<HTML> <BODY BGCOLOR=#ccccdd LINK=#0000aa VLINK=#0000ff ALINK=#ff0000 ><BASE TARGET="bottom_target"><PRE>
!
! RTV_Define
!
! Module containing the intermediate variables for RTSolution module.
!
!
! NOTE: Modified as generic "bucket" for all RT-related algorithm,
! ADA, AMOM, and SOI.
! This is initial step in truly separating out the algorithms
! into their own modules. Currently each algorithm ties into
! the same RTV components (not good.)
!
!
!
! CREATION HISTORY:
! Written by: Quanhua Liu, QSS at JCSDA; Quanhua.Liu@noaa.gov
! Yong Han, NOAA/NESDIS; Yong.Han@noaa.gov
! Paul van Delst, paul.vandelst@noaa.gov
! 08-Jun-2004
<A NAME='RTV_DEFINE'><A href='../../html_code/crtm/RTV_Define.f90.html#RTV_DEFINE' TARGET='top_target'><IMG SRC="../../gif/bar_purple.gif" border=0></A>
MODULE RTV_Define 9,5
! ------------------
! Environment set up
! ------------------
! Module use statements
USE Type_Kinds
, ONLY: fp
USE Message_Handler, ONLY: SUCCESS, FAILURE, Display_Message
USE CRTM_Parameters, ONLY: SET, ZERO, ONE, TWO, PI, &
MAX_N_LAYERS, MAX_N_ANGLES, MAX_N_LEGENDRE_TERMS, &
DEGREES_TO_RADIANS, &
SECANT_DIFFUSIVITY, &
SCATTERING_ALBEDO_THRESHOLD, &
OPTICAL_DEPTH_THRESHOLD, &
RT_ADA
USE SensorInfo_Parameters, ONLY: INVALID_SENSOR
USE CRTM_SfcOptics, ONLY: SOVar_type => iVar_type
! Disable all implicit typing
IMPLICIT NONE
! --------------------
! Default visibilities
! --------------------
! Everything private by default
PRIVATE
! Parameters
PUBLIC :: ANGLE_THRESHOLD
PUBLIC :: PHASE_THRESHOLD
PUBLIC :: DELTA_OPTICAL_DEPTH
PUBLIC :: MAX_ALBEDO
PUBLIC :: SMALL_OD_FOR_SC
PUBLIC :: MAX_N_DOUBLING
PUBLIC :: MAX_N_SOI_ITERATIONS
! Datatypes
PUBLIC :: aircraft_rt_type
PUBLIC :: RTV_type
! Procedures
PUBLIC :: RTV_Associated
PUBLIC :: RTV_Destroy
PUBLIC :: RTV_Create
! -----------------
! Module parameters
! -----------------
! Version Id for the module
CHARACTER(*), PARAMETER :: MODULE_RCS_ID = &
'$Id: RTV_Define.f90 29405 2013-06-20 20:19:52Z paul.vandelst@noaa.gov $'
! Threshold for determing if an additional stream
! angle is required for the satellite zenith angle
REAL(fp), PARAMETER :: ANGLE_THRESHOLD = 1.0e-7_fp
! Small positive value used to replace negative
! values in the computed phase function
REAL(fp), PARAMETER :: PHASE_THRESHOLD = 1.0e-7_fp
REAL(fp), PARAMETER :: DELTA_OPTICAL_DEPTH = 1.0e-8_fp
REAL(fp), PARAMETER :: MAX_ALBEDO = 0.999999_fp
! Threshold layer optical depth for single scattering
REAL(fp), PARAMETER :: SMALL_OD_FOR_SC = 1.E-5_fp
! The maximum number of doubling processes in the
! the doubling-adding scheme.
INTEGER, PARAMETER :: MAX_N_DOUBLING = 55
! The maximum number of iterations for the SOI solution method.
INTEGER, PARAMETER :: MAX_N_SOI_ITERATIONS = 75
! ---------------------
! Structure definitions
! ---------------------
! ...Aircraft model structure
TYPE :: aircraft_rt_type
! The switch
LOGICAL :: rt = .FALSE.
! The output level index
INTEGER :: idx
END TYPE aircraft_rt_type
! --------------------------------------
! Structure definition to hold forward
! variables across FWD, TL, and AD calls
! --------------------------------------
TYPE :: RTV_type
! Type of sensor
INTEGER :: Sensor_Type = INVALID_SENSOR
! Type of RT algorithm
INTEGER :: RT_Algorithm_Id = RT_ADA
! Dimension information
INTEGER :: n_Layers = 0 ! Total number of atmospheric layers
INTEGER :: n_Added_Layers = 0 ! Number of layers appended to TOA
INTEGER :: n_Angles = 0 ! Number of angles to be considered
INTEGER :: n_SOI_Iterations = 0 ! Number of SOI iterations
REAL(fp):: COS_SUN = ZERO ! Cosine of sun zenith angle
REAL(fp):: Solar_irradiance = ZERO ! channel solar iiradiance at TOA
REAL(fp):: Cosmic_Background_Radiance = ZERO ! For background temp=2.7253
! Variable to hold the various portions of the
! radiance for emissivity retrieval algorithms
! Passed to FWD RTSolution structure argument output
REAL(fp) :: Up_Radiance = ZERO
REAL(fp) :: Down_Solar_Radiance = ZERO
REAL(fp) :: Secant_Down_Angle = 0
! Emission model variables
REAL(fp) :: Total_OD = ZERO
REAL(fp), DIMENSION( MAX_N_LAYERS ) :: e_Layer_Trans_UP = ZERO
REAL(fp), DIMENSION( MAX_N_LAYERS ) :: e_Layer_Trans_DOWN = ZERO
REAL(fp), DIMENSION( 0:MAX_N_LAYERS ) :: e_Level_Rad_UP = ZERO
REAL(fp), DIMENSION( 0:MAX_N_LAYERS ) :: e_Level_Rad_DOWN = ZERO
REAL(fp), DIMENSION( MAX_N_LAYERS ) :: Overcast = ZERO
! Planck radiances
REAL(fp) :: Planck_Surface = ZERO
REAL(fp), DIMENSION( 0:MAX_N_LAYERS ) :: Planck_Atmosphere = ZERO
! Quadrature information
REAL(fp), DIMENSION( MAX_N_ANGLES ) :: COS_Angle = ZERO ! Gaussian quadrature abscissa
REAL(fp), DIMENSION( MAX_N_ANGLES ) :: COS_Weight = ZERO ! Gaussian quadrature weights
! Logical switches
LOGICAL :: Diffuse_Surface = .TRUE.
LOGICAL :: Is_Solar_Channel = .FALSE.
! Aircraft model RT information
TYPE(aircraft_rt_type) :: aircraft
! Scattering, visible model variables
INTEGER :: n_Streams = 0 ! Number of *hemispheric* stream angles used in RT
INTEGER :: mth_Azi ! mth fourier component
INTEGER :: n_Azi ! number of fourier components
LOGICAL :: Solar_Flag_true = .FALSE.
LOGICAL :: Visible_Flag_true = .FALSE.
LOGICAL :: Scattering_RT = .FALSE.
!-----------------------------------
! Variables used in the ADA routines
!-----------------------------------
! Flag to indicate the following arrays have all been allocated
LOGICAL :: Is_Allocated = .FALSE.
! Phase function variables
! Forward and backward scattering phase matrices
REAL(fp), ALLOCATABLE :: Pff(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES+1, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: Pbb(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES+1, MAX_N_LAYERS
! Positive and negative cosine angle Legendre phase functions
REAL(fp), ALLOCATABLE :: Pplus(:,:) ! 0:MAX_N_LEGENDRE_TERMS, MAX_N_ANGLES
REAL(fp), ALLOCATABLE :: Pminus(:,:) ! 0:MAX_N_LEGENDRE_TERMS, MAX_N_ANGLES
REAL(fp), ALLOCATABLE :: Pleg(:,:) ! 0:MAX_N_LEGENDRE_TERMS, MAX_N_ANGLES+1
! Original forward and backward scattering phase matrices.
! These may be slightly negative and, if so, need to be made
! positive and thus adjusted to ensure energy conservation
REAL(fp), ALLOCATABLE :: Off(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES+1, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: Obb(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES+1, MAX_N_LAYERS
! Normalisation factor and intermediate sum used for original
! phase matrix energy conservation.
REAL(fp), ALLOCATABLE :: n_Factor(:,:) ! MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: sum_fac(:,:) ! 0:MAX_N_ANGLES, MAX_N_LAYERS
! Adding-Doubling model variables
REAL(fp), ALLOCATABLE :: Inv_Gamma(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: Inv_GammaT(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: Refl_Trans(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: s_Layer_Trans(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: s_Layer_Refl(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: s_Level_Refl_UP(:,:,:) ! MAX_N_ANGLES, MAX_N_ANGLES, 0:MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: s_Level_Rad_UP(:,:) ! MAX_N_ANGLES, 0:MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: s_Layer_Source_UP(:,:) ! MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: s_Layer_Source_DOWN(:,:) ! MAX_N_ANGLES, MAX_N_LAYERS
!------------------------------------
! Variables used in the AMOM routines
!------------------------------------
! dimensions, MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: Thermal_C(:,:)
REAL(fp), ALLOCATABLE :: EigVa(:,:)
REAL(fp), ALLOCATABLE :: Exp_x(:,:)
REAL(fp), ALLOCATABLE :: EigValue(:,:)
! dimensions, MAX_N_ANGLES, MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: HH(:,:,:)
REAL(fp), ALLOCATABLE :: PM(:,:,:)
REAL(fp), ALLOCATABLE :: PP(:,:,:)
REAL(fp), ALLOCATABLE :: PPM(:,:,:)
REAL(fp), ALLOCATABLE :: PPP(:,:,:)
REAL(fp), ALLOCATABLE :: i_PPM(:,:,:)
REAL(fp), ALLOCATABLE :: i_PPP(:,:,:)
REAL(fp), ALLOCATABLE :: EigVe(:,:,:)
REAL(fp), ALLOCATABLE :: Gm(:,:,:)
REAL(fp), ALLOCATABLE :: i_Gm(:,:,:)
REAL(fp), ALLOCATABLE :: Gp(:,:,:)
REAL(fp), ALLOCATABLE :: EigVeF(:,:,:)
REAL(fp), ALLOCATABLE :: EigVeVa(:,:,:)
REAL(fp), ALLOCATABLE :: A1(:,:,:)
REAL(fp), ALLOCATABLE :: A2(:,:,:)
REAL(fp), ALLOCATABLE :: A3(:,:,:)
REAL(fp), ALLOCATABLE :: A4(:,:,:)
REAL(fp), ALLOCATABLE :: A5(:,:,:)
REAL(fp), ALLOCATABLE :: A6(:,:,:)
REAL(fp), ALLOCATABLE :: Gm_A5(:,:,:)
REAL(fp), ALLOCATABLE :: i_Gm_A5(:,:,:)
!-----------------------------------
! Variables used in the SOI routines
!-----------------------------------
INTEGER :: Number_SOI_Iter = 0
REAL(fp), ALLOCATABLE :: e_Layer_Trans(:,:) ! MAX_N_ANGLES, MAX_N_LAYERS
REAL(fp), ALLOCATABLE :: s_Level_IterRad_DOWN(:,:,:) ! MAX_N_ANGLES, 0:MAX_N_LAYERS, MAX_N_SOI_ITERATIONS
REAL(fp), ALLOCATABLE :: s_Level_IterRad_UP(:,:,:) ! MAX_N_ANGLES, 0:MAX_N_LAYERS, MAX_N_SOI_ITERATIONS
INTEGER , ALLOCATABLE :: Number_Doubling(:) ! n_Layers
REAL(fp), ALLOCATABLE :: Delta_Tau(:) ! n_Layers
REAL(fp), ALLOCATABLE :: Refl(:,:,:,:) ! n_Angles, n_Angles, 0:MAX_N_DOUBLING, n_Layers
REAL(fp), ALLOCATABLE :: Trans(:,:,:,:) ! n_Angles, n_Angles, 0:MAX_N_DOUBLING, n_Layers
REAL(fp), ALLOCATABLE :: Inv_BeT(:,:,:,:) ! n_Angles, n_Angles, 0:MAX_N_DOUBLING, n_Layers
REAL(fp), ALLOCATABLE :: C1(:,:) ! n_Angles, n_Layers
REAL(fp), ALLOCATABLE :: C2(:,:) ! n_Angles, n_Layers
! The surface optics forward variables
TYPE(SOVar_type) :: SOV
END TYPE RTV_type
CONTAINS
!################################################################################
!################################################################################
!## ##
!## ## PRIVATE MODULE ROUTINES ## ##
!## ##
!################################################################################
!################################################################################
!--------------------------------------------------------------------------------
!:sdoc+:
!
! NAME:
! RTV_Associated
!
! PURPOSE:
! Elemental function to test if the allocatable components of an
! RTV object have been allocated.
!
! CALLING SEQUENCE:
! Status = RTV_Associated( RTV )
!
! OBJECTS:
! RTV: RTV structure which is to have its member's
! status tested.
! UNITS: N/A
! TYPE: RTV_type
! DIMENSION: Scalar or any rank
! ATTRIBUTES: INTENT(IN)
!
! FUNCTION RESULT:
! Status: The return value is a logical value indicating the
! status of the RTV members.
! .TRUE. - if ANY of the RTV allocatable or
! pointer members are in use.
! .FALSE. - if ALL of the RTV allocatable or
! pointer members are not in use.
! UNITS: N/A
! TYPE: LOGICAL
! DIMENSION: Same as input RTV argument
!
!:sdoc-:
!--------------------------------------------------------------------------------
<A NAME='RTV_ASSOCIATED'><A href='../../html_code/crtm/RTV_Define.f90.html#RTV_ASSOCIATED' TARGET='top_target'><IMG SRC="../../gif/bar_green.gif" border=0></A>
ELEMENTAL FUNCTION RTV_Associated( RTV ) RESULT( Status )
! Arguments
TYPE(RTV_type), INTENT(IN) :: RTV
! Function result
LOGICAL :: Status
! Test the structure members
Status = RTV%Is_Allocated
END FUNCTION RTV_Associated
!--------------------------------------------------------------------------------
!:sdoc+:
!
! NAME:
! RTV_Destroy
!
! PURPOSE:
! Elemental subroutine to re-initialize RTV objects.
!
! CALLING SEQUENCE:
! CALL RTV_Destroy( RTV )
!
! OBJECTS:
! RTV: Re-initialized RTV structure.
! UNITS: N/A
! TYPE: RTV_type
! DIMENSION: Scalar OR any rank
! ATTRIBUTES: INTENT(OUT)
!
!:sdoc-:
!--------------------------------------------------------------------------------
<A NAME='RTV_DESTROY'><A href='../../html_code/crtm/RTV_Define.f90.html#RTV_DESTROY' TARGET='top_target'><IMG SRC="../../gif/bar_red.gif" border=0></A>
ELEMENTAL SUBROUTINE RTV_Destroy( RTV ) 4
TYPE(RTV_type), INTENT(OUT) :: RTV
! Belts and braces
RTV%Is_Allocated = .FALSE.
END SUBROUTINE RTV_Destroy
!--------------------------------------------------------------------------------
!:sdoc+:
!
! NAME:
! RTV_Create
!
! PURPOSE:
! Elemental subroutine to create an instance of the RTV object.
!
! CALLING SEQUENCE:
! CALL RTV_Create( RTV, &
! n_Angles , &
! n_Legendre_Terms, &
! n_Layers )
!
! OBJECTS:
! RTV: RTV structure.
! UNITS: N/A
! TYPE: RTV_type
! DIMENSION: Scalar or any rank
! ATTRIBUTES: INTENT(OUT)
!
! INPUTS:
! n_Angles: Number of
! Must be > 0.
! UNITS: N/A
! TYPE: INTEGER
! DIMENSION: Same as RTV object
! ATTRIBUTES: INTENT(IN)
!
! n_Legendre_Terms: Number of
! Must be > 0.
! UNITS: N/A
! TYPE: INTEGER
! DIMENSION: Same as RTV object
! ATTRIBUTES: INTENT(IN)
!
! n_Layers: Number of atmospheric layers.
! Must be > 0.
! UNITS: N/A
! TYPE: INTEGER
! DIMENSION: Same as RTV object
! ATTRIBUTES: INTENT(IN)
!
!:sdoc-:
!--------------------------------------------------------------------------------
<A NAME='RTV_CREATE'><A href='../../html_code/crtm/RTV_Define.f90.html#RTV_CREATE' TARGET='top_target'><IMG SRC="../../gif/bar_red.gif" border=0></A>
ELEMENTAL SUBROUTINE RTV_Create( & 4
RTV, &
n_Angles , &
n_Legendre_Terms, &
n_Layers )
! Arguments
TYPE(RTV_type), INTENT(OUT) :: RTV
INTEGER , INTENT(IN) :: n_Angles
INTEGER , INTENT(IN) :: n_Legendre_Terms
INTEGER , INTENT(IN) :: n_Layers
! Local variables
INTEGER :: alloc_stat
! Check input
IF ( n_Angles < 1 .OR. n_Legendre_Terms < 1 .OR. n_Layers < 1 ) RETURN
! Perform the allocation for phase function variables
ALLOCATE( RTV%Pff(n_Angles, n_Angles+1, n_Layers) , &
RTV%Pbb(n_Angles, n_Angles+1, n_Layers) , &
RTV%Pplus( 0:n_Legendre_Terms, n_Angles), &
RTV%Pminus(0:n_Legendre_Terms, n_Angles), &
RTV%Pleg(0:n_Legendre_Terms, n_Angles+1), &
RTV%Off(n_Angles, n_Angles+1, n_Layers) , &
RTV%Obb(n_Angles, n_Angles+1, n_Layers) , &
RTV%n_Factor (n_Angles, n_Layers) , &
RTV%sum_fac(0:n_Angles, n_Layers) , &
STAT = alloc_stat )
IF ( alloc_stat /= 0 ) RETURN
! Perform the allocation for adding-doubling variables
ALLOCATE( RTV%Inv_Gamma( n_Angles, n_Angles, n_Layers) , &
RTV%Inv_GammaT(n_Angles, n_Angles, n_Layers) , &
RTV%Refl_Trans(n_Angles, n_Angles, n_Layers) , &
RTV%s_Layer_Trans(n_Angles, n_Angles, n_Layers) , &
RTV%s_Layer_Refl( n_Angles, n_Angles, n_Layers) , &
RTV%s_Level_Refl_UP(n_Angles, n_Angles, 0:n_Layers), &
RTV%s_Level_Rad_UP(n_Angles, 0:n_Layers) , &
RTV%s_Layer_Source_UP( n_Angles, n_Layers) , &
RTV%s_Layer_Source_DOWN(n_Angles, n_Layers) , &
STAT = alloc_stat )
IF ( alloc_stat /= 0 ) RETURN
! Perform the allocation for AMOM variables
ALLOCATE( RTV%Thermal_C(n_Angles, n_Layers) , &
RTV%EigVa(n_Angles, n_Layers) , &
RTV%Exp_x(n_Angles, n_Layers) , &
RTV%EigValue(n_Angles, n_Layers) , &
RTV%HH(n_Angles, n_Angles, n_Layers) , &
RTV%PM(n_Angles, n_Angles, n_Layers) , &
RTV%PP(n_Angles, n_Angles, n_Layers) , &
RTV%PPM(n_Angles, n_Angles, n_Layers) , &
RTV%PPP(n_Angles, n_Angles, n_Layers) , &
RTV%i_PPM(n_Angles, n_Angles, n_Layers) , &
RTV%i_PPP(n_Angles,n_Angles,n_Layers) , &
RTV%EigVe(n_Angles, n_Angles, n_Layers) , &
RTV%Gm(n_Angles, n_Angles, n_Layers) , &
RTV%i_Gm(n_Angles, n_Angles, n_Layers) , &
RTV%Gp(n_Angles, n_Angles, n_Layers) , &
RTV%EigVeF(n_Angles, n_Angles, n_Layers) , &
RTV%EigVeVa(n_Angles,n_Angles,n_Layers) , &
RTV%A1(n_Angles,n_Angles, n_Layers) , &
RTV%A2(n_Angles, n_Angles, n_Layers) , &
RTV%A3(n_Angles, n_Angles, n_Layers) , &
RTV%A4(n_Angles, n_Angles, n_Layers) , &
RTV%A5(n_Angles, n_Angles, n_Layers) , &
RTV%A6(n_Angles, n_Angles, n_Layers) , &
RTV%Gm_A5(n_Angles, n_Angles, n_Layers) , &
RTV%i_Gm_A5(n_Angles, n_Angles, n_Layers), &
STAT = alloc_stat )
IF ( alloc_stat /= 0 ) RETURN
! Perform the allocation for SOI variables
ALLOCATE( RTV%e_Layer_Trans( n_Angles, n_Layers), &
RTV%s_Level_IterRad_DOWN( n_Angles, 0:n_Layers, MAX_N_SOI_ITERATIONS ), &
RTV%s_Level_IterRad_UP( n_Angles, 0:n_Layers, MAX_N_SOI_ITERATIONS ), &
RTV%Number_Doubling(n_Layers), &
RTV%Delta_Tau(n_Layers), &
RTV%Refl(n_Angles, n_Angles, 0:MAX_N_DOUBLING, n_Layers), &
RTV%Trans(n_Angles, n_Angles, 0:MAX_N_DOUBLING, n_Layers), &
RTV%Inv_BeT(n_Angles, n_Angles, 0:MAX_N_DOUBLING, n_Layers), &
RTV%C1(n_Angles, n_Layers), &
RTV%C2(n_Angles, n_Layers), &
STAT = alloc_stat )
IF ( alloc_stat /= 0 ) RETURN
! Set dimensions
RTV%n_Layers = n_Layers
RTV%n_Angles = n_Angles
RTV%n_SOI_Iterations = 0
! Set the allocate flag
RTV%Is_Allocated = .TRUE.
END SUBROUTINE RTV_Create
END MODULE RTV_Define