUFR ARCHIVE LIBRARY SUBROUTINE READNS!). FOR A 9,7
C PARTICULAR SUBSET, THE PRINT LISTING CONTAINS EACH MNEMONIC
C ACCOMPANIED BY ITS CORRESPONDING DATA VALUE (INCLUDING THE ACTUAL
C BITS THAT WERE SET FOR FLAG TABLE VALUES!) AS WELL AS OTHER USEFUL
C IDENTIFICATION INFORMATION. THIS SUBROUTINE IS SIMILAR TO BUFR
C ARCHIVE LIBRARY SUBROUTINE UFBDMP EXCEPT THAT IT DOES NOT PRINT
C POINTERS, COUNTERS AND OTHER MORE ESOTERIC INFORMATION DESCRIBING
C THE INTERNAL SUBSET STRUCTURES. EACH SUBROUTINE, UFBDMP AND UFDUMP,
C IS USEFUL FOR DIFFERENT DIAGNOSTIC PURPOSES, BUT IN GENERAL UFDUMP
C IS MORE USEFUL FOR JUST LOOKING AT THE DATA ELEMENTS.
C
C PROGRAM HISTORY LOG:
C 2002-05-14 J. WOOLLEN -- ORIGINAL AUTHOR
C 2003-11-04 J. WOOLLEN -- MODIFIED TO HANDLE PRINT OF CHARACTER
C VALUES GREATER THAN EIGHT BYTES
C 2003-11-04 S. BENDER -- ADDED REMARKS/BUFRLIB ROUTINE
C INTERDEPENDENCIES
C 2003-11-04 D. KEYSER -- MAXJL (MAXIMUM NUMBER OF JUMP/LINK ENTRIES)
C INCREASED FROM 15000 TO 16000 (WAS IN
C VERIFICATION VERSION); UNIFIED/PORTABLE FOR
C WRF; ADDED DOCUMENTATION (INCLUDING
C HISTORY); OUTPUTS MORE COMPLETE DIAGNOSTIC
C INFO WHEN ROUTINE TERMINATES ABNORMALLY
C 2004-08-18 J. ATOR -- ADDED FUZZINESS TEST AND THRESHOLD FOR
C MISSING VALUE; ADDED INTERACTIVE AND
C SCROLLING CAPABILITY SIMILAR TO UFBDMP
C 2006-04-14 J. ATOR -- ADD CALL TO UPFTBV FOR FLAG TABLES TO GET
C ACTUAL BITS THAT WERE SET TO GENERATE VALUE
<A NAME='IBFMS'><A href='../../html_code/bufr/ufdump.f.html#IBFMS' TARGET='top_target'><IMG SRC="../../gif/bar_green.gif" border=0></A>
C 2007-01-19 J. ATOR -- USE FUNCTION IBFMS 2,53
C 2009-03-23 J. ATOR -- ADD LEVEL MARKERS TO OUTPUT FOR SEQUENCES
C WHERE THE REPLICATION COUNT IS > 1; OUTPUT
C ALL OCCURRENCES OF LONG CHARACTER STRINGS
C 2012-02-24 J. ATOR -- FIX MISSING CHECK FOR LONG CHARACTER STRINGS
C 2012-03-02 J. ATOR -- LABEL REDEFINED REFERENCE VALUES
C
C USAGE: CALL UFDUMP
(LUNIT, LUPRT)
C INPUT ARGUMENT LIST:
C LUNIT - INTEGER: FORTRAN LOGICAL UNIT NUMBER FOR BUFR FILE
C LUPRT - INTEGER: FORTRAN LOGICAL UNIT NUMBER FOR PRINT OUTPUT
C FILE
C 0 = LUPRT is set to 06
C
C OUTPUT FILES:
C IF LUPRT > 0: UNIT "LUPRT" - PRINT (IF LUPRT=6, STANDARD OUTPUT)
C IF LUPRT = 0: UNIT 06 - STANDARD OUTPUT PRINT
C
C REMARKS:
C THIS ROUTINE WILL SCROLL THROUGH THE DATA SUBSET, TWENTY ELEMENTS
C AT A TIME WHEN LUPRT IS INPUT AS "0". IN THIS CASE, THE EXECUTING
C SHELL SCRIPT SHOULD USE THE TERMINAL AS BOTH STANDARD INPUT AND
C STANDARD OUTPUT. INITIALLY, THE FIRST TWENTY ELEMENTS OF THE
C CURRENT UNPACKED SUBSET WILL BE DISPLAYED ON THE TERMIMAL,
C FOLLOWED BY THE PROMPT "(<enter> for MORE, q <enter> to QUIT)".
C IF THE TERMINAL ENTERS ANYTHING OTHER THAN "q" FOLLOWED BY
C "<enter>" (e.g., "<enter>"), THE NEXT TWENTY ELEMENTS WILL BE
C DISPLAYED, AGAIN FOLLOWED BY THE SAME PROMPT. THIS CONTINUES
C UNTIL EITHER THE ENTIRE SUBSET HAS BEEN DISPLAYED, OR THE TERMINAL
C ENTERS "q" FOLLOWED BY "<enter>" AFTER THE PROMPT, IN WHICH CASE
C THIS SUBROUTINE STOPS THE SCROLL AND RETURNS TO THE CALLING
C PROGRAM (PRESUMABLY TO READ IN THE NEXT SUBSET IN THE BUFR FILE).
C
C THIS ROUTINE CALLS: BORT ICBFMS IBFMS ISIZE
C NEMTAB READLC RJUST STATUS
C STRSUC UPFTBV
C THIS ROUTINE IS CALLED BY: None
C Normally called only by application
C programs.
C
C ATTRIBUTES:
C LANGUAGE: FORTRAN 77
C MACHINE: PORTABLE TO ALL PLATFORMS
C
C$$$
INCLUDE 'bufrlib.prm'
COMMON /MSGCWD/ NMSG(NFILES),NSUB(NFILES),MSUB(NFILES),
. INODE(NFILES),IDATE(NFILES)
COMMON /BTABLES/ MAXTAB,NTAB,TAG(MAXJL),TYP(MAXJL),KNT(MAXJL),
. JUMP(MAXJL),LINK(MAXJL),JMPB(MAXJL),
. IBT(MAXJL),IRF(MAXJL),ISC(MAXJL),
. ITP(MAXJL),VALI(MAXJL),KNTI(MAXJL),
. ISEQ(MAXJL,2),JSEQ(MAXJL)
COMMON /USRINT/ NVAL(NFILES),INV(MAXSS,NFILES),VAL(MAXSS,NFILES)
COMMON /TABABD/ NTBA(0:NFILES),NTBB(0:NFILES),NTBD(0:NFILES),
. MTAB(MAXTBA,NFILES),IDNA(MAXTBA,NFILES,2),
. IDNB(MAXTBB,NFILES),IDND(MAXTBD,NFILES),
. TABA(MAXTBA,NFILES),TABB(MAXTBB,NFILES),
. TABD(MAXTBD,NFILES)
COMMON /NRV203/ NNRV,INODNRV(MXNRV),NRV(MXNRV),TAGNRV(MXNRV),
. ISNRV(MXNRV),IENRV(MXNRV),IBTNRV,IPFNRV
CHARACTER*600 TABD
CHARACTER*128 TABB
CHARACTER*128 TABA
CHARACTER*80 FMT
CHARACTER*64 DESC
CHARACTER*24 UNIT
CHARACTER*120 LCHR2
CHARACTER*20 LCHR,PMISS
CHARACTER*15 NEMO3
CHARACTER*10 TAG,NEMO,NEMO2
CHARACTER*6 NUMB
CHARACTER*7 FMTF
CHARACTER*8 CVAL,TAGNRV
CHARACTER*3 TYP,TYPE
CHARACTER*1 TAB,YOU
EQUIVALENCE (RVAL,CVAL)
REAL*8 VAL,RVAL
LOGICAL TRACK,FOUND,RDRV
PARAMETER (MXFV=31)
INTEGER IFV(MXFV)
PARAMETER (MXSEQ=10)
INTEGER IDXREP(MXSEQ)
INTEGER NUMREP(MXSEQ)
CHARACTER*10 SEQNAM(MXSEQ)
PARAMETER (MXLS=10)
CHARACTER*10 LSNEMO(MXLS)
INTEGER LSCT(MXLS)
DATA PMISS /' MISSING'/
DATA YOU /'Y'/
C----------------------------------------------------------------------
C----------------------------------------------------------------------
NSEQ = 0
NLS = 0
IF(LUPRT.EQ.0) THEN
LUOUT = 6
ELSE
LUOUT = LUPRT
ENDIF
C CHECK THE FILE STATUS AND I-NODE
C --------------------------------
CALL STATUS(LUNIT,LUN,IL,IM)
IF(IL.EQ.0) GOTO 900
IF(IL.GT.0) GOTO 901
IF(IM.EQ.0) GOTO 902
IF(INODE(LUN).NE.INV(1,LUN)) GOTO 903
WRITE(LUOUT,*)
WRITE(LUOUT,*) 'MESSAGE TYPE ',TAG(INODE(LUN))
WRITE(LUOUT,*)
C DUMP THE CONTENTS OF COMMON /USRINT/ FOR UNIT LUNIT
C ---------------------------------------------------
DO NV=1,NVAL(LUN)
IF(LUPRT.EQ.0 .AND. MOD(NV,20).EQ.0) THEN
C When LUPRT=0, the output will be scrolled, 20 elements at a time
C ----------------------------------------------------------------
PRINT*,'(<enter> for MORE, q <enter> to QUIT)'
READ(5,'(A1)') YOU
C If the terminal enters "q" followed by "<enter>" after the prompt
C "(<enter> for MORE, q <enter> to QUIT)", scrolling will end and the
C subroutine will return to the calling program
C -------------------------------------------------------------------
IF(YOU.EQ.'q') THEN
PRINT*
PRINT*,'==> You have chosen to stop the dumping of this subset'
PRINT*
GOTO 100
ENDIF
ENDIF
NODE = INV (NV,LUN)
NEMO = TAG (NODE)
ITYP = ITP (NODE)
TYPE = TYP (NODE)
IF(ITYP.GE.1.AND.ITYP.LE.3) THEN
CALL NEMTAB(LUN,NEMO,IDN,TAB,N)
NUMB = TABB(N,LUN)(1:6)
DESC = TABB(N,LUN)(16:70)
UNIT = TABB(N,LUN)(71:94)
RVAL = VAL(NV,LUN)
ENDIF
IF((ITYP.EQ.0).OR.(ITYP.EQ.1)) THEN
C Sequence descriptor or delayed descriptor replication factor
IF((TYPE.EQ.'REP').OR.(TYPE.EQ.'DRP').OR.(TYPE.EQ.'DRB')) THEN
C Print the number of replications
NSEQ = NSEQ+1
IF(NSEQ.GT.MXSEQ) GOTO 904
IF(TYPE.EQ.'REP') THEN
NUMREP(NSEQ) = IRF(NODE)
ELSE
NUMREP(NSEQ) = NINT(RVAL)
ENDIF
CALL STRSUC(NEMO,NEMO2,LNM2)
FMT = '(11X,A,I6,1X,A)'
WRITE(LUOUT,FMT) NEMO2(1:LNM2), NUMREP(NSEQ), 'REPLICATIONS'
C How many times is this sequence replicated?
IF(NUMREP(NSEQ).GT.1) THEN
C Track the sequence
SEQNAM(NSEQ) = NEMO
IDXREP(NSEQ) = 1
ELSE
C Don't bother
NSEQ = NSEQ-1
ENDIF
ELSEIF( ((TYPE.EQ.'SEQ').OR.(TYPE.EQ.'RPC'))
. .AND. (NSEQ.GT.0) ) THEN
C Is this one of the sequences being tracked?
II = NSEQ
TRACK = .FALSE.
CALL STRSUC(NEMO,NEMO2,LNM2)
DO WHILE ((II.GE.1).AND.(.NOT.TRACK))
IF(INDEX(SEQNAM(II),NEMO2(1:LNM2)).GT.0) THEN
TRACK = .TRUE.
C Mark this level in the output
FMT = '(4X,A,2X,A,2X,A,I6,2X,A)'
WRITE(LUOUT,FMT) '++++++', NEMO2(1:LNM2),
. 'REPLICATION #', IDXREP(II), '++++++'
IF(IDXREP(II).LT.NUMREP(II)) THEN
C There are more levels to come
IDXREP(II) = IDXREP(II)+1
ELSE
C This was the last level for this sequence, so stop
C tracking it
NSEQ = NSEQ-1
ENDIF
ELSE
II = II-1
ENDIF
ENDDO
ENDIF
ELSEIF(ITYP.EQ.2) THEN
C Other numeric value
C First check if this node contains a redefined reference
C value. If so, modify the DESC field to label it as such.
JJ = 1
RDRV = .FALSE.
DO WHILE ((JJ.LE.NNRV).AND.(.NOT.RDRV))
IF (NODE.EQ.INODNRV(JJ)) THEN
RDRV = .TRUE.
DESC = 'NEW REFERENCE VALUE FOR ' // NUMB
UNIT = ' '
ELSE
JJ = JJ+1
ENDIF
ENDDO
C Now print the value
IF(IBFMS(RVAL).NE.0) THEN
C The value is "missing".
FMT = '(A6,2X,A10,2X,A20,2X,A24,6X,A48)'
WRITE(LUOUT,FMT) NUMB,NEMO,PMISS,UNIT,DESC
ELSE
FMT = '(A6,2X,A10,2X,F20.00,2X,A24,6X,A48)'
C Based upon the corresponding scale factor, select an
C appropriate format for the printing of this value.
WRITE(FMT(19:20),'(I2)') MAX(1,ISC(NODE))
IF(UNIT(1:4).EQ.'FLAG') THEN
C Print a listing of the bits corresponding to
C this value.
CALL UPFTBV(LUNIT,NEMO,RVAL,MXFV,IFV,NIFV)
IF(NIFV.GT.0) THEN
UNIT(11:11) = '('
IPT = 12
DO II=1,NIFV
ISZ = ISIZE(IFV(II))
WRITE(FMTF,'(A2,I1,A4)') '(I', ISZ, ',A1)'
IF((IPT+ISZ).LE.24) THEN
WRITE(UNIT(IPT:IPT+ISZ),FMTF) IFV(II), ','
IPT = IPT + ISZ + 1
ELSE
UNIT(12:23) = 'MANY BITS ON'
IPT = 25
ENDIF
ENDDO
UNIT(IPT-1:IPT-1) = ')'
ENDIF
ENDIF
WRITE(LUOUT,FMT) NUMB,NEMO,RVAL,UNIT,DESC
ENDIF
ELSEIF(ITYP.EQ.3) THEN
C Character (CCITT IA5) value
NCHR = IBT(NODE)/8
IF(IBFMS(RVAL).NE.0) THEN
LCHR = PMISS
ELSE IF(NCHR.LE.8) THEN
LCHR = CVAL
ELSE
C Track the number of occurrences of this long character string, so
C that we can properly output each one.
II = 1
FOUND = .FALSE.
DO WHILE((II.LE.NLS).AND.(.NOT.FOUND))
IF(NEMO.EQ.LSNEMO(II)) THEN
FOUND = .TRUE.
ELSE
II = II + 1
ENDIF
ENDDO
IF(.NOT.FOUND) THEN
NLS = NLS+1
IF(NLS.GT.MXLS) GOTO 905
LSNEMO(NLS) = NEMO
LSCT(NLS) = 1
NEMO3 = NEMO
ELSE
CALL STRSUC(NEMO,NEMO3,LNM3)
LSCT(II) = LSCT(II) + 1
WRITE(FMTF,'(A,I1,A)') '(2A,I', ISIZE(LSCT(II)), ')'
WRITE(NEMO3,FMTF) NEMO(1:LNM3), '#', LSCT(II)
ENDIF
CALL READLC(LUNIT,LCHR2,NEMO3)
IF (ICBFMS(LCHR2,NCHR).NE.0) THEN
LCHR = PMISS
ELSE
LCHR = LCHR2(1:20)
ENDIF
ENDIF
IF ( NCHR.LE.20 .OR. LCHR.EQ.PMISS ) THEN
IRET = RJUST(LCHR)
FMT = '(A6,2X,A10,2X,A20,2X,"(",I2,")",A24,2X,A48)'
WRITE(LUOUT,FMT) NUMB,NEMO,LCHR,NCHR,UNIT,DESC
ELSE
FMT = '(A6,2X,A10,2X,A,2X,"(",I3,")",A23,2X,A48)'
WRITE(LUOUT,FMT) NUMB,NEMO,LCHR2(1:NCHR),NCHR,UNIT,DESC
ENDIF
ENDIF
ENDDO
WRITE(LUOUT,3)
3 FORMAT(/' >>> END OF SUBSET <<< '/)
C EXITS
C -----
100 RETURN
900 CALL BORT('BUFRLIB: UFDUMP - INPUT BUFR FILE IS CLOSED, IT '//
. 'MUST BE OPEN FOR INPUT')
901 CALL BORT('BUFRLIB: UFDUMP - INPUT BUFR FILE IS OPEN FOR '//
. 'OUTPUT, IT MUST BE OPEN FOR INPUT')
902 CALL BORT('BUFRLIB: UFDUMP - A MESSAGE MUST BE OPEN IN INPUT '//
. 'BUFR FILE, NONE ARE')
903 CALL BORT('BUFRLIB: UFDUMP - LOCATION OF INTERNAL TABLE FOR '//
. 'INPUT BUFR FILE DOES NOT AGREE WITH EXPECTED LOCATION IN '//
. 'INTERNAL SUBSET ARRAY')
904 CALL BORT('BUFRLIB: UFDUMP - MXSEQ OVERFLOW')
905 CALL BORT('BUFRLIB: UFDUMP - MXLS OVERFLOW')
END